From: Beniamino Galvani <b.galvani@gmail.com> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Date: Tue, 16 Aug 2016 11:49:48 +0200 [thread overview] Message-ID: <1471340990-16247-3-git-send-email-b.galvani@gmail.com> (raw) In-Reply-To: <1471340990-16247-1-git-send-email-b.galvani@gmail.com> Import DTS files and dt-bindings includes from Linux 4.8-rc1. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- arch/arm/dts/meson-gxbb-odroidc2.dts | 19 ++ arch/arm/dts/meson-gxbb.dtsi | 170 ++++++++++++++++- include/dt-bindings/gpio/meson-gxbb-gpio.h | 154 +++++++++++++++ .../dt-bindings/reset/amlogic,meson-gxbb-reset.h | 210 +++++++++++++++++++++ 4 files changed, 552 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/gpio/meson-gxbb-gpio.h create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index 653c2fa..79bee64 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "meson-gxbb.dtsi" +#include <dt-bindings/gpio/gpio.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; @@ -62,8 +63,26 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + leds { + compatible = "gpio-leds"; + blue { + label = "c2:blue:alive"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index 832815d..e502c24 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -43,6 +43,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/meson-gxbb-gpio.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> / { compatible = "amlogic,meson-gxbb"; @@ -129,13 +131,35 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + reset: reset-controller at 4404 { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + uart_A: serial at 84c0 { compatible = "amlogic,meson-uart"; - reg = <0x0 0x084c0 0x0 0x14>; + reg = <0x0 0x84c0 0x0 0x14>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; status = "disabled"; }; + + uart_B: serial at 84dc { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84dc 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_C: serial at 8700 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x8700 0x0 0x14>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; }; gic: interrupt-controller at c4301000 { @@ -158,6 +182,29 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + pinctrl_aobus: pinctrl at 14 { + compatible = "amlogic,meson-gxbb-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank at 14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + }; + uart_AO: serial at 4c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; @@ -167,6 +214,115 @@ }; }; + periphs: periphs at c8834000 { + compatible = "simple-bus"; + reg = <0x0 0xc8834000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + + rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x0 0x0 0x4>; + }; + + pinctrl_periphs: pinctrl at 4b0 { + compatible = "amlogic,meson-gxbb-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank at 4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk"; + function = "emmc"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + eth_pins: eth_c { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + }; + }; + + hiubus: hiubus at c883c000 { + compatible = "simple-bus"; + reg = <0x0 0xc883c000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + + clkc: clock-controller at 0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; + }; + apb: apb at d0000000 { compatible = "simple-bus"; reg = <0x0 0xd0000000 0x0 0x200000>; @@ -174,5 +330,17 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; }; + + ethmac: ethernet at c9410000 { + compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&xtal>; + clock-names = "stmmaceth"; + phy-mode = "rgmii"; + status = "disabled"; + }; }; }; diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h new file mode 100644 index 0000000..58654fd --- /dev/null +++ b/include/dt-bindings/gpio/meson-gxbb-gpio.h @@ -0,0 +1,154 @@ +/* + * GPIO definitions for Amlogic Meson GXBB SoCs + * + * Copyright (C) 2016 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H +#define _DT_BINDINGS_MESON_GXBB_GPIO_H + +#define GPIOAO_0 0 +#define GPIOAO_1 1 +#define GPIOAO_2 2 +#define GPIOAO_3 3 +#define GPIOAO_4 4 +#define GPIOAO_5 5 +#define GPIOAO_6 6 +#define GPIOAO_7 7 +#define GPIOAO_8 8 +#define GPIOAO_9 9 +#define GPIOAO_10 10 +#define GPIOAO_11 11 +#define GPIOAO_12 12 +#define GPIOAO_13 13 + +#define GPIOZ_0 0 +#define GPIOZ_1 1 +#define GPIOZ_2 2 +#define GPIOZ_3 3 +#define GPIOZ_4 4 +#define GPIOZ_5 5 +#define GPIOZ_6 6 +#define GPIOZ_7 7 +#define GPIOZ_8 8 +#define GPIOZ_9 9 +#define GPIOZ_10 10 +#define GPIOZ_11 11 +#define GPIOZ_12 12 +#define GPIOZ_13 13 +#define GPIOZ_14 14 +#define GPIOZ_15 15 +#define GPIOH_0 16 +#define GPIOH_1 17 +#define GPIOH_2 18 +#define GPIOH_3 19 +#define BOOT_0 20 +#define BOOT_1 21 +#define BOOT_2 22 +#define BOOT_3 23 +#define BOOT_4 24 +#define BOOT_5 25 +#define BOOT_6 26 +#define BOOT_7 27 +#define BOOT_8 28 +#define BOOT_9 29 +#define BOOT_10 30 +#define BOOT_11 31 +#define BOOT_12 32 +#define BOOT_13 33 +#define BOOT_14 34 +#define BOOT_15 35 +#define BOOT_16 36 +#define BOOT_17 37 +#define CARD_0 38 +#define CARD_1 39 +#define CARD_2 40 +#define CARD_3 41 +#define CARD_4 42 +#define CARD_5 43 +#define CARD_6 44 +#define GPIODV_0 45 +#define GPIODV_1 46 +#define GPIODV_2 47 +#define GPIODV_3 48 +#define GPIODV_4 49 +#define GPIODV_5 50 +#define GPIODV_6 51 +#define GPIODV_7 52 +#define GPIODV_8 53 +#define GPIODV_9 54 +#define GPIODV_10 55 +#define GPIODV_11 56 +#define GPIODV_12 57 +#define GPIODV_13 58 +#define GPIODV_14 59 +#define GPIODV_15 60 +#define GPIODV_16 61 +#define GPIODV_17 62 +#define GPIODV_18 63 +#define GPIODV_19 64 +#define GPIODV_20 65 +#define GPIODV_21 66 +#define GPIODV_22 67 +#define GPIODV_23 68 +#define GPIODV_24 69 +#define GPIODV_25 70 +#define GPIODV_26 71 +#define GPIODV_27 72 +#define GPIODV_28 73 +#define GPIODV_29 74 +#define GPIOY_0 75 +#define GPIOY_1 76 +#define GPIOY_2 77 +#define GPIOY_3 78 +#define GPIOY_4 79 +#define GPIOY_5 80 +#define GPIOY_6 81 +#define GPIOY_7 82 +#define GPIOY_8 83 +#define GPIOY_9 84 +#define GPIOY_10 85 +#define GPIOY_11 86 +#define GPIOY_12 87 +#define GPIOY_13 88 +#define GPIOY_14 89 +#define GPIOY_15 90 +#define GPIOY_16 91 +#define GPIOX_0 92 +#define GPIOX_1 93 +#define GPIOX_2 94 +#define GPIOX_3 95 +#define GPIOX_4 96 +#define GPIOX_5 97 +#define GPIOX_6 98 +#define GPIOX_7 99 +#define GPIOX_8 100 +#define GPIOX_9 101 +#define GPIOX_10 102 +#define GPIOX_11 103 +#define GPIOX_12 104 +#define GPIOX_13 105 +#define GPIOX_14 106 +#define GPIOX_15 107 +#define GPIOX_16 108 +#define GPIOX_17 109 +#define GPIOX_18 110 +#define GPIOX_19 111 +#define GPIOX_20 112 +#define GPIOX_21 113 +#define GPIOX_22 114 +#define GPIOCLK_0 115 +#define GPIOCLK_1 116 +#define GPIOCLK_2 117 +#define GPIOCLK_3 118 +#define GPIO_TEST_N 119 + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h new file mode 100644 index 0000000..524d607 --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -0,0 +1,210 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS_RESET 2 +#define RESET_DDR_TOP 3 +#define RESET_DCU_RESET 4 +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_VID_PLL_DIV 7 +/* 8 */ +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +#define RESET_NAND_CAPB3 18 +#define RESET_HDMITX_CAPB3 19 +#define RESET_MALI_CAPB3 20 +#define RESET_DOS_CAPB3 21 +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +#define RESET_MIPI_0 28 +#define RESET_MIPI_1 29 +#define RESET_MIPI_2 30 +#define RESET_MIPI_3 31 +/* RESET1 */ +#define RESET_CPPM 32 +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61 */ +/* 62 */ +/* 63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_HDMI_TX 66 +/* 67 */ +/* 68 */ +/* 69 */ +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75 */ +/* 76 */ +#define RESET_AO_CPU_RESET 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_TVFE 101 +#define RESET_AHB_BRIDGE_CNTL 102 +/* 103 */ +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +/* 130 */ +/* 131 */ +#define RESET_DVIN_RESET 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +#define RESET_RTC 138 +/* 139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_SANA 197 +/* 198 */ +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1_2 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SDHC 206 +#define RESET_UART_SLIP 207 +/* 208-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +/* 233-255 */ + +#endif -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: b.galvani@gmail.com (Beniamino Galvani) To: linus-amlogic@lists.infradead.org Subject: [PATCH 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Date: Tue, 16 Aug 2016 11:49:48 +0200 [thread overview] Message-ID: <1471340990-16247-3-git-send-email-b.galvani@gmail.com> (raw) In-Reply-To: <1471340990-16247-1-git-send-email-b.galvani@gmail.com> Import DTS files and dt-bindings includes from Linux 4.8-rc1. