From: carlo@caione.org (Carlo Caione) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/6] nvmem: amlogic: Add Amlogic Meson EFUSE driver Date: Sat, 27 Aug 2016 15:43:46 +0200 [thread overview] Message-ID: <1472305428-16874-5-git-send-email-carlo@caione.org> (raw) In-Reply-To: <1472305428-16874-1-git-send-email-carlo@caione.org> From: Carlo Caione <carlo@endlessm.com> Add Amlogic EFUSE driver to access hardware data like ethernet address, serial number or IDs. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> --- drivers/nvmem/Kconfig | 10 +++++ drivers/nvmem/Makefile | 2 + drivers/nvmem/meson-efuse.c | 93 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 drivers/nvmem/meson-efuse.c diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index f550c45..ba140ea 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -101,4 +101,14 @@ config NVMEM_VF610_OCOTP This driver can also be build as a module. If so, the module will be called nvmem-vf610-ocotp. +config MESON_EFUSE + tristate "Amlogic eFuse Support" + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson SoCs. + + This driver can also be built as a module. If so, the module + will be called nvmem_meson_efuse. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 45ab1ae..8f942a0 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -22,3 +22,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o nvmem_sunxi_sid-y := sunxi_sid.o obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o nvmem-vf610-ocotp-y := vf610-ocotp.o +obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o +nvmem_meson_efuse-y := meson-efuse.o diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c new file mode 100644 index 0000000..f207c3b --- /dev/null +++ b/drivers/nvmem/meson-efuse.c @@ -0,0 +1,93 @@ +/* + * Amlogic eFuse Driver + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include <linux/firmware/meson/meson_sm.h> + +static int meson_efuse_read(void *context, unsigned int offset, + void *val, size_t bytes) +{ + u8 *buf = val; + int ret; + + ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset, + bytes, 0, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +static struct nvmem_config econfig = { + .name = "meson-efuse", + .owner = THIS_MODULE, + .stride = 1, + .word_size = 1, + .read_only = true, +}; + +static const struct of_device_id meson_efuse_match[] = { + { .compatible = "amlogic,meson-gxbb-efuse", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_efuse_match); + +static int meson_efuse_probe(struct platform_device *pdev) +{ + struct nvmem_device *nvmem; + unsigned int size; + + if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) + return -EINVAL; + + econfig.dev = &pdev->dev; + econfig.reg_read = meson_efuse_read; + econfig.size = size; + + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int meson_efuse_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static struct platform_driver meson_efuse_driver = { + .probe = meson_efuse_probe, + .remove = meson_efuse_remove, + .driver = { + .name = "meson-efuse", + .of_match_table = meson_efuse_match, + }, +}; + +module_platform_driver(meson_efuse_driver); + +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); +MODULE_DESCRIPTION("Amlogic Meson NVMEM driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: carlo@caione.org (Carlo Caione) To: linus-amlogic@lists.infradead.org Subject: [PATCH v3 4/6] nvmem: amlogic: Add Amlogic Meson EFUSE driver Date: Sat, 27 Aug 2016 15:43:46 +0200 [thread overview] Message-ID: <1472305428-16874-5-git-send-email-carlo@caione.org> (raw) In-Reply-To: <1472305428-16874-1-git-send-email-carlo@caione.org> From: Carlo Caione <carlo@endlessm.com> Add Amlogic EFUSE driver to access hardware data like ethernet address, serial number or IDs. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> --- drivers/nvmem/Kconfig | 10 +++++ drivers/nvmem/Makefile | 2 + drivers/nvmem/meson-efuse.c | 93 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 drivers/nvmem/meson-efuse.c diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index f550c45..ba140ea 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -101,4 +101,14 @@ config NVMEM_VF610_OCOTP This driver can also be build as a module. If so, the module will be called nvmem-vf610-ocotp. +config MESON_EFUSE + tristate "Amlogic eFuse Support" + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson SoCs. + + This driver can also be built as a module. If so, the module + will be called nvmem_meson_efuse. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 45ab1ae..8f942a0 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -22,3 +22,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o nvmem_sunxi_sid-y := sunxi_sid.o obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o nvmem-vf610-ocotp-y := vf610-ocotp.o +obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o +nvmem_meson_efuse-y := meson-efuse.o diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c new file mode 100644 index 0000000..f207c3b --- /dev/null +++ b/drivers/nvmem/meson-efuse.c @@ -0,0 +1,93 @@ +/* + * Amlogic eFuse Driver + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include <linux/firmware/meson/meson_sm.h> + +static int meson_efuse_read(void *context, unsigned int offset, + void *val, size_t bytes) +{ + u8 *buf = val; + int ret; + + ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset, + bytes, 0, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +static struct nvmem_config econfig = { + .name = "meson-efuse", + .owner = THIS_MODULE, + .stride = 1, + .word_size = 1, + .read_only = true, +}; + +static const struct of_device_id meson_efuse_match[] = { + { .compatible = "amlogic,meson-gxbb-efuse", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_efuse_match); + +static int meson_efuse_probe(struct platform_device *pdev) +{ + struct nvmem_device *nvmem; + unsigned int size; + + if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) + return -EINVAL; + + econfig.dev = &pdev->dev; + econfig.reg_read = meson_efuse_read; + econfig.size = size; + + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int meson_efuse_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static struct platform_driver meson_efuse_driver = { + .probe = meson_efuse_probe, + .remove = meson_efuse_remove, + .driver = { + .name = "meson-efuse", + .of_match_table = meson_efuse_match, + }, +}; + +module_platform_driver(meson_efuse_driver); + +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); +MODULE_DESCRIPTION("Amlogic Meson NVMEM driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4
next prev parent reply other threads:[~2016-08-27 13:43 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-08-27 13:43 [PATCH v3 0/6] Add Amlogic secure monitor and NVMEM drivers Carlo Caione 2016-08-27 13:43 ` Carlo Caione 2016-08-27 13:43 ` [PATCH v3 1/6] firmware: Amlogic: Add secure monitor driver Carlo Caione 2016-08-27 13:43 ` Carlo Caione 2016-08-27 13:43 ` [PATCH v3 2/6] documentation: Add secure monitor bindings documentation Carlo Caione 2016-08-27 13:43 ` Carlo Caione 2016-08-27 13:43 ` [PATCH v3 3/6] ARM64: dts: amlogic: gxbb: Enable secure monitor Carlo Caione 2016-08-27 13:43 ` Carlo Caione 2016-08-27 13:43 ` Carlo Caione [this message] 2016-08-27 13:43 ` [PATCH v3 4/6] nvmem: amlogic: Add Amlogic Meson EFUSE driver Carlo Caione 2016-08-27 13:43 ` [PATCH v3 5/6] documentation: Add nvmem bindings documentation Carlo Caione 2016-08-27 13:43 ` Carlo Caione 2016-08-27 13:43 ` [PATCH v3 6/6] ARM64: dts: amlogic: gxbb: Enable NVMEM Carlo Caione 2016-08-27 13:43 ` Carlo Caione 2016-09-01 21:26 ` Kevin Hilman 2016-09-01 21:26 ` Kevin Hilman 2016-09-01 21:28 ` Carlo Caione 2016-09-01 21:28 ` Carlo Caione 2016-08-27 13:47 ` [PATCH v3 0/6] Add Amlogic secure monitor and NVMEM drivers Carlo Caione 2016-08-27 13:47 ` Carlo Caione 2016-09-01 21:27 ` Kevin Hilman 2016-09-01 21:27 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1472305428-16874-5-git-send-email-carlo@caione.org \ --to=carlo@caione.org \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.