From: Neil Armstrong <narmstrong@baylibre.com>
To: linus.walleij@linaro.org, khilman@baylibre.com, carlo@caione.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: [PATCH 1/2] ARM64: dts: amlogic: gxbb: pinctrl: add pins for PWM
Date: Mon, 22 Aug 2016 14:54:09 +0200 [thread overview]
Message-ID: <1471870450-11109-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1471870450-11109-1-git-send-email-narmstrong@baylibre.com>
Add support for PWM pins, for EE and AO domains.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 ++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index cb4d6ad..2227507 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -193,6 +193,14 @@ static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) };
static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) };
static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) };
+static const unsigned int pwm_a_x_pins[] = { PIN(GPIOX_6, EE_OFF) };
+static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, EE_OFF) };
+static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) };
+static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) };
+static const unsigned int pwm_e_pins[] = { PIN(GPIOX_19, EE_OFF) };
+static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) };
+static const unsigned int pwm_f_y_pins[] = { PIN(GPIOY_15, EE_OFF) };
+
static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
MESON_PIN(GPIOAO_0, 0),
MESON_PIN(GPIOAO_1, 0),
@@ -225,6 +233,11 @@ static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) };
+static const unsigned int pwm_ao_a_6_pins[] = { PIN(GPIOAO_6, 0) };
+static const unsigned int pwm_ao_a_12_pins[] = { PIN(GPIOAO_12, 0) };
+static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_13, 0) };
+
static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIOZ_0, EE_OFF),
GPIO_GROUP(GPIOZ_1, EE_OFF),
@@ -359,12 +372,17 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11),
GROUP(uart_rts_a, 4, 10),
+ GROUP(pwm_a_x, 3, 17),
+ GROUP(pwm_e, 2, 30),
+ GROUP(pwm_f_x, 3, 18),
/* Bank Y */
GROUP(uart_cts_c, 1, 19),
GROUP(uart_rts_c, 1, 18),
GROUP(uart_tx_c, 1, 17),
GROUP(uart_rx_c, 1, 16),
+ GROUP(pwm_a_y, 1, 20),
+ GROUP(pwm_f_y, 1, 21),
/* Bank Z */
GROUP(eth_mdio, 6, 1),
@@ -387,6 +405,8 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(uart_rx_b, 2, 28),
GROUP(uart_cts_b, 2, 27),
GROUP(uart_rts_b, 2, 26),
+ GROUP(pwm_b, 3, 21),
+ GROUP(pwm_d, 3, 20),
/* Bank BOOT */
GROUP(emmc_nand_d07, 4, 30),
@@ -432,6 +452,10 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
GROUP(i2c_sda_ao, 0, 5),
GROUP(i2c_slave_sck_ao, 0, 2),
GROUP(i2c_slave_sda_ao, 0, 1),
+ GROUP(pwm_ao_a_3, 0, 22),
+ GROUP(pwm_ao_a_6, 0, 18),
+ GROUP(pwm_ao_a_12, 0, 17),
+ GROUP(pwm_ao_b, 0, 3),
};
static const char * const gpio_periphs_groups[] = {
@@ -499,6 +523,34 @@ static const char * const eth_groups[] = {
"eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
};
+static const char * const pwm_a_x_groups[] = {
+ "pwm_a_x",
+};
+
+static const char * const pwm_a_y_groups[] = {
+ "pwm_a_y",
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b",
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d",
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e",
+};
+
+static const char * const pwm_f_x_groups[] = {
+ "pwm_f_x",
+};
+
+static const char * const pwm_f_y_groups[] = {
+ "pwm_f_y",
+};
+
static const char * const gpio_aobus_groups[] = {
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -521,6 +573,22 @@ static const char * const i2c_slave_ao_groups[] = {
"i2c_slave_sdk_ao", "i2c_slave_sda_ao",
};
+static const char * const pwm_ao_a_3_groups[] = {
+ "pwm_ao_a_3",
+};
+
+static const char * const pwm_ao_a_6_groups[] = {
+ "pwm_ao_a_6",
+};
+
+static const char * const pwm_ao_a_12_groups[] = {
