From: Beniamino Galvani <b.galvani@gmail.com> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH 4/4] meson: odroid-c2: enable Ethernet support through the device tree Date: Tue, 16 Aug 2016 11:49:50 +0200 [thread overview] Message-ID: <1471340990-16247-5-git-send-email-b.galvani@gmail.com> (raw) In-Reply-To: <1471340990-16247-1-git-send-email-b.galvani@gmail.com> Remove the device definition from board file, update the driver with the new compatible property and update config with necessary options. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- arch/arm/include/asm/arch-meson/gxbb.h | 3 --- board/amlogic/odroid-c2/odroid-c2.c | 13 ------------- configs/odroid-c2_defconfig | 3 +++ drivers/net/designware.c | 1 + 4 files changed, 4 insertions(+), 16 deletions(-) diff --git a/arch/arm/include/asm/arch-meson/gxbb.h b/arch/arm/include/asm/arch-meson/gxbb.h index f90f632..ce41349 100644 --- a/arch/arm/include/asm/arch-meson/gxbb.h +++ b/arch/arm/include/asm/arch-meson/gxbb.h @@ -20,9 +20,6 @@ #define GXBB_GPIO_IN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1) #define GXBB_GPIO_OUT(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2) -/* Pinmux registers 0 to 12 */ -#define GXBB_PINMUX(n) GXBB_PERIPHS_ADDR(0x2c + (n)) - #define GXBB_ETH_REG_0 GXBB_PERIPHS_ADDR(0x50) #define GXBB_ETH_REG_1 GXBB_PERIPHS_ADDR(0x51) diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index bd72100..b61daaa 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -21,24 +21,11 @@ int board_init(void) return 0; } -static const struct eth_pdata gxbb_eth_pdata = { - .iobase = GXBB_ETH_BASE, - .phy_interface = PHY_INTERFACE_MODE_RGMII, -}; - -U_BOOT_DEVICE(meson_eth) = { - .name = "eth_designware", - .platdata = &gxbb_eth_pdata, -}; - int misc_init_r(void) { u8 mac_addr[EFUSE_MAC_SIZE]; ssize_t len; - /* Select Ethernet function */ - setbits_le32(GXBB_PINMUX(6), 0x3fff); - /* Set RGMII mode */ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | GXBB_ETH_REG_0_TX_PHASE(1) | diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 808bbc2..3e9ef68 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -14,6 +14,9 @@ CONFIG_HUSH_PARSER=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_GXBB=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_MESON=y CONFIG_DEBUG_UART_BASE=0xc81004c0 diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 8ba72e3..9e6d726 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -737,6 +737,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev) static const struct udevice_id designware_eth_ids[] = { { .compatible = "allwinner,sun7i-a20-gmac" }, { .compatible = "altr,socfpga-stmmac" }, + { .compatible = "amlogic,meson6-dwmac" }, { } }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: b.galvani@gmail.com (Beniamino Galvani) To: linus-amlogic@lists.infradead.org Subject: [PATCH 4/4] meson: odroid-c2: enable Ethernet support through the device tree Date: Tue, 16 Aug 2016 11:49:50 +0200 [thread overview] Message-ID: <1471340990-16247-5-git-send-email-b.galvani@gmail.com> (raw) In-Reply-To: <1471340990-16247-1-git-send-email-b.galvani@gmail.com> Remove the device definition from board file, update the driver with the new compatible property and update config with necessary options. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- arch/arm/include/asm/arch-meson/gxbb.h | 3 --- board/amlogic/odroid-c2/odroid-c2.c | 13 ------------- configs/odroid-c2_defconfig | 3 +++ drivers/net/designware.c | 1 + 4 files changed, 4 insertions(+), 16 deletions(-) diff --git a/arch/arm/include/asm/arch-meson/gxbb.h b/arch/arm/include/asm/arch-meson/gxbb.h index f90f632..ce41349 100644 --- a/arch/arm/include/asm/arch-meson/gxbb.h +++ b/arch/arm/include/asm/arch-meson/gxbb.h @@ -20,9 +20,6 @@ #define GXBB_GPIO_IN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1) #define GXBB_GPIO_OUT(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2) -/* Pinmux registers 0 to 12 */ -#define GXBB_PINMUX(n) GXBB_PERIPHS_ADDR(0x2c + (n)) - #define GXBB_ETH_REG_0 GXBB_PERIPHS_ADDR(0x50) #define GXBB_ETH_REG_1 GXBB_PERIPHS_ADDR(0x51) diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index bd72100..b61daaa 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -21,24 +21,11 @@ int board_init(void) return 0; } -static const struct eth_pdata gxbb_eth_pdata = { - .iobase = GXBB_ETH_BASE, - .phy_interface = PHY_INTERFACE_MODE_RGMII, -}; - -U_BOOT_DEVICE(meson_eth) = { - .name = "eth_designware", - .platdata = &gxbb_eth_pdata, -}; - int misc_init_r(void) { u8 mac_addr[EFUSE_MAC_SIZE]; ssize_t len; - /* Select Ethernet function */ - setbits_le32(GXBB_PINMUX(6), 0x3fff); - /* Set RGMII mode */ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | GXBB_ETH_REG_0_TX_PHASE(1) | diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 808bbc2..3e9ef68 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -14,6 +14,9 @@ CONFIG_HUSH_PARSER=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_GXBB=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_MESON=y CONFIG_DEBUG_UART_BASE=0xc81004c0 diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 8ba72e3..9e6d726 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -737,6 +737,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev) static const struct udevice_id designware_eth_ids[] = { { .compatible = "allwinner,sun7i-a20-gmac" }, { .compatible = "altr,socfpga-stmmac" }, + { .compatible = "amlogic,meson6-dwmac" }, { } }; -- 2.7.4
next prev parent reply other threads:[~2016-08-16 9:49 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-08-16 9:49 [U-Boot] [PATCH 0/4] Amlogic Meson pinctrl driver for u-boot Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-16 9:49 ` [U-Boot] [PATCH 1/4] pinctrl: generic: scan for "pins" and "groups" properties in sub-nodes Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-08-19 9:19 ` [U-Boot] " Masahiro Yamada 2016-08-19 9:19 ` Masahiro Yamada 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` Tom Rini 2016-08-16 9:49 ` [U-Boot] [PATCH 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` [U-Boot,2/4] " Tom Rini 2016-08-16 9:49 ` [U-Boot] [PATCH 3/4] pinctrl: add driver for meson-gxbb pin controller Beniamino Galvani 2016-08-16 9:49 ` Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` [U-Boot,3/4] " Tom Rini 2016-09-07 17:57 ` [U-Boot] [U-Boot, 3/4] " Tom Rini 2016-09-07 17:57 ` [U-Boot,3/4] " Tom Rini 2016-08-16 9:49 ` Beniamino Galvani [this message] 2016-08-16 9:49 ` [PATCH 4/4] meson: odroid-c2: enable Ethernet support through the device tree Beniamino Galvani 2016-08-18 3:44 ` [U-Boot] " Simon Glass 2016-08-18 3:44 ` Simon Glass 2016-09-07 17:57 ` [U-Boot] [U-Boot, " Tom Rini 2016-09-07 17:57 ` Tom Rini
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1471340990-16247-5-git-send-email-b.galvani@gmail.com \ --to=b.galvani@gmail.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.