From: Randy Li <ayaka@soulik.info>
To: alsa-devel@alsa-project.org
Cc: sbkim73@samsung.com, s.nawrocki@samsung.com, lgirdwood@gmail.com,
broonie@kernel.org, perex@perex.cz, tiwai@suse.com,
krzk@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Randy Li <ayaka@soulik.info>
Subject: [PATCH v3] ASoC: exynos: organize the asoc audio into a menu
Date: Tue, 20 Sep 2016 02:57:50 +0800 [thread overview]
Message-ID: <1474311470-23175-1-git-send-email-ayaka@soulik.info> (raw)
It is simple sound card time, we could assign different codec
to a interface without making a specific driver for it. The SPDIF
and I2S interface for Samsung would be possible used by
simple-sound-card, but not sure about the PCM.
Those S3C time entries are left alone as I don't think any new board
would need them.
Signed-off-by: Randy Li <ayaka@soulik.info>
---
sound/soc/samsung/Kconfig | 57 ++++++++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 28 deletions(-)
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7b722b0..f6023b4 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,12 +1,14 @@
-config SND_SOC_SAMSUNG
+menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on (PLAT_SAMSUNG || ARCH_EXYNOS)
select SND_SOC_GENERIC_DMAENGINE_PCM
- help
+ ---help---
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.
+if SND_SOC_SAMSUNG
+
config SND_S3C24XX_I2S
tristate
@@ -18,22 +20,22 @@ config SND_S3C2412_SOC_I2S
select SND_S3C_I2SV2_SOC
config SND_SAMSUNG_PCM
- tristate
+ tristate "Samsung PCM interface support"
config SND_SAMSUNG_AC97
tristate
select SND_SOC_AC97_BUS
config SND_SAMSUNG_SPDIF
- tristate
+ tristate "Samsung SPDIF transmitter support"
select SND_SOC_SPDIF
config SND_SAMSUNG_I2S
- tristate
+ tristate "Samsung I2S interface support"
config SND_SOC_SAMSUNG_NEO1973_WM8753
tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
- depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
+ depends on MACH_NEO1973_GTA02
select SND_S3C24XX_I2S
select SND_SOC_WM8753
select SND_SOC_BT_SCO
@@ -43,7 +45,7 @@ config SND_SOC_SAMSUNG_NEO1973_WM8753
config SND_SOC_SAMSUNG_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
- depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C
+ depends on MACH_JIVE && I2C
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
@@ -51,7 +53,7 @@ config SND_SOC_SAMSUNG_JIVE_WM8750
config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
depends on I2C
select SND_SOC_WM8580
select SND_SAMSUNG_I2S
@@ -60,7 +62,6 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
@@ -70,7 +71,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8994
config SND_SOC_SAMSUNG_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
- depends on SND_SOC_SAMSUNG && MACH_SMDK2443
+ depends on MACH_SMDK2443
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -80,7 +81,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710
config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+ depends on ARCH_S3C24XX
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -90,7 +91,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650
config SND_SOC_SAMSUNG_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+ depends on ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
@@ -102,21 +103,21 @@ config SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+ depends on ARCH_S3C24XX && I2C
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC23_I2C
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_HERMES
tristate "SoC I2S Audio support for Simtec Hermes board"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+ depends on ARCH_S3C24XX && I2C
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC3X
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_H1940_UDA1380
tristate "Audio support for the HP iPAQ H1940"
- depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C
+ depends on ARCH_H1940 && I2C
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
@@ -124,7 +125,7 @@ config SND_SOC_SAMSUNG_H1940_UDA1380
config SND_SOC_SAMSUNG_RX1950_UDA1380
tristate "Audio support for the HP iPAQ RX1950"
- depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C
+ depends on MACH_RX1950 && I2C
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
@@ -132,7 +133,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380
config SND_SOC_SAMSUNG_SMDK_WM9713
tristate "SoC AC97 Audio support for SMDK with WM9713"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
select SND_SOC_WM9713
select SND_SAMSUNG_AC97
help
@@ -140,20 +141,19 @@ config SND_SOC_SAMSUNG_SMDK_WM9713
config SND_SOC_SMARTQ
tristate "SoC I2S Audio support for SmartQ board"
- depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C
+ depends on MACH_SMARTQ && I2C
