From: Shawn Lin <shawn.lin@rock-chips.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, linux-rockchip@lists.infradead.org,
Rajat Jain <rajatja@google.com>,
Wenrui Li <wenrui.li@rock-chips.com>,
Brian Norris <briannorris@chromium.org>,
Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH 1/2] PCI: rockchip: Provide captured slot power limit and scale
Date: Wed, 5 Oct 2016 16:50:16 +0800 [thread overview]
Message-ID: <1475657417-29163-1-git-send-email-shawn.lin@rock-chips.com> (raw)
If vpcie3v3 is available, we could provide these information
via RC's configure register to make EP able to know the power
limit.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
drivers/pci/host/pcie-rockchip.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
index b8c82fc..7d16669 100644
--- a/drivers/pci/host/pcie-rockchip.c
+++ b/drivers/pci/host/pcie-rockchip.c
@@ -135,6 +135,10 @@
#define PCIE_RC_CONFIG_VENDOR (PCIE_RC_CONFIG_BASE + 0x00)
#define PCIE_RC_CONFIG_RID_CCR (PCIE_RC_CONFIG_BASE + 0x08)
#define PCIE_RC_CONFIG_SCC_SHIFT 16
+#define PCIE_RC_CONFIG_DCR (PCIE_RC_CONFIG_BASE + 0xc4)
+#define PCIE_RC_CONFIG_DCR_CSPL_SHIFT 18
+#define PCIE_RC_CONFIG_DCR_CSPL_LIMIT 0xff
+#define PCIE_RC_CONFIG_DCR_CPLS_SHIFT 26
#define PCIE_RC_CONFIG_LCS (PCIE_RC_CONFIG_BASE + 0xd0)
#define PCIE_RC_CONFIG_LCS_RETRAIN_LINK BIT(5)
#define PCIE_RC_CONFIG_LCS_LBMIE BIT(10)
@@ -395,6 +399,40 @@ static struct pci_ops rockchip_pcie_ops = {
.write = rockchip_pcie_wr_conf,
};
+static void rockchip_pcie_set_power_limit(struct rockchip_pcie *rockchip)
+{
+ u32 status, curr, scale, power;
+
+ if (IS_ERR(rockchip->vpcie3v3))
+ return;
+
+ /*
+ * Set RC's captured slot power limit and scale if
+ * vpcie3v3 available. The default values are both zero
+ * which means the software should set these two according
+ * to the actual power supply.
+ */
+ curr = regulator_get_current_limit(rockchip->vpcie3v3);
+ if (curr > 0) {
+ scale = 3; /* 0.001x */
+ curr = curr / 1000; /* convert to mA */
+ power = (curr * 3300) / 1000; /* milliwatt */
+ while (power > PCIE_RC_CONFIG_DCR_CSPL_LIMIT) {
+ if (!scale) {
+ dev_warn(rockchip->dev, "invalid power supply\n");
+ return;
+ }
+ scale--;
+ power = power / 10;
+ }
+
+ status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_DCR);
+ status |= (power << PCIE_RC_CONFIG_DCR_CSPL_SHIFT) |
+ (scale << PCIE_RC_CONFIG_DCR_CPLS_SHIFT);
+ rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR);
+ }
+}
+
/**
* rockchip_pcie_init_port - Initialize hardware
* @rockchip: PCIe port information
@@ -496,6 +534,8 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
(PCIE_CORE_CTRL_PLC1_FTS_CNT << PCIE_CORE_CTRL_PLC1_FTS_SHIFT);
rockchip_pcie_write(rockchip, status, PCIE_CORE_CTRL_PLC1);
+ rockchip_pcie_set_power_limit(rockchip);
+
/* Enable Gen1 training */
rockchip_pcie_write(rockchip, PCIE_CLIENT_LINK_TRAIN_ENABLE,
PCIE_CLIENT_CONFIG);
--
2.3.7
next reply other threads:[~2016-10-05 8:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-05 8:50 Shawn Lin [this message]
2016-10-05 8:50 ` [PATCH 2/2] PCI: rockchip: Mark RC as common clock architecture Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475657417-29163-1-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=bhelgaas@google.com \
--cc=briannorris@chromium.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rajatja@google.com \
--cc=wenrui.li@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.