All of lore.kernel.org
 help / color / mirror / Atom feed
From: Loic Pallardy <loic.pallardy@st.com>
To: bjorn.andersson@linaro.org, ohad@wizery.com, lee.jones@linaro.org
Cc: loic.pallardy@st.com, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@stlinux.com
Subject: [PATCH v3 03/20] remoteproc: core: Add function to amend an existing resource table entry
Date: Wed, 12 Oct 2016 18:00:21 +0200	[thread overview]
Message-ID: <1476288038-24909-4-git-send-email-loic.pallardy@st.com> (raw)
In-Reply-To: <1476288038-24909-1-git-send-email-loic.pallardy@st.com>

From: Lee Jones <lee.jones@linaro.org>

Sometimes the firmware does not know best.

When a firmware is built, it can be loaded with a resource table, usually
detailing shared; memory, virtual device, trace log information etc.
However, some vendors require this hard-coded information to be amended
with new/improved information obtained from Device Tree for instance.

Until now, no method exists which allows the resource table to be amended.
The addition of this function changes that.  It is now possible to pull in
a resource table and amend it before it is finally shared with the remote
device.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
---
 drivers/remoteproc/remoteproc_core.c | 63 ++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3c8395b..c3830b4 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -909,6 +909,69 @@ int rproc_request_resource(struct rproc *rproc, u32 type, void *resource)
 }
 EXPORT_SYMBOL(rproc_request_resource);
 
+static int rproc_update_resource_table_entry(struct rproc *rproc,
+				struct rproc_request_resource *request,
+				struct resource_table *table, int size)
+{
+	struct fw_rsc_carveout *tblc, *newc;
+	struct fw_rsc_devmem *tbld, *newd;
+	struct fw_rsc_trace *tblt, *newt;
+	int updated = true;
+	int i;
+
+	for (i = 0; i < table->num; i++) {
+		int offset = table->offset[i];
+		struct fw_rsc_hdr *hdr = (void *)table + offset;
+		void *rsc = (void *)hdr + sizeof(*hdr);
+
+		if (request->type != hdr->type)
+			continue;
+
+		switch (hdr->type) {
+		case RSC_CARVEOUT:
+			tblc = rsc;
+			newc = request->resource;
+
+			if (strncmp(newc->name, tblc->name,
+				    sizeof(*tblc->name)))
+				break;
+
+			memcpy(tblc, newc, request->size);
+
+			return updated;
+		case RSC_DEVMEM:
+			tbld = rsc;
+			newd = request->resource;
+
+			if (strncmp(newd->name, tbld->name,
+				    sizeof(*tbld->name)))
+				break;
+
+			memcpy(tbld, newd, request->size);
+
+			return updated;
+		case RSC_TRACE:
+			tblt = rsc;
+			newt = request->resource;
+
+			if (strncmp(newt->name, tblt->name,
+				    sizeof(*tblt->name)))
+				break;
+
+			memcpy(tblt, newt, request->size);
+
+			return updated;
+		default:
+			dev_err(&rproc->dev,
+				"Unsupported resource type: %d\n",
+				hdr->type);
+			return -EINVAL;
+		}
+	}
+
+	return !updated;
+}
+
 /*
  * take a firmware and boot a remote processor with it.
  */
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Loic Pallardy <loic.pallardy@st.com>
To: <bjorn.andersson@linaro.org>, <ohad@wizery.com>, <lee.jones@linaro.org>
Cc: <loic.pallardy@st.com>, <linux-remoteproc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <kernel@stlinux.com>
Subject: [PATCH v3 03/20] remoteproc: core: Add function to amend an existing resource table entry
Date: Wed, 12 Oct 2016 18:00:21 +0200	[thread overview]
Message-ID: <1476288038-24909-4-git-send-email-loic.pallardy@st.com> (raw)
In-Reply-To: <1476288038-24909-1-git-send-email-loic.pallardy@st.com>

From: Lee Jones <lee.jones@linaro.org>

Sometimes the firmware does not know best.

When a firmware is built, it can be loaded with a resource table, usually
detailing shared; memory, virtual device, trace log information etc.
However, some vendors require this hard-coded information to be amended
with new/improved information obtained from Device Tree for instance.

