All of lore.kernel.org
 help / color / mirror / Atom feed
From: akash.goel@intel.com
To: intel-gfx@lists.freedesktop.org
Cc: Akash Goel <akash.goel@intel.com>
Subject: [PATCH 12/18] drm/i915: Increase GuC log buffer size to reduce flush interrupts
Date: Wed, 12 Oct 2016 21:54:38 +0530	[thread overview]
Message-ID: <1476289484-13682-13-git-send-email-akash.goel@intel.com> (raw)
In-Reply-To: <1476289484-13682-1-git-send-email-akash.goel@intel.com>

From: Akash Goel <akash.goel@intel.com>

In cases where GuC generate logs at a very high rate, correspondingly
the rate of flush interrupts is also very high.
So far total 8 pages were allocated for storing both ISR & DPC logs.
As per the half-full draining protocol followed by GuC, by doubling
the number of pages, the frequency of flush interrupts can be cut down
to almost half, which then helps in reducing the logging overhead.
So now allocating 8 pages apiece for ISR & DPC logs.
This also helps in reducing the output log file size, apart from
reducing the flush interrupt count. With the original settings,
44 KB was needed for one snapshot. With modified settings, 76 KB is
needed for a snapshot which will be equivalent to 2 snapshots of the
original setting. So 12KB saving, every 88 KB, over the original setting.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/intel_guc_fwif.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_guc_fwif.h b/drivers/gpu/drm/i915/intel_guc_fwif.h
index adb1ffd..324ea90 100644
--- a/drivers/gpu/drm/i915/intel_guc_fwif.h
+++ b/drivers/gpu/drm/i915/intel_guc_fwif.h
@@ -104,9 +104,9 @@
 #define   GUC_LOG_ALLOC_IN_MEGABYTE	(1 << 3)
 #define   GUC_LOG_CRASH_PAGES		1
 #define   GUC_LOG_CRASH_SHIFT		4
-#define   GUC_LOG_DPC_PAGES		3
+#define   GUC_LOG_DPC_PAGES		7
 #define   GUC_LOG_DPC_SHIFT		6
-#define   GUC_LOG_ISR_PAGES		3
+#define   GUC_LOG_ISR_PAGES		7
 #define   GUC_LOG_ISR_SHIFT		9
 #define   GUC_LOG_BUF_ADDR_SHIFT	12
 
@@ -437,9 +437,9 @@ enum guc_log_buffer_type {
  *        |   Crash dump state header     |
  * Page1  +-------------------------------+
  *        |           ISR logs            |
- * Page5  +-------------------------------+
- *        |           DPC logs            |
  * Page9  +-------------------------------+
+ *        |           DPC logs            |
+ * Page17 +-------------------------------+
  *        |         Crash Dump logs       |
  *        +-------------------------------+
  *
-- 
1.9.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2016-10-12 16:07 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-12 16:24 [PATCH v10 00/18] Support for sustained capturing of GuC firmware logs akash.goel
2016-10-12 16:24 ` [PATCH 01/18] drm/i915: Decouple GuC log setup from verbosity parameter akash.goel
2016-10-12 16:24 ` [PATCH 02/18] drm/i915: Add GuC ukernel logging related fields to fw interface file akash.goel
2016-10-12 16:24 ` [PATCH 03/18] drm/i915: New structure to contain GuC logging related fields akash.goel
2016-10-12 16:24 ` [PATCH 04/18] drm/i915: Add low level set of routines for programming PM IER/IIR/IMR register set akash.goel
2016-10-12 16:24 ` [PATCH 05/18] drm/i915: Support for GuC interrupts akash.goel
2016-10-12 16:24 ` [PATCH 06/18] drm/i915: Handle log buffer flush interrupt event from GuC akash.goel
2016-10-12 16:24 ` [PATCH 07/18] relay: Use per CPU constructs for the relay channel buffer pointers akash.goel
2016-10-12 16:24 ` [PATCH 08/18] drm/i915: Add a relay backed debugfs interface for capturing GuC logs akash.goel
2016-10-12 16:24 ` [PATCH 09/18] drm/i915: New lock to serialize the Host2GuC actions akash.goel
2016-10-12 16:24 ` [PATCH 10/18] drm/i915: Add stats for GuC log buffer flush interrupts akash.goel
2016-10-12 16:24 ` [PATCH 11/18] drm/i915: Optimization to reduce the sampling time of GuC log buffer akash.goel
2016-10-12 16:24 ` akash.goel [this message]
2016-10-12 16:24 ` [PATCH 13/18] drm/i915: Augment i915 error state to include the dump " akash.goel
2016-10-12 16:24 ` [PATCH 14/18] drm/i915: Support for forceful flush " akash.goel
2016-10-12 16:24 ` [PATCH 15/18] drm/i915: Debugfs support for GuC logging control akash.goel
2016-10-12 16:24 ` [PATCH 16/18] drm/i915: Use SSE4.1 movntdqa based memcpy for sampling GuC log buffer akash.goel
2016-10-12 16:24 ` [PATCH 17/18] drm/i915: Early creation of relay channel for capturing boot time logs akash.goel
2016-10-12 16:24 ` [PATCH 18/18] drm/i915: Mark the GuC log buffer flush interrupts handling WQ as freezable akash.goel
2016-10-12 17:50 ` ✗ Fi.CI.BAT: warning for Support for sustained capturing of GuC firmware logs (rev11) Patchwork
2016-10-12 18:36   ` Saarinen, Jani
2016-10-13  7:48     ` Tvrtko Ursulin
2016-10-13 10:27       ` Goel, Akash
2016-10-25  9:33       ` Tvrtko Ursulin
  -- strict thread matches above, loose matches on Subject: below --
2016-09-08 10:39 [PATCH v9 00/18] Support for sustained capturing of GuC firmware logs akash.goel
2016-09-08 10:39 ` [PATCH 12/18] drm/i915: Increase GuC log buffer size to reduce flush interrupts akash.goel
2016-08-15 14:49 [PATCH v6 00/18] Support for sustained capturing of GuC firmware logs akash.goel
2016-08-15 14:49 ` [PATCH 12/18] drm/i915: Increase GuC log buffer size to reduce flush interrupts akash.goel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476289484-13682-13-git-send-email-akash.goel@intel.com \
    --to=akash.goel@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.