All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Wang <frank.wang@rock-chips.com>
To: heiko@sntech.de, dianders@chromium.org, linux@roeck-us.net,
	groeck@chromium.org, jwerner@chromium.org, kishon@ti.com,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-rockchip@lists.infradead.org,
	xzy.xu@rock-chips.com, kever.yang@rock-chips.com,
	huangtao@rock-chips.com, william.wu@rock-chips.com,
	daniel.meng@rock-chips.com, frank.wang@rock-chips.com
Subject: [PATCH v9 3/4] arm64: dts: rockchip: add usb2-phy support for rk3399
Date: Fri, 22 Jul 2016 15:00:45 +0800	[thread overview]
Message-ID: <1469170846-15617-4-git-send-email-frank.wang@rock-chips.com> (raw)
In-Reply-To: <1469170846-15617-1-git-send-email-frank.wang@rock-chips.com>

Add usb2-phy nodes and specify phys phandle for ehci.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---

Changes in v9:
 - Move the usb gpio config to rk3399-evb.dts
 - Fix ehci phy-names property.

 arch/arm64/boot/dts/rockchip/rk3399.dtsi |   42 +++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d7f8e06..843d51c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -221,6 +221,8 @@
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -239,6 +241,8 @@
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -481,8 +485,44 @@
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy0: usb2-phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2-phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
 	};
 
 	watchdog@ff840000 {
-- 
1.7.9.5

  parent reply	other threads:[~2016-07-22  7:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-22  7:00 [PATCH v9 0/4] Add a new Rockchip usb2 phy driver Frank Wang
2016-07-22  7:00 ` Frank Wang
2016-07-22  7:00 ` [PATCH v9 1/4] Documentation: bindings: add DT documentation for Rockchip USB2PHY Frank Wang
2016-07-22  7:00   ` Frank Wang
2016-07-22  7:00 ` [PATCH v9 2/4] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy Frank Wang
2016-08-12 10:09   ` Kishon Vijay Abraham I
2016-08-12 10:09     ` Kishon Vijay Abraham I
2016-07-22  7:00 ` Frank Wang [this message]
2016-08-03 19:34   ` [PATCH v9 3/4] arm64: dts: rockchip: add usb2-phy support for rk3399 Heiko Stübner
2016-08-03 19:34     ` Heiko Stübner
2016-08-17  9:53   ` Heiko Stübner
2016-07-22  7:00 ` [PATCH v9 4/4] arm64: dts: rockchip: configure usb2-phy support for rk3399-evb Frank Wang
2016-08-17 10:02   ` Heiko Stübner
2016-08-18  2:53     ` Frank Wang
2016-08-18  2:53       ` Frank Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469170846-15617-4-git-send-email-frank.wang@rock-chips.com \
    --to=frank.wang@rock-chips.com \
    --cc=daniel.meng@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=galak@codeaurora.org \
    --cc=groeck@chromium.org \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jwerner@chromium.org \
    --cc=kever.yang@rock-chips.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=william.wu@rock-chips.com \
    --cc=xzy.xu@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.