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- arch/arm/dts/meson-gxbb-odroidc2.dts | 19 ++ arch/arm/dts/meson-gxbb.dtsi | 170 ++++++++++++++++- include/dt-bindings/gpio/meson-gxbb-gpio.h | 154 +++++++++++++++ .../dt-bindings/reset/amlogic,meson-gxbb-reset.h | 210 +++++++++++++++++++++ 4 files changed, 552 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/gpio/meson-gxbb-gpio.h create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index 653c2fa..79bee64 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "meson-gxbb.dtsi" +#include <dt-bindings/gpio/gpio.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; @@ -62,8 +63,26 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + leds { + compatible = "gpio-leds"; + blue { + label = "c2:blue:alive"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index 832815d..e502c24 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -43,6 +43,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/meson-gxbb-gpio.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> / { compatible = "amlogic,meson-gxbb"; @@ -129,13 +131,35 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + reset: reset-controller at 4404 { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + uart_A: serial at 84c0 { compatible = "amlogic,meson-uart"; - reg = <0x0 0x084c0 0x0 0x14>; + reg = <0x0 0x84c0 0x0 0x14>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; status = "disabled"; }; + + uart_B: serial at 84dc { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84dc 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_C: serial at 8700 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x8700 0x0 0x14>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; }; gic: interrupt-controller at c4301000 { @@ -158,6 +182,29 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + pinctrl_aobus: pinctrl at 14 { + compatible = "amlogic,meson-gxbb-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank at 14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + }; + uart_AO: serial at 4c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; @@ -167,6 +214,115 @@ }; }; + periphs: periphs at c8834000 { + compatible = "simple-bus"; + reg = <0x0 0xc8834000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + + rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x0 0x0 0x4>; + }; + + pinctrl_periphs: pinctrl at 4b0 { + compatible = "amlogic,meson-gxbb-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank at 4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk"; + function = "emmc"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + eth_pins: eth_c { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + }; + }; + + hiubus: hiubus at c883c000 { + compatible = "simple-bus"; + reg = <0x0 0xc883c000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + + clkc: clock-controller at 0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; + }; + apb: apb at d0000000 { compatible = "simple-bus"; reg = <0x0 0xd0000000 0x0 0x200000>; @@ -174,5 +330,17 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; }; + + ethmac: ethernet at c9410000 { + compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&xtal>; + clock-names = "stmmaceth"; + phy-mode = "rgmii"; + status = "disabled"; + }; }; }; diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h new file mode 100644 index 0000000..58654fd --- /dev/null +++ b/include/dt-bindings/gpio/meson-gxbb-gpio.h @@ -0,0 +1,154 @@ +/* + * GPIO definitions for Amlogic Meson GXBB SoCs + * + * Copyright (C) 2016 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H +#define _DT_BINDINGS_MESON_GXBB_GPIO_H + +#define GPIOAO_0 0 +#define GPIOAO_1 1 +#define GPIOAO_2 2 +#define GPIOAO_3 3 +#define GPIOAO_4 4 +#define GPIOAO_5 5 +#define GPIOAO_6 6 +#define GPIOAO_7 7 +#define GPIOAO_8 8 +#define GPIOAO_9 9 +#define GPIOAO_10 10 +#define GPIOAO_11 11 +#define GPIOAO_12 12 +#define GPIOAO_13 13 + +#define GPIOZ_0 0 +#define GPIOZ_1 1 +#define GPIOZ_2 2 +#define GPIOZ_3 3 +#define GPIOZ_4 4 +#define GPIOZ_5 5 +#define GPIOZ_6 6 +#define GPIOZ_7 7 +#define GPIOZ_8 8 +#define GPIOZ_9 9 +#define GPIOZ_10 10 +#define GPIOZ_11 11 +#define GPIOZ_12 12 +#define GPIOZ_13 13 +#define GPIOZ_14 14 +#define GPIOZ_15 15 +#define GPIOH_0 16 +#define GPIOH_1 17 +#define GPIOH_2 18 +#define GPIOH_3 19 +#define BOOT_0 20 +#define BOOT_1 21 +#define BOOT_2 22 +#define BOOT_3 23 +#define BOOT_4 24 +#define BOOT_5 25 +#define BOOT_6 26 +#define BOOT_7 27 +#define BOOT_8 28 +#define BOOT_9 29 +#define BOOT_10 30 +#define BOOT_11 31 +#define BOOT_12 32 +#define BOOT_13 33 +#define BOOT_14 34 +#define BOOT_15 35 +#define BOOT_16 36 +#define BOOT_17 37 +#define CARD_0 38 +#define CARD_1 39 +#define CARD_2 40 +#define CARD_3 41 +#define CARD_4 42 +#define