All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>,
	Carlo Caione <carlo@caione.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-gpio@vger.kernel.org
Subject: [RFC 08/10] ARM64: dts: amlogic: enable gpio interrupt controller on gxbb
Date: Tue,  4 Oct 2016 17:08:26 +0200	[thread overview]
Message-ID: <1475593708-10526-9-git-send-email-jbrunet@baylibre.com> (raw)
In-Reply-To: <1475593708-10526-1-git-send-email-jbrunet@baylibre.com>

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 610e0e1c3cee..e5c6372dbe1c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -183,6 +183,21 @@
 				#reset-cells = <1>;
 			};
 
+			gpio_interrupt: interrupt-controller@9880 {
+				compatible = "amlogic,gxbb-gpio-intc";
+				reg = <0x0 0x9880 0x0 0x10>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>,
+					   <GIC_SPI 65 IRQ_TYPE_NONE>,
+					   <GIC_SPI 66 IRQ_TYPE_NONE>,
+					   <GIC_SPI 67 IRQ_TYPE_NONE>,
+					   <GIC_SPI 68 IRQ_TYPE_NONE>,
+					   <GIC_SPI 69 IRQ_TYPE_NONE>,
+					   <GIC_SPI 70 IRQ_TYPE_NONE>,
+					   <GIC_SPI 71 IRQ_TYPE_NONE>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x84c0 0x0 0x14>;
@@ -307,6 +322,7 @@
 					reg-names = "mux", "pull", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
+					interrupt-parent = <&gpio_interrupt>;
 				};
 
 				uart_ao_a_pins: uart_ao_a {
@@ -426,6 +442,7 @@
 					reg-names = "mux", "pull", "pull-enable", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
+					interrupt-parent = <&gpio_interrupt>;
 				};
 
 				emmc_pins: emmc {
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 08/10] ARM64: dts: amlogic: enable gpio interrupt controller on gxbb
Date: Tue,  4 Oct 2016 17:08:26 +0200	[thread overview]
Message-ID: <1475593708-10526-9-git-send-email-jbrunet@baylibre.com> (raw)
In-Reply-To: <1475593708-10526-1-git-send-email-jbrunet@baylibre.com>

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 610e0e1c3cee..e5c6372dbe1c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -183,6 +183,21 @@
 				#reset-cells = <1>;
 			};
 
+			gpio_interrupt: interrupt-controller at 9880 {
+				compatible = "amlogic,gxbb-gpio-intc";
+				reg = <0x0 0x9880 0x0 0x10>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>,
+					   <GIC_SPI 65 IRQ_TYPE_NONE>,
+					   <GIC_SPI 66 IRQ_TYPE_NONE>,
+					   <GIC_SPI 67 IRQ_TYPE_NONE>,
+					   <GIC_SPI 68 IRQ_TYPE_NONE>,
+					   <GIC_SPI 69 IRQ_TYPE_NONE>,
+					   <GIC_SPI 70 IRQ_TYPE_NONE>,
+					   <GIC_SPI 71 IRQ_TYPE_NONE>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
 			uart_A: serial at 84c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x84c0 0x0 0x14>;
@@ -307,6 +322,7 @@
 					reg-names = "mux", "pull", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
+					interrupt-parent = <&gpio_interrupt>;
 				};
 
 				uart_ao_a_pins: uart_ao_a {
@@ -426,6 +442,7 @@
 					reg-names = "mux", "pull", "pull-enable", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
+					interrupt-parent = <&gpio_interrupt>;
 				};
 
 				emmc_pins: emmc {
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [RFC 08/10] ARM64: dts: amlogic: enable gpio interrupt controller on gxbb
Date: Tue,  4 Oct 2016 17:08:26 +0200	[thread overview]
Message-ID: <1475593708-10526-9-git-send-email-jbrunet@baylibre.com> (raw)
In-Reply-To: <1475593708-10526-1-git-send-email-jbrunet@baylibre.com>

