All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH v3 09/20] drm: omapdrm: Replace DSS manager state check with omapdrm CRTC state
Date: Mon, 19 Sep 2016 15:27:32 +0300	[thread overview]
Message-ID: <1474288063-5315-10-git-send-email-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <1474288063-5315-1-git-send-email-laurent.pinchart@ideasonboard.com>

Instead of conditioning planes update based on the DD manager state, use
the enabled field newly added to the omap_crtc structure. This reduces
the dependency from the DRM layer to the DSS layer.

The enabled field is a transitory measure, the implementation should use
the CRTC atomic state instead. However, given that CRTCs are currently
not enabled/disabled through their .enable() and .disable() operations
but through a convoluted code paths starting at the associated encoder
operations, there is not clear guarantee that the atomic state always
matches the hardware state. This will be refactored later, at which
point the enabled field will be removed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Changes since v2:

- Use enabled field in struct omap_crtc instead of CRTC atomic state
---
 drivers/gpu/drm/omapdrm/omap_crtc.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
index cdcfda31043e..f41a638c8d65 100644
--- a/drivers/gpu/drm/omapdrm/omap_crtc.c
+++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
@@ -40,6 +40,7 @@ struct omap_crtc {
 
 	bool ignore_digit_sync_lost;
 
+	bool enabled;
 	bool pending;
 	wait_queue_head_t pending_wait;
 };
@@ -136,6 +137,7 @@ static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
 
 	if (omap_crtc_output[channel]->output_type == OMAP_DISPLAY_TYPE_HDMI) {
 		dispc_mgr_enable(channel, enable);
+		omap_crtc->enabled = enable;
 		return;
 	}
 
@@ -172,6 +174,7 @@ static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
 	}
 
 	dispc_mgr_enable(channel, enable);
+	omap_crtc->enabled = enable;
 
 	ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100));
 	if (ret) {
@@ -421,18 +424,19 @@ static void omap_crtc_atomic_flush(struct drm_crtc *crtc,
 		dispc_mgr_set_gamma(omap_crtc->channel, lut, length);
 	}
 
-	if (dispc_mgr_is_enabled(omap_crtc->channel)) {
+	/* Only flush the CRTC if it is currently enabled. */
+	if (!omap_crtc->enabled)
+		return;
 
-		DBG("%s: GO", omap_crtc->name);
+	DBG("%s: GO", omap_crtc->name);
 
-		rmb();
-		WARN_ON(omap_crtc->pending);
-		omap_crtc->pending = true;
-		wmb();
+	rmb();
+	WARN_ON(omap_crtc->pending);
+	omap_crtc->pending = true;
+	wmb();
 
-		dispc_mgr_go(omap_crtc->channel);
-		omap_irq_register(crtc->dev, &omap_crtc->vblank_irq);
-	}
+	dispc_mgr_go(omap_crtc->channel);
+	omap_irq_register(crtc->dev, &omap_crtc->vblank_irq);
 }
 
 static bool omap_crtc_is_plane_prop(struct drm_device *dev,
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-09-19 12:27 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-19 12:27 [PATCH v3 00/20] OMAP DRM fixes and improvements Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 01/20] drm: omapdrm: fb: Limit number of planes per framebuffer to two Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 02/20] drm: omapdrm: fb: Use format information provided by the DRM core Laurent Pinchart
2016-09-20 12:47   ` Tomi Valkeinen
2016-12-12 21:41     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 03/20] drm: omapdrm: fb: Simplify objects lookup when creating framebuffer Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 04/20] drm: omapdrm: fb: Simplify mode command checks " Laurent Pinchart
2016-09-20 12:55   ` Tomi Valkeinen
2016-09-19 12:27 ` [PATCH v3 05/20] drm: omapdrm: fb: Turn framebuffer creation error messages into debug Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 06/20] drm: omapdrm: Handle FIFO underflow IRQs internally Laurent Pinchart
2016-09-20 13:17   ` Tomi Valkeinen
2016-09-20 13:27   ` Tomi Valkeinen
2016-12-12 21:59     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 07/20] drm: omapdrm: Handle CRTC error IRQs directly Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 08/20] drm: omapdrm: Handle OCP error IRQ directly Laurent Pinchart
2016-09-20 13:34   ` Tomi Valkeinen
2016-12-12 22:09     ` Laurent Pinchart
2016-09-19 12:27 ` Laurent Pinchart [this message]
2016-09-20 13:44   ` [PATCH v3 09/20] drm: omapdrm: Replace DSS manager state check with omapdrm CRTC state Tomi Valkeinen
2016-12-12 22:16     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 10/20] drm: omapdrm: Only commit planes on active CRTCs Laurent Pinchart
2016-09-20 13:51   ` Tomi Valkeinen
2016-12-12 22:53     ` Laurent Pinchart
2016-12-13  7:58       ` Tomi Valkeinen
2016-12-13 13:12         ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 11/20] drm: omapdrm: Check DSS manager state in the enable/disable helpers Laurent Pinchart
2016-09-20 13:57   ` Tomi Valkeinen
2016-12-12 23:07     ` Laurent Pinchart
2016-12-13  8:15       ` Tomi Valkeinen
2016-12-13 23:56         ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 12/20] drm: omapdrm: Prevent processing the same event multiple times Laurent Pinchart
2016-09-27 12:24   ` Tomi Valkeinen
2016-12-12 10:29     ` Laurent Pinchart
2016-09-27 15:05   ` Daniel Kurtz
2016-12-12 10:21     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 13/20] drm: omapdrm: Use a spinlock to protect the CRTC pending flag Laurent Pinchart
2016-09-27 12:27   ` Tomi Valkeinen
2016-09-19 12:27 ` [PATCH v3 14/20] drm: omapdrm: Keep vblank interrupt enabled while CRTC is active Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 15/20] drm: omapdrm: Don't expose the omap_irq_(un)register() functions Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 16/20] drm: omapdrm: Remove unused parameter from omap_drm_irq handler Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 17/20] drm: omapdrm: Don't call DISPC power handling in IRQ wait functions Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 18/20] drm: omapdrm: Make pipe2vbl function static Laurent Pinchart
2016-12-12 10:41   ` Tomi Valkeinen
2016-12-12 23:17     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 19/20] drm: omapdrm: Simplify IRQ wait implementation Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 20/20] drm: omapdrm: Remove global variables Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474288063-5315-10-git-send-email-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.