From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5
Date: Fri, 16 Sep 2016 23:41:59 +0200 [thread overview]
Message-ID: <1474062122-22720-5-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474062122-22720-1-git-send-email-krzk@kernel.org>
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5.dtsi | 4 ++-
arch/arm/boot/dts/exynos5250.dtsi | 76 +++++++++++++++++++--------------------
arch/arm/boot/dts/exynos5410.dtsi | 16 ++++-----
arch/arm/boot/dts/exynos54xx.dtsi | 18 +++++-----
4 files changed, 58 insertions(+), 56 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d9b1607db5ad..7fd870ee5093 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
@@ -96,7 +97,8 @@
<0x10482000 0x1000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
sysreg_system_controller: syscon@10050000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4e00c0d06c67..b6d7444d8585 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10040000 {
@@ -236,7 +236,7 @@
watchdog@101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator@11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c@12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3@12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dae5715b41b9..2501249d97aa 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -121,7 +121,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +133,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +145,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +157,31 @@
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@14000000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 8640b01f1c94..0389e8a10d0b 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -76,20 +76,20 @@
watchdog: watchdog@101d0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c@12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x1000>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -98,7 +98,7 @@
hsi2c_5: i2c@12cb0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cb0000 0x1000>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -107,7 +107,7 @@
hsi2c_6: i2c@12cc0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cc0000 0x1000>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -116,7 +116,7 @@
hsi2c_7: i2c@12cd0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cd0000 0x1000>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -131,7 +131,7 @@
usbdrd_dwc3_0: dwc3@12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -166,7 +166,7 @@
usbhost2: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -179,7 +179,7 @@
usbhost1: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Krzysztof Kozlowski
<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Javier Martinez Canillas
<javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5
Date: Fri, 16 Sep 2016 23:41:59 +0200 [thread overview]
Message-ID: <1474062122-22720-5-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/exynos5.dtsi | 4 ++-
arch/arm/boot/dts/exynos5250.dtsi | 76 +++++++++++++++++++--------------------
arch/arm/boot/dts/exynos5410.dtsi | 16 ++++-----
arch/arm/boot/dts/exynos54xx.dtsi | 18 +++++-----
4 files changed, 58 insertions(+), 56 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d9b1607db5ad..7fd870ee5093 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
@@ -96,7 +97,8 @@
<0x10482000 0x1000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
sysreg_system_controller: syscon@10050000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4e00c0d06c67..b6d7444d8585 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10040000 {
@@ -236,7 +236,7 @@
watchdog@101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator@11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c@12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3@12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dae5715b41b9..2501249d97aa 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -121,7 +121,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +133,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +145,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +157,31 @@
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@14000000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 8640b01f1c94..0389e8a10d0b 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -76,20 +76,20 @@
watchdog: watchdog@101d0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c@12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x1000>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -98,7 +98,7 @@
hsi2c_5: i2c@12cb0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cb0000 0x1000>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -107,7 +107,7 @@
hsi2c_6: i2c@12cc0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cc0000 0x1000>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -116,7 +116,7 @@
hsi2c_7: i2c@12cd0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cd0000 0x1000>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -131,7 +131,7 @@
usbdrd_dwc3_0: dwc3@12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -166,7 +166,7 @@
usbhost2: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -179,7 +179,7 @@
usbhost1: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5
Date: Fri, 16 Sep 2016 23:41:59 +0200 [thread overview]
Message-ID: <1474062122-22720-5-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474062122-22720-1-git-send-email-krzk@kernel.org>
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5.dtsi | 4 ++-
arch/arm/boot/dts/exynos5250.dtsi | 76 +++++++++++++++++++--------------------
arch/arm/boot/dts/exynos5410.dtsi | 16 ++++-----
arch/arm/boot/dts/exynos54xx.dtsi | 18 +++++-----
4 files changed, 58 insertions(+), 56 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d9b1607db5ad..7fd870ee5093 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
@@ -96,7 +97,8 @@
<0x10482000 0x1000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
sysreg_system_controller: syscon at 10050000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4e00c0d06c67..b6d7444d8585 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl at 03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller at 10040000 {
@@ -236,7 +236,7 @@
watchdog at 101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d at 10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec at 11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator at 11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu at 10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c at 12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c at 12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c at 12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c at 12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c at 12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc at 12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc at 12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc at 12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc at 12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3 at 12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma at 121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma at 121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma at 10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma at 11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc at 13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc at 13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc at 13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc at 13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc at 12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dae5715b41b9..2501249d97aa 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -121,7 +121,7 @@
mmc_0: mmc at 12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +133,7 @@
mmc_1: mmc at 12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +145,7 @@
mmc_2: mmc at 12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +157,31 @@
pinctrl_0: pinctrl at 13400000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 14000000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 10d10000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl at 03860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 8640b01f1c94..0389e8a10d0b 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -76,20 +76,20 @@
watchdog: watchdog at 101d0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
sss: sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c at 12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x1000>;
- interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -98,7 +98,7 @@
hsi2c_5: i2c at 12cb0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cb0000 0x1000>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -107,7 +107,7 @@
hsi2c_6: i2c at 12cc0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cc0000 0x1000>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -116,7 +116,7 @@
hsi2c_7: i2c at 12cd0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cd0000 0x1000>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -131,7 +131,7 @@
usbdrd_dwc3_0: dwc3 at 12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -166,7 +166,7 @@
usbhost2: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -179,7 +179,7 @@
usbhost1: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
next prev parent reply other threads:[~2016-09-16 21:42 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 1/7] arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 2/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 3/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski [this message]
2016-09-16 21:41 ` [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 Krzysztof Kozlowski
2016-09-16 21:41 ` Krzysztof Kozlowski
2016-09-18 15:20 ` Javier Martinez Canillas
2016-09-18 15:20 ` Javier Martinez Canillas
2016-09-16 21:42 ` [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415 Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
2016-09-16 21:42 ` [PATCH 6/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
2016-09-16 21:42 ` [PATCH 7/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 Krzysztof Kozlowski
2016-09-16 21:42 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474062122-22720-5-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.