From: Krzysztof Kozlowski <k.kozlowski@samsung.com> To: javier@osg.samsung.com, Arnd Bergmann <arnd@arndb.de>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Subject: [PATCH 1/2] ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 Date: Thu, 01 Sep 2016 10:37:01 +0200 [thread overview] Message-ID: <1472719022-27226-1-git-send-email-k.kozlowski@samsung.com> (raw) The pinctrl pull up/down register on exynos4210 is 2-bit wide for each pin and it accepts only values of 0, 1 and 3. The pins sd4-bus-width8 were configured with value of 4. The driver does not validate the value so this overflow effectively set a bit 1 in adjacent pins thus configuring them to pull down. The author's intention was probably to set drive strength of 4x. All other bus-widths pins are configured with pull up and drive strength of 4x. Fix this one with same pattern. Fixes: 87711d8c7c70 ("ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 8046340e50ac..d9b6d25e4abe 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -649,7 +649,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 Date: Thu, 01 Sep 2016 10:37:01 +0200 [thread overview] Message-ID: <1472719022-27226-1-git-send-email-k.kozlowski@samsung.com> (raw) The pinctrl pull up/down register on exynos4210 is 2-bit wide for each pin and it accepts only values of 0, 1 and 3. The pins sd4-bus-width8 were configured with value of 4. The driver does not validate the value so this overflow effectively set a bit 1 in adjacent pins thus configuring them to pull down. The author's intention was probably to set drive strength of 4x. All other bus-widths pins are configured with pull up and drive strength of 4x. Fix this one with same pattern. Fixes: 87711d8c7c70 ("ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 8046340e50ac..d9b6d25e4abe 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -649,7 +649,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; -- 1.9.1
next reply other threads:[~2016-09-01 8:37 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-09-01 8:37 Krzysztof Kozlowski [this message] 2016-09-01 8:37 ` [PATCH 1/2] ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 Krzysztof Kozlowski 2016-09-01 8:37 ` [PATCH 2/2] ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415 Krzysztof Kozlowski 2016-09-01 8:37 ` Krzysztof Kozlowski 2016-09-01 10:21 ` Javier Martinez Canillas 2016-09-01 10:21 ` Javier Martinez Canillas 2016-09-01 10:21 ` Javier Martinez Canillas 2016-09-01 11:21 ` Bartlomiej Zolnierkiewicz 2016-09-01 11:21 ` Bartlomiej Zolnierkiewicz 2016-09-01 11:26 ` Krzysztof Kozlowski 2016-09-01 11:26 ` Krzysztof Kozlowski 2016-09-01 10:19 ` [PATCH 1/2] ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 Javier Martinez Canillas 2016-09-01 10:19 ` Javier Martinez Canillas 2016-09-01 11:17 ` Bartlomiej Zolnierkiewicz 2016-09-01 11:17 ` Bartlomiej Zolnierkiewicz 2016-09-01 11:17 ` Bartlomiej Zolnierkiewicz
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1472719022-27226-1-git-send-email-k.kozlowski@samsung.com \ --to=k.kozlowski@samsung.com \ --cc=arnd@arndb.de \ --cc=b.zolnierkie@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=javier@osg.samsung.com \ --cc=kgene@kernel.org \ --cc=krzk@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.