From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
Javier Martinez Canillas <javier@osg.samsung.com>
Subject: [PATCH 10/10] ARM: dts: omap3/4/5/dra7: remove unneeded unit name for gpio-leds nodes
Date: Mon, 1 Aug 2016 12:47:04 -0400 [thread overview]
Message-ID: <1470070024-30281-11-git-send-email-javier@osg.samsung.com> (raw)
In-Reply-To: <1470070024-30281-1-git-send-email-javier@osg.samsung.com>
This patch fixes the following DTC warnings for many boards:
"Node /leds/led@1 has a unit name, but no reg property"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm/boot/dts/dra7-evm.dts | 8 ++++----
arch/arm/boot/dts/omap3-pandora-common.dtsi | 8 ++++----
arch/arm/boot/dts/omap5-board-common.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index bafcfac067ec..d47c8739bdaa 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -105,25 +105,25 @@
leds {
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "dra7:usr1";
gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@1 {
+ led1 {
label = "dra7:usr2";
gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "dra7:usr3";
gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@3 {
+ led3 {
label = "dra7:usr4";
gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index dbc4dc721cc2..af30d4d99307 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -45,28 +45,28 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- led@1 {
+ led1 {
label = "pandora::sd1";
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@2 {
+ led2 {
label = "pandora::sd2";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
linux,default-trigger = "mmc1";
default-state = "off";
};
- led@3 {
+ led3 {
label = "pandora::bluetooth";
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
linux,default-trigger = "heartbeat";
default-state = "off";
};
- led@4 {
+ led4 {
label = "pandora::wifi";
gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
linux,default-trigger = "mmc2";
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 5196113202a2..d1f5ce3d3651 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -79,7 +79,7 @@
leds {
compatible = "gpio-leds";
- led@1 {
+ led1 {
label = "omap5:blue:usr1";
gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index a9765605d53b..fe724da3ec0d 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -72,7 +72,7 @@
leds {
compatible = "gpio-leds";
- led@1 {
+ led1 {
label = "Heartbeat";
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
linux,default-trigger = "heartbeat";
--
2.5.5
next prev parent reply other threads:[~2016-08-01 16:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-01 16:46 [PATCH 00/10] ARM: dts: omap: another round of DTC warning fixes Javier Martinez Canillas
2016-08-01 16:46 ` [PATCH 01/10] ARM: dts: omap3/am4372: add missing unit name to ocp node Javier Martinez Canillas
2016-08-01 16:46 ` [PATCH 02/10] ARM: dts: omap3: overo: add missing unit name for lcd35 display Javier Martinez Canillas
2016-08-01 16:46 ` [PATCH 03/10] ARM: dts: am335x/am437x: remove unneeded unit name for gpio-matrix-keypad Javier Martinez Canillas
2016-08-01 16:46 ` [PATCH 04/10] ARM: dts: am335x/am437x: remove unneeded unit name for fixed regulators Javier Martinez Canillas
2016-08-01 16:46 ` [PATCH 05/10] ARM: dts: da850/dm81x: " Javier Martinez Canillas
2016-08-01 16:47 ` [PATCH 06/10] ARM: dts: omap3/dra62x: " Javier Martinez Canillas
2016-08-01 16:47 ` [PATCH 07/10] ARM: dts: am335x/am437x: remove unneeded unit name for gpio-keys nodes Javier Martinez Canillas
2016-08-01 16:47 ` [PATCH 08/10] ARM: dts: omap3/4: " Javier Martinez Canillas
2016-08-01 16:47 ` [PATCH 09/10] ARM: dts: am335x/437x/57xx: remove unneeded unit name for gpio-leds nodes Javier Martinez Canillas
2016-08-01 16:47 ` Javier Martinez Canillas [this message]
2016-08-15 16:43 ` [PATCH 00/10] ARM: dts: omap: another round of DTC warning fixes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470070024-30281-11-git-send-email-javier@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.