+ "pwm_ao_a_12",
+};
+
+static const char * const pwm_ao_b_groups[] = {
+ "pwm_ao_b",
+};
+
static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
@@ -529,6 +597,13 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(uart_b),
FUNCTION(uart_c),
FUNCTION(eth),
+ FUNCTION(pwm_a_x),
+ FUNCTION(pwm_a_y),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f_x),
+ FUNCTION(pwm_f_y),
};
static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
@@ -537,6 +612,10 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
FUNCTION(uart_ao_b),
FUNCTION(i2c_ao),
FUNCTION(i2c_slave_ao),
+ FUNCTION(pwm_ao_a_3),
+ FUNCTION(pwm_ao_a_6),
+ FUNCTION(pwm_ao_a_12),
+ FUNCTION(pwm_ao_b),
};
static struct meson_bank meson_gxbb_periphs_banks[] = {
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM64: dts: amlogic: gxbb: pinctrl: add pins for PWM
Date: Mon, 22 Aug 2016 14:54:09 +0200 [thread overview]
Message-ID: <1471870450-11109-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1471870450-11109-1-git-send-email-narmstrong@baylibre.com>
Add support for PWM pins, for EE and AO domains.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 ++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index cb4d6ad..2227507 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -193,6 +193,14 @@ static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) };
static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) };
static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) };
+static const unsigned int pwm_a_x_pins[] = { PIN(GPIOX_6, EE_OFF) };
+static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, EE_OFF) };
+static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) };
+static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) };
+static const unsigned int pwm_e_pins[] = { PIN(GPIOX_19, EE_OFF) };
+static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) };
+static const unsigned int pwm_f_y_pins[] = { PIN(GPIOY_15, EE_OFF) };
+
static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
MESON_PIN(GPIOAO_0, 0),
MESON_PIN(GPIOAO_1, 0),
@@ -225,6 +233,11 @@ static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) };
+static const unsigned int pwm_ao_a_6_pins[] = { PIN(GPIOAO_6, 0) };
+static const unsigned int pwm_ao_a_12_pins[] = { PIN(GPIOAO_12, 0) };
+static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_13, 0) };
+
static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIOZ_0, EE_OFF),
GPIO_GROUP(GPIOZ_1, EE_OFF),
@@ -359,12 +372,17 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11),
GROUP(uart_rts_a, 4, 10),
+ GROUP(pwm_a_x, 3, 17),
+ GROUP(pwm_e, 2, 30),
+ GROUP(pwm_f_x, 3, 18),
/* Bank Y */
GROUP(uart_cts_c, 1, 19),
GROUP(uart_rts_c, 1, 18),
GROUP(uart_tx_c, 1, 17),
GROUP(uart_rx_c, 1, 16),
+ GROUP(pwm_a_y, 1, 20),
+ GROUP(pwm_f_y, 1, 21),
/* Bank Z */
GROUP(eth_mdio, 6, 1),
@@ -387,6 +405,8 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(uart_rx_b, 2, 28),
GROUP(uart_cts_b, 2, 27),
GROUP(uart_rts_b, 2, 26),
+ GROUP(pwm_b, 3, 21),
+ GROUP(pwm_d, 3, 20),
/* Bank BOOT */
GROUP(emmc_nand_d07, 4, 30),
@@ -432,6 +452,10 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
GROUP(i2c_sda_ao, 0, 5),
GROUP(i2c_slave_sck_ao, 0, 2),
GROUP(i2c_slave_sda_ao, 0, 1),
+ GROUP(pwm_ao_a_3, 0, 22),
+ GROUP(pwm_ao_a_6, 0, 18),
+ GROUP(pwm_ao_a_12, 0, 17),
+ GROUP(pwm_ao_b, 0, 3),
};
static const char * const gpio_periphs_groups[] = {
@@ -499,6 +523,34 @@ static const char * const eth_groups[] = {
"eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
};
+static const char * const pwm_a_x_groups[] = {
+ "pwm_a_x",
+};
+
+static const char * const pwm_a_y_groups[] = {
+ "pwm_a_y",
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b",