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 610e0e1c3cee..e5c6372dbe1c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -183,6 +183,21 @@
 				#reset-cells = <1>;
 			};
 
+			gpio_interrupt: interrupt-controller at 9880 {
+				compatible = "amlogic,gxbb-gpio-intc";
+				reg = <0x0 0x9880 0x0 0x10>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>,
+					   <GIC_SPI 65 IRQ_TYPE_NONE>,
+					   <GIC_SPI 66 IRQ_TYPE_NONE>,
+					   <GIC_SPI 67 IRQ_TYPE_NONE>,
+					   <GIC_SPI 68 IRQ_TYPE_NONE>,
+					   <GIC_SPI 69 IRQ_TYPE_NONE>,
+					   <GIC_SPI 70 IRQ_TYPE_NONE>,
+					   <GIC_SPI 71 IRQ_TYPE_NONE>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
 			uart_A: serial at 84c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x84c0 0x0 0x14>;
@@ -307,6 +322,7 @@
 					reg-names = "mux", "pull", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
+					interrupt-parent = <&gpio_interrupt>;
 				};
 
 				uart_ao_a_pins: uart_ao_a {
@@ -426,6 +442,7 @@
 					reg-names = "mux", "pull", "pull-enable", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
+					interrupt-parent = <&gpio_interrupt>;
 				};
 
 				emmc_pins: emmc {
-- 
2.7.4

  parent reply	other threads:[~2016-10-04 15:08 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-04 15:08 [RFC 00/10] irqchip: meson: add support for the gpio interrupt controller Jerome Brunet
2016-10-04 15:08 ` Jerome Brunet
2016-10-04 15:08 ` Jerome Brunet
     [not found] ` <1475593708-10526-1-git-send-email-jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2016-10-04 15:08   ` [RFC 01/10] irqchip: meson: add support for " Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08   ` [RFC 02/10] dt-bindings: interrupt-controller: add DT binding for meson GPIO " Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-09  1:29     ` Rob Herring
2016-10-09  1:29       ` Rob Herring
2016-10-09  1:29       ` Rob Herring
2016-10-10  8:11       ` Jerome Brunet
2016-10-10  8:11         ` Jerome Brunet
2016-10-10  8:11         ` Jerome Brunet
2016-10-04 15:08   ` [RFC 03/10] pinctrl: meson: update pinctrl data with gpio irq base number Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08   ` [RFC 04/10] pinctrl: meson: allow gpio to request irq Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08   ` [RFC 05/10] dt-bindings: pinctrl: meson: update gpio dt-bindings Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-08 23:33     ` Rob Herring
     [not found]     ` <1475593708-10526-6-git-send-email-jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2016-10-09  1:29       ` Rob Herring
2016-10-09  1:29         ` Rob Herring
2016-10-09  1:29         ` Rob Herring
2016-10-04 15:08   ` [RFC 07/10] ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8 Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08   ` [RFC 09/10] ARM: dts: amlogic: enable gpio interrupt controller on meson8 Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08     ` Jerome Brunet
2016-10-04 15:08 ` [RFC 06/10] ARM64: meson: enable MESON_IRQ_GPIO in Kconfig Jerome Brunet
2016-10-04 15:08   ` Jerome Brunet
2016-10-04 15:08   ` Jerome Brunet
2016-10-04 15:08 ` Jerome Brunet [this message]
2016-10-04 15:08   ` [RFC 08/10] ARM64: dts: amlogic: enable gpio interrupt controller on gxbb Jerome Brunet
2016-10-04 15:08   ` Jerome Brunet
2016-10-04 15:08 ` [RFC 10/10] irqchip: meson: Add support for IRQ_TYPE_EDGE_BOTH Jerome Brunet
2016-10-04 15:08   ` Jerome Brunet
2016-10-04 15:08   ` Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475593708-10526-9-git-send-email-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=carlo@caione.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.