select SND_SAMSUNG_I2S
select SND_SOC_WM8750
config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
- depends on SND_SOC_SAMSUNG
select SND_SAMSUNG_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
config SND_SOC_SMDK_WM8580_PCM
tristate "SoC PCM Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDKV210 || MACH_SMDKC110
depends on I2C
select SND_SOC_WM8580
select SND_SAMSUNG_PCM
@@ -162,7 +162,6 @@ config SND_SOC_SMDK_WM8580_PCM
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
@@ -172,7 +171,7 @@ config SND_SOC_SMDK_WM8994_PCM
config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
- depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER
+ depends on I2C && SPI_MASTER
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
@@ -182,14 +181,14 @@ config SND_SOC_SPEYSIDE
config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory"
- depends on SND_SOC_SAMSUNG && INPUT && I2C
+ depends on INPUT && I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8962
config SND_SOC_BELLS
tristate "Audio support for Wolfson Bells"
- depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+ depends on MFD_ARIZONA && I2C && SPI_MASTER
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5102
@@ -200,7 +199,7 @@ config SND_SOC_BELLS
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5100
@@ -208,7 +207,7 @@ config SND_SOC_LOWLAND
config SND_SOC_LITTLEMILL
tristate "Audio support for Wolfson Littlemill"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select MFD_WM8994
@@ -216,7 +215,7 @@ config SND_SOC_LITTLEMILL
config SND_SOC_SNOW
tristate "Audio support for Google Snow boards"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
select SND_SOC_MAX98090
select SND_SOC_MAX98095
select SND_SAMSUNG_I2S
@@ -226,6 +225,8 @@ config SND_SOC_SNOW
config SND_SOC_ARNDALE_RT5631_ALC5631
tristate "Audio support for RT5631(ALC5631) on Arndale Board"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
select SND_SAMSUNG_I2S
select SND_SOC_RT5631
+
+endif #SND_SOC_SAMSUNG
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: ayaka@soulik.info (Randy Li)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ASoC: exynos: organize the asoc audio into a menu
Date: Tue, 20 Sep 2016 02:57:50 +0800 [thread overview]
Message-ID: <1474311470-23175-1-git-send-email-ayaka@soulik.info> (raw)
It is simple sound card time, we could assign different codec
to a interface without making a specific driver for it. The SPDIF
and I2S interface for Samsung would be possible used by
simple-sound-card, but not sure about the PCM.
Those S3C time entries are left alone as I don't think any new board
would need them.
Signed-off-by: Randy Li <ayaka@soulik.info>
---
sound/soc/samsung/Kconfig | 57 ++++++++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 28 deletions(-)
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7b722b0..f6023b4 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,12 +1,14 @@
-config SND_SOC_SAMSUNG
+menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on (PLAT_SAMSUNG || ARCH_EXYNOS)
select SND_SOC_GENERIC_DMAENGINE_PCM
- help
+ ---help---
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.
+if SND_SOC_SAMSUNG
+
config SND_S3C24XX_I2S
tristate
@@ -18,22 +20,22 @@ config SND_S3C2412_SOC_I2S
select SND_S3C_I2SV2_SOC
config SND_SAMSUNG_PCM
- tristate
+ tristate "Samsung PCM interface support"
config SND_SAMSUNG_AC97
tristate
select SND_SOC_AC97_BUS
config SND_SAMSUNG_SPDIF
- tristate
+ tristate "Samsung SPDIF transmitter support"
select SND_SOC_SPDIF
config SND_SAMSUNG_I2S
- tristate
+ tristate "Samsung I2S interface support"
config SND_SOC_SAMSUNG_NEO1973_WM8753
tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
- depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
+ depends on MACH_NEO1973_GTA02
select SND_S3C24XX_I2S
select SND_SOC_WM8753
select SND_SOC_BT_SCO
@@ -43,7 +45,7 @@ config SND_SOC_SAMSUNG_NEO1973_WM8753
config SND_SOC_SAMSUNG_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
- depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C
+ depends on MACH_JIVE && I2C
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
@@ -51,7 +53,7 @@ config SND_SOC_SAMSUNG_JIVE_WM8750
config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
depends on I2C
select SND_SOC_WM8580
select SND_SAMSUNG_I2S
@@ -60,7 +62,6 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
@@ -70,7 +71,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8994
config SND_SOC_SAMSUNG_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
- depends on SND_SOC_SAMSUNG && MACH_SMDK2443
+ depends on MACH_SMDK2443
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -80,7 +81,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710