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d",
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e",
+};
+
+static const char * const pwm_f_x_groups[] = {
+ "pwm_f_x",
+};
+
+static const char * const pwm_f_y_groups[] = {
+ "pwm_f_y",
+};
+
static const char * const gpio_aobus_groups[] = {
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -521,6 +573,22 @@ static const char * const i2c_slave_ao_groups[] = {
"i2c_slave_sdk_ao", "i2c_slave_sda_ao",
};
+static const char * const pwm_ao_a_3_groups[] = {
+ "pwm_ao_a_3",
+};
+
+static const char * const pwm_ao_a_6_groups[] = {
+ "pwm_ao_a_6",
+};
+
+static const char * const pwm_ao_a_12_groups[] = {
+ "pwm_ao_a_12",
+};
+
+static const char * const pwm_ao_b_groups[] = {
+ "pwm_ao_b",
+};
+
static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
@@ -529,6 +597,13 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(uart_b),
FUNCTION(uart_c),
FUNCTION(eth),
+ FUNCTION(pwm_a_x),
+ FUNCTION(pwm_a_y),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f_x),
+ FUNCTION(pwm_f_y),
};
static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
@@ -537,6 +612,10 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
FUNCTION(uart_ao_b),
FUNCTION(i2c_ao),
FUNCTION(i2c_slave_ao),
+ FUNCTION(pwm_ao_a_3),
+ FUNCTION(pwm_ao_a_6),
+ FUNCTION(pwm_ao_a_12),
+ FUNCTION(pwm_ao_b),
};
static struct meson_bank meson_gxbb_periphs_banks[] = {
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 1/2] ARM64: dts: amlogic: gxbb: pinctrl: add pins for PWM
Date: Mon, 22 Aug 2016 14:54:09 +0200 [thread overview]
Message-ID: <1471870450-11109-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1471870450-11109-1-git-send-email-narmstrong@baylibre.com>
Add support for PWM pins, for EE and AO domains.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 79 ++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index cb4d6ad..2227507 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -193,6 +193,14 @@ static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) };
static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) };
static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) };
+static const unsigned int pwm_a_x_pins[] = { PIN(GPIOX_6, EE_OFF) };
+static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, EE_OFF) };
+static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) };
+static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) };
+static const unsigned int pwm_e_pins[] = { PIN(GPIOX_19, EE_OFF) };
+static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) };
+static const unsigned int pwm_f_y_pins[] = { PIN(GPIOY_15, EE_OFF) };
+
static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
MESON_PIN(GPIOAO_0, 0),
MESON_PIN(GPIOAO_1, 0),
@@ -225,6 +233,11 @@ static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) };
+static const unsigned int pwm_ao_a_6_pins[] = { PIN(GPIOAO_6, 0) };
+static const unsigned int pwm_ao_a_12_pins[] = { PIN(GPIOAO_12, 0) };
+static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_13, 0) };
+
static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIOZ_0, EE_OFF),
GPIO_GROUP(GPIOZ_1, EE_OFF),
@@ -359,12 +372,17 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11),
GROUP(uart_rts_a, 4, 10),
+ GROUP(pwm_a_x, 3, 17),
+ GROUP(pwm_e, 2, 30),
+ GROUP(pwm_f_x, 3, 18),
/* Bank Y */
GROUP(uart_cts_c, 1, 19),
GROUP(uart_rts_c, 1, 18),
GROUP(uart_tx_c, 1, 17),
GROUP(uart_rx_c, 1, 16),
+ GROUP(pwm_a_y, 1, 20),
+ GROUP(pwm_f_y, 1, 21),
/* Bank Z */
GROUP(eth_mdio, 6, 1),
@@ -387,6 +405,8 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(uart_rx_b, 2, 28),
GROUP(uart_cts_b, 2, 27),
GROUP(uart_rts_b, 2, 26),
+ GROUP(pwm_b, 3, 21),
+ GROUP(pwm_d, 3, 20),
/* Bank BOOT */
GROUP(emmc_nand_d07, 4, 30),