Until now, no method exists which allows the resource table to be amended.
The addition of this function changes that.  It is now possible to pull in
a resource table and amend it before it is finally shared with the remote
device.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
---
 drivers/remoteproc/remoteproc_core.c | 63 ++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3c8395b..c3830b4 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -909,6 +909,69 @@ int rproc_request_resource(struct rproc *rproc, u32 type, void *resource)
 }
 EXPORT_SYMBOL(rproc_request_resource);
 
+static int rproc_update_resource_table_entry(struct rproc *rproc,
+				struct rproc_request_resource *request,
+				struct resource_table *table, int size)
+{
+	struct fw_rsc_carveout *tblc, *newc;
+	struct fw_rsc_devmem *tbld, *newd;
+	struct fw_rsc_trace *tblt, *newt;
+	int updated = true;
+	int i;
+
+	for (i = 0; i < table->num; i++) {
+		int offset = table->offset[i];
+		struct fw_rsc_hdr *hdr = (void *)table + offset;
+		void *rsc = (void *)hdr + sizeof(*hdr);
+
+		if (request->type != hdr->type)
+			continue;
+
+		switch (hdr->type) {
+		case RSC_CARVEOUT:
+			tblc = rsc;
+			newc = request->resource;
+
+			if (strncmp(newc->name, tblc->name,
+				    sizeof(*tblc->name)))
+				break;
+
+			memcpy(tblc, newc, request->size);
+
+			return updated;
+		case RSC_DEVMEM:
+			tbld = rsc;
+			newd = request->resource;
+
+			if (strncmp(newd->name, tbld->name,
+				    sizeof(*tbld->name)))
+				break;
+
+			memcpy(tbld, newd, request->size);
+
+			return updated;
+		case RSC_TRACE:
+			tblt = rsc;
+			newt = request->resource;
+
+			if (strncmp(newt->name, tblt->name,
+				    sizeof(*tblt->name)))
+				break;
+
+			memcpy(tblt, newt, request->size);
+
+			return updated;
+		default:
+			dev_err(&rproc->dev,
+				"Unsupported resource type: %d\n",
+				hdr->type);
+			return -EINVAL;
+		}
+	}
+
+	return !updated;
+}
+
 /*
  * take a firmware and boot a remote processor with it.
  */
-- 
1.9.1

  parent reply	other threads:[~2016-10-12 16:00 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-12 16:00 [PATCH v3 00/20] remoteproc: Allow platform-specific drivers to request resources Loic Pallardy
2016-10-12 16:00 ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 01/20] remoteproc: core: New API to add new resources to the resource table Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 02/20] remoteproc: core: Add function to dump " Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-14  8:37   ` Matt Redfearn
2016-10-14  8:37     ` Matt Redfearn
2016-10-17 16:26     ` loic pallardy
2016-10-17 16:26       ` loic pallardy
2016-10-12 16:00 ` Loic Pallardy [this message]
2016-10-12 16:00   ` [PATCH v3 03/20] remoteproc: core: Add function to amend an existing resource table entry Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 04/20] remoteproc: core: Add function to append a new " Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 05/20] remoteproc: core: Add function to over-ride current resource table Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 06/20] remoteproc: core: Associate action to resource request Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 07/20] remoteproc: core: Add RSC_VDEV support to rproc_request_resource Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 08/20] remoteproc: core: Complete VDEV support in rproc_dump_resource_table function Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 09/20] remoteproc: core: Unify rproc_dump_resource_table debug messages Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 10/20] remoteproc: core: Call rproc_dump_resource_table only if debug is activated Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 11/20] remoteproc: core: Correction carveout name comparison in rproc_update_resource_table_entry Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 12/20] remoteproc: core: Add function to verify an existing resource in rsc table Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 13/20] remoteproc: core: Add vdev support to resource amending function Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 14/20] remoteproc: core: Add force mode " Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 15/20] remoteproc: core: Append resource only if .resource_table section is large enough Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 16/20] remoteproc: core: Add resource request action support Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 17/20] remoteproc: core: Add function to verify resource table consistency Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 18/20] remoteproc: core: Clean-up resource table sanity checks Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 19/20] remotecore: core: Add resource table pointer argument to rproc_handle_resource Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy
2016-10-12 16:00 ` [PATCH v3 20/20] remoteproc: core: Support empty resource tables Loic Pallardy
2016-10-12 16:00   ` Loic Pallardy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476288038-24909-4-git-send-email-loic.pallardy@st.com \
    --to=loic.pallardy@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=kernel@stlinux.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.