[PATCH] ARM: dts: imx6: Add support for Logic PD SOM and Baseboard

[aford173@gmail.com (aford173 at gmail.com)]

From: Adam Ford <adam.ford@logicpd.com>

The system on module (SOM) specific portions are in the .dtsi
while the baseboard specific portions are in the .dts file.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
new file mode 100644
index 0000000..6f1663e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -0,0 +1,389 @@
+/*
+ * Copyright 2016 Logic PD
+ * This file is adapted from imx6qdl-sabresd.dts.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+
+#include "imx6qdl-logicpd.dtsi"
+
+/ {
+	model = "Logic PD Acuity SOM";
+	compatible = "fsl,imx6q";
+
+	aliases {
+		display = &lcd_display;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		gen_led0 {
+			label = "cpu0";
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+		gen_led1 {
+			label = "cpu1";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu1";
+		};
+		gen_led2 {
+			label = "heartbeat";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		gen_led3 {
+			label = "Always On";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_3v3: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "reg_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		recovery-button {
+			label = "Recover";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <0x198>;
+		};
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		status = "okay";
+		display-timings {
+			native-mode = <&type15_timing>;
+			type15_timing: type_15 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <3>;
+				hback-porch = <2>;
+				hsync-len = <42>;
+				vback-porch = <3>;
+				vfront-porch = <2>;
+				vsync-len = <11>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port at 0 {
+			reg = <0>;
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+		port at 1 {
+			reg = <1>;
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,at043tn24", "simple-panel";
+		enable-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lcd>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "hsic";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	/* TODO: Initialize Ref clock at 50MHz so the reset can work */
+	/*phy-reset-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; */
+	/* phy-reset-duration = <2>; */
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&i2c3 {
+	touchscreen: tsc2004 at 48 {
+		compatible = "ti,tsc2004";
+		vio-supply = <&reg_3v3>;
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		reset-gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-logicpd-baseboard {
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_RTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0	/* USB_OTG_PWR_EN */
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0	/* USB_H1_PWR_EN */
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x13030
+				MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x17030
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN    0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0   0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1   0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0 /* Ethernet Reset */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x130b0
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x130b0
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x130b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+			>;
+		};
+
+		pinctrl_touchscreen: touchscreengrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10	/* R_LCD_DCLK */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17			0x100b0	/* R_LCD_PANEL_PWR */
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02			0x10	/* R_LCD_HSYNC */
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03			0x10	/* R_LCD_VSYNC */
+				MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04			0x10	/* R_LCD_MDISP */
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x100b0	/* R_LCD_BACKLIGHT_PWR */
+		    >;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+		    fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		    >;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/imx6qdl-logicpd.dtsi b/arch/arm/boot/dts/imx6qdl-logicpd.dtsi
new file mode 100644
index 0000000..dc28925
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-logicpd.dtsi
@@ -0,0 +1,452 @@
+/*
+ * Copyright 2016 Logic PD
+ * This file is adapted from imx6qdl-sabresd.dtsi.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pfuze100 at 08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_adj_1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	user_eeprom: at24 at 52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	mfg_eeprom: at24 at 51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;
+		reg = <0x51>;
+	};
+
+	temp_sense0: tmp102 at 4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	temp_sense1: tmp102 at 40 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-acuity {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL		0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15		0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x1b0b0
+
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x80000000
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x80000000
+				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x80000000
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000
+				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x80000000
+				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x80000000
+				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x80000000
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x80000000
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x80000000
+				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x80000000
+				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x80000000
+				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x80000000
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x80000000
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x80000000
+				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x80000000
+				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x80000000
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x80000000
+				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x80000000
+				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x80000000
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x80000000
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x80000000
+
+
+
+
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x80000000
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000
+				MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x80000000
+
+
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
+
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x80000000
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000
+
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x80000000
+
+
+
+
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000
+
+				MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x80000000
+				MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x80000000
+				MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x80000000
+				MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x80000000
+				MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x80000000
+				MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x80000000
+				MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x80000000
+				MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x80000000
+
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x1f0b0 /* WL_IRQ */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1f0b0 /* WLAN_EN */
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1f0b0	/* BT_EN */
+				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x80000000
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+			>;
+		};
+
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			>;
+		};
+
+
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+			>;
+		};
+
+
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_tempsense: tempsensegrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0	/* Temp Sense Alert */
+			>;
+		};
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore at 0 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+
-- 
2.7.4