config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+ depends on ARCH_S3C24XX
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -90,7 +91,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650
config SND_SOC_SAMSUNG_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+ depends on ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
@@ -102,21 +103,21 @@ config SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+ depends on ARCH_S3C24XX && I2C
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC23_I2C
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_HERMES
tristate "SoC I2S Audio support for Simtec Hermes board"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+ depends on ARCH_S3C24XX && I2C
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC3X
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_H1940_UDA1380
tristate "Audio support for the HP iPAQ H1940"
- depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C
+ depends on ARCH_H1940 && I2C
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
@@ -124,7 +125,7 @@ config SND_SOC_SAMSUNG_H1940_UDA1380
config SND_SOC_SAMSUNG_RX1950_UDA1380
tristate "Audio support for the HP iPAQ RX1950"
- depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C
+ depends on MACH_RX1950 && I2C
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
@@ -132,7 +133,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380
config SND_SOC_SAMSUNG_SMDK_WM9713
tristate "SoC AC97 Audio support for SMDK with WM9713"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
select SND_SOC_WM9713
select SND_SAMSUNG_AC97
help
@@ -140,20 +141,19 @@ config SND_SOC_SAMSUNG_SMDK_WM9713
config SND_SOC_SMARTQ
tristate "SoC I2S Audio support for SmartQ board"
- depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C
+ depends on MACH_SMARTQ && I2C
select SND_SAMSUNG_I2S
select SND_SOC_WM8750
config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
- depends on SND_SOC_SAMSUNG
select SND_SAMSUNG_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
config SND_SOC_SMDK_WM8580_PCM
tristate "SoC PCM Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDKV210 || MACH_SMDKC110
depends on I2C
select SND_SOC_WM8580
select SND_SAMSUNG_PCM
@@ -162,7 +162,6 @@ config SND_SOC_SMDK_WM8580_PCM
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
@@ -172,7 +171,7 @@ config SND_SOC_SMDK_WM8994_PCM
config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
- depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER
+ depends on I2C && SPI_MASTER
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
@@ -182,14 +181,14 @@ config SND_SOC_SPEYSIDE
config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory"
- depends on SND_SOC_SAMSUNG && INPUT && I2C
+ depends on INPUT && I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8962
config SND_SOC_BELLS
tristate "Audio support for Wolfson Bells"
- depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+ depends on MFD_ARIZONA && I2C && SPI_MASTER
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5102
@@ -200,7 +199,7 @@ config SND_SOC_BELLS
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5100
@@ -208,7 +207,7 @@ config SND_SOC_LOWLAND
config SND_SOC_LITTLEMILL
tristate "Audio support for Wolfson Littlemill"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select MFD_WM8994
@@ -216,7 +215,7 @@ config SND_SOC_LITTLEMILL
config SND_SOC_SNOW
tristate "Audio support for Google Snow boards"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
select SND_SOC_MAX98090
select SND_SOC_MAX98095
select SND_SAMSUNG_I2S
@@ -226,6 +225,8 @@ config SND_SOC_SNOW
config SND_SOC_ARNDALE_RT5631_ALC5631
tristate "Audio support for RT5631(ALC5631) on Arndale Board"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
select SND_SAMSUNG_I2S
select SND_SOC_RT5631
+
+endif #SND_SOC_SAMSUNG
--
2.7.4
next reply other threads:[~2016-09-19 18:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-19 18:57 Randy Li [this message]
2016-09-19 18:57 ` [PATCH v3] ASoC: exynos: organize the asoc audio into a menu Randy Li
2016-09-20 17:26 ` Krzysztof Kozlowski
2016-09-20 17:26 ` Krzysztof Kozlowski
2016-09-25 5:58 ` Applied "ASoC: exynos: organize the asoc audio into a menu" to the asoc tree Mark Brown
2016-09-25 5:58 ` Mark Brown
2016-09-25 5:58 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474311470-23175-1-git-send-email-ayaka@soulik.info \
--to=ayaka@soulik.info \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=krzk@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=perex@perex.cz \
--cc=s.nawrocki@samsung.com \
--cc=sbkim73@samsung.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.