From: Shawn Lin <shawn.lin@rock-chips.com> To: Ulf Hansson <ulf.hansson@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com>, linux-mmc@vger.kernel.org, Doug Anderson <dianders@chromium.org>, Ziyuan Xu <xzy.xu@rock-chips.com>, linux-rockchip@lists.infradead.org, Shawn Lin <shawn.lin@rock-chips.com>, <stable@vger.kernel.org> Subject: [PATCH v3 1/3] mmc: core: switch to 1V8 or 1V2 for hs400es mode Date: Fri, 30 Sep 2016 14:18:58 +0800 [thread overview] Message-ID: <1475216340-15344-1-git-send-email-shawn.lin@rock-chips.com> (raw) When introducing hs400es, I didn't notice that we haven't switched voltage to 1V2 or 1V8 for it. That happens to work as the first controller claiming to support hs400es, arasan(5.1), which is designed to only support 1V8. So the voltage is fixed to 1V8. But it actually is wrong, and will not fit for other host controllers. Let's fix it. Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- Changes in v3: - add Doug's tag Changes in v2: - fix copy-paste error, mea culpa drivers/mmc/core/mmc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3486bc7..f4ed5ac 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; } + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto out_err; + err = mmc_select_bus_width(card); if (err < 0) goto out_err; -- 2.3.7
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Lin <shawn.lin@rock-chips.com> To: Ulf Hansson <ulf.hansson@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com>, linux-mmc@vger.kernel.org, Doug Anderson <dianders@chromium.org>, Ziyuan Xu <xzy.xu@rock-chips.com>, linux-rockchip@lists.infradead.org, Shawn Lin <shawn.lin@rock-chips.com>, stable@vger.kernel.org Subject: [PATCH v3 1/3] mmc: core: switch to 1V8 or 1V2 for hs400es mode Date: Fri, 30 Sep 2016 14:18:58 +0800 [thread overview] Message-ID: <1475216340-15344-1-git-send-email-shawn.lin@rock-chips.com> (raw) When introducing hs400es, I didn't notice that we haven't switched voltage to 1V2 or 1V8 for it. That happens to work as the first controller claiming to support hs400es, arasan(5.1), which is designed to only support 1V8. So the voltage is fixed to 1V8. But it actually is wrong, and will not fit for other host controllers. Let's fix it. Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- Changes in v3: - add Doug's tag Changes in v2: - fix copy-paste error, mea culpa drivers/mmc/core/mmc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3486bc7..f4ed5ac 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; } + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto out_err; + err = mmc_select_bus_width(card); if (err < 0) goto out_err; -- 2.3.7
next reply other threads:[~2016-09-30 6:16 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-09-30 6:18 Shawn Lin [this message] 2016-09-30 6:18 ` [PATCH v3 1/3] mmc: core: switch to 1V8 or 1V2 for hs400es mode Shawn Lin 2016-09-30 6:18 ` [PATCH v3 2/3] mmc: core: changes frequency to hs_max_dtr when selecting hs400es Shawn Lin [not found] ` <1475216340-15344-2-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> 2016-10-10 12:38 ` Ulf Hansson 2016-09-30 6:19 ` [PATCH v3 3/3] mmc: sdhci-of-arasan: add sdhci_arasan_voltage_switch for arasan,5.1 Shawn Lin [not found] ` <1475216340-15344-3-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> 2016-10-10 12:38 ` Ulf Hansson 2016-10-10 12:38 ` [PATCH v3 1/3] mmc: core: switch to 1V8 or 1V2 for hs400es mode Ulf Hansson 2016-10-10 12:38 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1475216340-15344-1-git-send-email-shawn.lin@rock-chips.com \ --to=shawn.lin@rock-chips.com \ --cc=adrian.hunter@intel.com \ --cc=dianders@chromium.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=stable@vger.kernel.org \ --cc=ulf.hansson@linaro.org \ --cc=xzy.xu@rock-chips.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.