@@ -432,6 +452,10 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
GROUP(i2c_sda_ao, 0, 5),
GROUP(i2c_slave_sck_ao, 0, 2),
GROUP(i2c_slave_sda_ao, 0, 1),
+ GROUP(pwm_ao_a_3, 0, 22),
+ GROUP(pwm_ao_a_6, 0, 18),
+ GROUP(pwm_ao_a_12, 0, 17),
+ GROUP(pwm_ao_b, 0, 3),
};
static const char * const gpio_periphs_groups[] = {
@@ -499,6 +523,34 @@ static const char * const eth_groups[] = {
"eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
};
+static const char * const pwm_a_x_groups[] = {
+ "pwm_a_x",
+};
+
+static const char * const pwm_a_y_groups[] = {
+ "pwm_a_y",
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b",
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d",
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e",
+};
+
+static const char * const pwm_f_x_groups[] = {
+ "pwm_f_x",
+};
+
+static const char * const pwm_f_y_groups[] = {
+ "pwm_f_y",
+};
+
static const char * const gpio_aobus_groups[] = {
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -521,6 +573,22 @@ static const char * const i2c_slave_ao_groups[] = {
"i2c_slave_sdk_ao", "i2c_slave_sda_ao",
};
+static const char * const pwm_ao_a_3_groups[] = {
+ "pwm_ao_a_3",
+};
+
+static const char * const pwm_ao_a_6_groups[] = {
+ "pwm_ao_a_6",
+};
+
+static const char * const pwm_ao_a_12_groups[] = {
+ "pwm_ao_a_12",
+};
+
+static const char * const pwm_ao_b_groups[] = {
+ "pwm_ao_b",
+};
+
static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
@@ -529,6 +597,13 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(uart_b),
FUNCTION(uart_c),
FUNCTION(eth),
+ FUNCTION(pwm_a_x),
+ FUNCTION(pwm_a_y),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f_x),
+ FUNCTION(pwm_f_y),
};
static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
@@ -537,6 +612,10 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
FUNCTION(uart_ao_b),
FUNCTION(i2c_ao),
FUNCTION(i2c_slave_ao),
+ FUNCTION(pwm_ao_a_3),
+ FUNCTION(pwm_ao_a_6),
+ FUNCTION(pwm_ao_a_12),
+ FUNCTION(pwm_ao_b),
};
static struct meson_bank meson_gxbb_periphs_banks[] = {
--
1.9.1
next prev parent reply other threads:[~2016-08-22 12:54 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 12:54 [PATCH 0/2] pinctrl: meson-gxbb: Export pins for PWMs Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong [this message]
2016-08-22 12:54 ` [PATCH 1/2] ARM64: dts: amlogic: gxbb: pinctrl: add pins for PWM Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong
2016-08-22 14:02 ` Linus Walleij
2016-08-22 14:02 ` Linus Walleij
2016-08-22 14:02 ` Linus Walleij
2016-08-22 14:02 ` Linus Walleij
2016-08-22 14:04 ` Neil Armstrong
2016-08-22 14:04 ` Neil Armstrong
2016-08-22 14:04 ` Neil Armstrong
2016-08-22 14:04 ` Neil Armstrong
2016-08-22 14:10 ` Linus Walleij
2016-08-22 14:10 ` Linus Walleij
2016-08-22 14:10 ` Linus Walleij
2016-08-22 14:10 ` Linus Walleij
2016-08-22 14:11 ` Neil Armstrong
2016-08-22 14:11 ` Neil Armstrong
2016-08-22 14:11 ` Neil Armstrong
2016-08-22 14:11 ` Neil Armstrong
2016-08-22 14:28 ` Neil Armstrong
2016-08-22 14:28 ` Neil Armstrong
2016-08-22 14:28 ` Neil Armstrong
2016-08-22 14:28 ` Neil Armstrong
[not found] ` <1471870450-11109-1-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2016-08-22 12:54 ` [PATCH 2/2] ARM64: dts: meson-gxbb: Add PWM pinctrl nodes Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong
2016-08-22 12:54 ` Neil Armstrong
[not found] ` <1471870450-11109-3-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2016-08-22 14:03 ` Linus Walleij
2016-08-22 14:03 ` Linus Walleij
2016-08-22 14:03 ` Linus Walleij
2016-08-22 14:03 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471870450-11109-2-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=carlo@caione.org \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.