From: Sebastian Reichel <sre@kernel.org> To: Sebastian Reichel <sre@kernel.org>, Tony Lindgren <tony@atomide.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Marcel Holtmann <marcel@holtmann.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Jiri Slaby <jslaby@suse.com> Cc: "Ville Tervo" <ville.tervo@iki.fi>, "Filip Matijević" <filip.matijevic.pz@gmail.com>, "Aaro Koskinen" <aaro.koskinen@iki.fi>, "Pavel Machek" <pavel@ucw.cz>, "Pali Rohár" <pali.rohar@gmail.com>, ivo.g.dimitrov.75@gmail.com, linux-bluetooth@vger.kernel.org, linux-serial@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC 7/7] ARM: dts: OMAP3-N950: Add bluetooth Date: Sat, 13 Aug 2016 05:14:38 +0200 [thread overview] Message-ID: <1471058078-5579-8-git-send-email-sre@kernel.org> (raw) In-Reply-To: <1471058078-5579-1-git-send-email-sre@kernel.org> --- arch/arm/boot/dts/omap3-n950-n9.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 927b17fc4ed8..7c0c53e2f679 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -58,6 +58,13 @@ pinctrl-0 = <&debug_leds>; }; }; + + /* controlled (enabled/disabled) directly by wl1271 */ + vctcxo: vctcxo { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; }; &omap3_pmx_core { @@ -125,6 +132,16 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + >; + }; + }; &omap3_pmx_core2 { @@ -435,3 +452,20 @@ &ssi_port2 { status = "disabled"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "nokia,ti,wl1271-bluetooth"; + + reset-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; /* 26 */ + host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ + bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ + + clocks = <&vctcxo>; + clock-names = "sysclk"; + }; + +}; -- 2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> To: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Marcel Holtmann <marcel-kz+m5ild9QBg9hUCZPvPmw@public.gmane.org>, Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>, Jiri Slaby <jslaby-IBi9RG/b67k@public.gmane.org> Cc: "Ville Tervo" <ville.tervo-X3B1VOXEql0@public.gmane.org>, "Filip Matijević" <filip.matijevic.pz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, "Aaro Koskinen" <aaro.koskinen-X3B1VOXEql0@public.gmane.org>, "Pavel Machek" <pavel-+ZI9xUNit7I@public.gmane.org>, "Pali Rohár" <pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-bluetooth-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Subject: [RFC 7/7] ARM: dts: OMAP3-N950: Add bluetooth Date: Sat, 13 Aug 2016 05:14:38 +0200 [thread overview] Message-ID: <1471058078-5579-8-git-send-email-sre@kernel.org> (raw) In-Reply-To: <1471058078-5579-1-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> --- arch/arm/boot/dts/omap3-n950-n9.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 927b17fc4ed8..7c0c53e2f679 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -58,6 +58,13 @@ pinctrl-0 = <&debug_leds>; }; }; + + /* controlled (enabled/disabled) directly by wl1271 */ + vctcxo: vctcxo { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; }; &omap3_pmx_core { @@ -125,6 +132,16 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + >; + }; + }; &omap3_pmx_core2 { @@ -435,3 +452,20 @@ &ssi_port2 { status = "disabled"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "nokia,ti,wl1271-bluetooth"; + + reset-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; /* 26 */ + host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ + bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ + + clocks = <&vctcxo>; + clock-names = "sysclk"; + }; + +}; -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-13 3:15 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-08-13 3:14 [RFC 0/7] Nokia N9xx bluetooth driver Sebastian Reichel 2016-08-13 3:14 ` [RFC 1/7] tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init Sebastian Reichel 2016-08-14 8:49 ` Pavel Machek 2016-08-16 8:14 ` Sebastian Reichel 2016-08-16 8:14 ` Sebastian Reichel 2016-08-13 3:14 ` [RFC 2/7] tty: add support for "tty slave" devices Sebastian Reichel 2016-08-13 10:03 ` Greg Kroah-Hartman 2016-08-13 20:31 ` Sebastian Reichel 2016-08-14 11:36 ` Greg Kroah-Hartman 2016-08-14 8:48 ` Pavel Machek 2016-08-14 11:35 ` Greg Kroah-Hartman 2016-08-14 11:35 ` Greg Kroah-Hartman 2016-08-13 3:14 ` [RFC 3/7] dt: bindings: Add nokia-bluetooth Sebastian Reichel 2016-08-16 13:51 ` Rob Herring 2016-08-16 23:28 ` Sebastian Reichel 2016-08-17 13:11 ` Rob Herring 2016-08-17 13:11 ` Rob Herring 2016-08-17 15:54 ` Pavel Machek 2016-08-17 15:54 ` Pavel Machek 2016-08-13 3:14 ` [RFC 4/7] Bluetooth: hci_uart: Add support for word alignment Sebastian Reichel 2016-08-14 8:51 ` Pavel Machek 2016-08-14 8:51 ` Pavel Machek 2016-08-16 7:05 ` Marcel Holtmann 2016-08-16 7:51 ` Sebastian Reichel 2016-08-16 7:51 ` Sebastian Reichel 2016-08-13 3:14 ` [RFC 5/7] Bluetooth: hci_nokia: Introduce new driver Sebastian Reichel 2016-08-14 23:54 ` Paul Gortmaker 2016-08-14 23:54 ` Paul Gortmaker 2016-08-15 1:12 ` Sebastian Reichel 2016-08-15 1:12 ` Sebastian Reichel 2016-08-16 7:02 ` Marcel Holtmann 2016-08-16 7:52 ` Pali Rohár 2016-08-16 9:25 ` Sebastian Reichel 2016-08-16 9:09 ` Sebastian Reichel 2016-08-16 9:09 ` Sebastian Reichel 2016-08-16 10:23 ` Marcel Holtmann 2016-08-16 10:23 ` Marcel Holtmann 2016-08-16 20:05 ` Pavel Machek 2016-08-16 10:23 ` Marcel Holtmann 2016-08-16 10:23 ` Marcel Holtmann 2016-08-16 8:10 ` Marcel Holtmann 2016-08-16 8:10 ` Marcel Holtmann 2016-08-16 9:35 ` Sebastian Reichel 2016-08-13 3:14 ` [RFC 6/7] ARM: dts: OMAP3-N900: Add bluetooth Sebastian Reichel 2016-08-14 8:53 ` Pavel Machek 2016-08-13 3:14 ` Sebastian Reichel [this message] 2016-08-13 3:14 ` [RFC 7/7] ARM: dts: OMAP3-N950: " Sebastian Reichel 2016-08-14 8:53 ` Pavel Machek 2016-08-16 7:10 ` [RFC 0/7] Nokia N9xx bluetooth driver Marcel Holtmann 2016-08-16 7:10 ` Marcel Holtmann 2016-08-16 20:22 ` Rob Herring 2016-08-16 20:22 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1471058078-5579-8-git-send-email-sre@kernel.org \ --to=sre@kernel.org \ --cc=aaro.koskinen@iki.fi \ --cc=devicetree@vger.kernel.org \ --cc=filip.matijevic.pz@gmail.com \ --cc=gregkh@linuxfoundation.org \ --cc=ivo.g.dimitrov.75@gmail.com \ --cc=jslaby@suse.com \ --cc=linux-bluetooth@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=marcel@holtmann.org \ --cc=mark.rutland@arm.com \ --cc=pali.rohar@gmail.com \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ --cc=tony@atomide.com \ --cc=ville.tervo@iki.fi \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.