CARD_5 43 +#define CARD_6 44 +#define GPIODV_0 45 +#define GPIODV_1 46 +#define GPIODV_2 47 +#define GPIODV_3 48 +#define GPIODV_4 49 +#define GPIODV_5 50 +#define GPIODV_6 51 +#define GPIODV_7 52 +#define GPIODV_8 53 +#define GPIODV_9 54 +#define GPIODV_10 55 +#define GPIODV_11 56 +#define GPIODV_12 57 +#define GPIODV_13 58 +#define GPIODV_14 59 +#define GPIODV_15 60 +#define GPIODV_16 61 +#define GPIODV_17 62 +#define GPIODV_18 63 +#define GPIODV_19 64 +#define GPIODV_20 65 +#define GPIODV_21 66 +#define GPIODV_22 67 +#define GPIODV_23 68 +#define GPIODV_24 69 +#define GPIODV_25 70 +#define GPIODV_26 71 +#define GPIODV_27 72 +#define GPIODV_28 73 +#define GPIODV_29 74 +#define GPIOY_0 75 +#define GPIOY_1 76 +#define GPIOY_2 77 +#define GPIOY_3 78 +#define GPIOY_4 79 +#define GPIOY_5 80 +#define GPIOY_6 81 +#define GPIOY_7 82 +#define GPIOY_8 83 +#define GPIOY_9 84 +#define GPIOY_10 85 +#define GPIOY_11 86 +#define GPIOY_12 87 +#define GPIOY_13 88 +#define GPIOY_14 89 +#define GPIOY_15 90 +#define GPIOY_16 91 +#define GPIOX_0 92 +#define GPIOX_1 93 +#define GPIOX_2 94 +#define GPIOX_3 95 +#define GPIOX_4 96 +#define GPIOX_5 97 +#define GPIOX_6 98 +#define GPIOX_7 99 +#define GPIOX_8 100 +#define GPIOX_9 101 +#define GPIOX_10 102 +#define GPIOX_11 103 +#define GPIOX_12 104 +#define GPIOX_13 105 +#define GPIOX_14 106 +#define GPIOX_15 107 +#define GPIOX_16 108 +#define GPIOX_17 109 +#define GPIOX_18 110 +#define GPIOX_19 111 +#define GPIOX_20 112 +#define GPIOX_21 113 +#define GPIOX_22 114 +#define GPIOCLK_0 115 +#define GPIOCLK_1 116 +#define GPIOCLK_2 117 +#define GPIOCLK_3 118 +#define GPIO_TEST_N 119 + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h new file mode 100644 index 0000000..524d607 --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -0,0 +1,210 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS_RESET 2 +#define RESET_DDR_TOP 3 +#define RESET_DCU_RESET 4 +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_VID_PLL_DIV 7 +/* 8 */ +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +#define RESET_NAND_CAPB3 18 +#define RESET_HDMITX_CAPB3 19 +#define RESET_MALI_CAPB3 20 +#define RESET_DOS_CAPB3 21 +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +#define RESET_MIPI_0 28 +#define RESET_MIPI_1 29 +#define RESET_MIPI_2 30 +#define RESET_MIPI_3 31 +/* RESET1 */ +#define RESET_CPPM 32 +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61 */ +/* 62 */ +/* 63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_HDMI_TX 66 +/* 67 */ +/* 68 */ +/* 69 */ +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75 */ +/* 76 */ +#define RESET_AO_CPU_RESET 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_TVFE 101 +#define RESET_AHB_BRIDGE_CNTL 102 +/* 103 */ +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +/* 130 */ +/* 131 */ +#define RESET_DVIN_RESET 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +#define RESET_RTC 138 +/* 139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_SANA 197 +/* 198 */ +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1_2 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SDHC 206 +#define RESET_UART_SLIP 207 +/* 208-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +/* 233-255 */ + +#endif -- 2.7.4
next prev parent reply other threads:[~2016-08-16 9:49 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-08-16 9:49 [U-Boot] [PATCH 0/4] Amlogic Meson pinctrl driver for u-boot Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-16 9:49 ` [U-Boot] [PATCH 1/4] pinctrl: generic: scan for "pins" and "groups" properties in sub-nodes Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-08-19 9:19 ` [U-Boot] " Masahiro Yamada 2016-08-19 9:19 ` Masahiro Yamada 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` Tom Rini 2016-08-16 9:49 ` Beniamino Galvani [this message] 2016-08-16 9:49 ` [PATCH 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` [U-Boot,2/4] " Tom Rini 2016-08-16 9:49 ` [U-Boot] [PATCH 3/4] pinctrl: add driver for meson-gxbb pin controller Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` [U-Boot,3/4] " Tom Rini 2016-09-07 17:57 ` [U-Boot] [U-Boot, 3/4] " Tom Rini 2016-09-07 17:57 ` [U-Boot,3/4] " Tom Rini 2016-08-16 9:49 ` [U-Boot] [PATCH 4/4] meson: odroid-c2: enable Ethernet support through the device tree Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` Tom Rini
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1471340990-16247-3-git-send-email-b.galvani@gmail.com \ --to=b.galvani@gmail.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.