All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sinan Kaya <okaya@codeaurora.org>
To: linux-acpi@vger.kernel.org, rjw@rjwysocki.net,
	bhelgaas@google.com, ravikanth.nalla@hpe.com,
	linux@rainbow-software.org, timur@codeaurora.org,
	cov@codeaurora.org, jcm@redhat.com, alex.williamson@redhat.com
Cc: net147@gmail.com, linux-pci@vger.kernel.org,
	agross@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, wim@djo.tudelft.nl,
	Sinan Kaya <okaya@codeaurora.org>,
	Len Brown <len.brown@intel.com>, Pavel Machek <pavel@ucw.cz>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH V5 2/3] ACPI: pci_link: penalize SCI correctly
Date: Mon, 24 Oct 2016 00:31:31 -0400	[thread overview]
Message-ID: <1477283492-26657-3-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1477283492-26657-1-git-send-email-okaya@codeaurora.org>

Ondrej reported that IRQs stopped working in v4.7 on several
platforms.  A typical scenario, from Ondrej's VT82C694X/694X, is:

ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: No IRQ available for PCI Interrupt Link [LNKA]
8139too 0000:00:0f.0: PCI INT A: no GSI

We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already
active at IRQ 11. In that case, acpi_pci_link_allocate() only tries
to use the active IRQ (IRQ 11) which also happens to be the SCI.

We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but
irq_get_trigger_type(11) returns something other than
IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS
instead, which makes acpi_pci_link_allocate() assume the IRQ isn't
available and give up.

Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ,
trigger, and polarity directly and we don't have to depend on
irq_get_trigger_type().

Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 arch/x86/kernel/acpi/boot.c |  1 +
 drivers/acpi/pci_link.c     | 30 +++++++++++++++---------------
 include/linux/acpi.h        |  1 +
 3 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 90d84c3..0ffd26e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -453,6 +453,7 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
 		polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
 
 	mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+	acpi_penalize_sci_irq(bus_irq, trigger, polarity);
 
 	/*
 	 * stash over-ride to indicate we've been here
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 6229b02..74bf96e 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -87,6 +87,7 @@ struct acpi_pci_link {
 
 static LIST_HEAD(acpi_link_list);
 static DEFINE_MUTEX(acpi_link_lock);
+static int sci_irq = -1, sci_penalty;
 
 /* --------------------------------------------------------------------------
                             PCI Link Device Management
@@ -496,25 +497,13 @@ static int acpi_irq_get_penalty(int irq)
 {
 	int penalty = 0;
 
-	/*
-	* Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict
-	* with PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be
-	* use for PCI IRQs.
-	*/
-	if (irq == acpi_gbl_FADT.sci_interrupt) {
-		u32 type = irq_get_trigger_type(irq) & IRQ_TYPE_SENSE_MASK;
-
-		if (type != IRQ_TYPE_LEVEL_LOW)
-			penalty += PIRQ_PENALTY_ISA_ALWAYS;
-		else
-			penalty += PIRQ_PENALTY_PCI_USING;
-	}
+	if (irq == sci_irq)
+		penalty += sci_penalty;
 
 	if (irq < ACPI_MAX_ISA_IRQS)
 		return penalty + acpi_isa_irq_penalty[irq];
 
-	penalty += acpi_irq_pci_sharing_penalty(irq);
-	return penalty;
+	return penalty + acpi_irq_pci_sharing_penalty(irq);
 }
 
 int __init acpi_irq_penalty_init(void)
@@ -881,6 +870,17 @@ bool acpi_isa_irq_available(int irq)
 		    acpi_irq_get_penalty(irq) < PIRQ_PENALTY_ISA_ALWAYS);
 }
 
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
+{
+	sci_irq = irq;
+
+	if (trigger == ACPI_MADT_TRIGGER_LEVEL &&
+	    polarity == ACPI_MADT_POLARITY_ACTIVE_LOW)
+		sci_penalty = PIRQ_PENALTY_PCI_USING;
+	else
+		sci_penalty = PIRQ_PENALTY_ISA_ALWAYS;
+}
+
 /*
  * Over-ride default table to reserve additional IRQs for use by ISA
  * e.g. acpi_irq_isa=5
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c5eaf2f..67d1d3e 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -318,6 +318,7 @@ struct pci_dev;
 int acpi_pci_irq_enable (struct pci_dev *dev);
 void acpi_penalize_isa_irq(int irq, int active);
 bool acpi_isa_irq_available(int irq);
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
 void acpi_pci_irq_disable (struct pci_dev *dev);
 
 extern int ec_read(u8 addr, u8 *val);
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 2/3] ACPI: pci_link: penalize SCI correctly
Date: Mon, 24 Oct 2016 00:31:31 -0400	[thread overview]
Message-ID: <1477283492-26657-3-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1477283492-26657-1-git-send-email-okaya@codeaurora.org>

Ondrej reported that IRQs stopped working in v4.7 on several
platforms.  A typical scenario, from Ondrej's VT82C694X/694X, is:

ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: No IRQ available for PCI Interrupt Link [LNKA]
8139too 0000:00:0f.0: PCI INT A: no GSI

We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already
active at IRQ 11. In that case, acpi_pci_link_allocate() only tries
to use the active IRQ (IRQ 11) which also happens to be the SCI.

We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but
irq_get_trigger_type(11) returns something other than
IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS
instead, which makes acpi_pci_link_allocate() assume the IRQ isn't
available and give up.

Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ,
trigger, and polarity directly and we don't have to depend on
irq_get_trigger_type().

Link: http://lkml.kernel.org/r/201609251512.05657.linux at rainbow-software.org
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 arch/x86/kernel/acpi/boot.c |  1 +
 drivers/acpi/pci_link.c     | 30 +++++++++++++++---------------
 include/linux/acpi.h        |  1 +
 3 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 90d84c3..0ffd26e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -453,6 +453,7 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
 		polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
 
 	mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+	acpi_penalize_sci_irq(bus_irq, trigger, polarity);
 
 	/*
 	 * stash over-ride to indicate we've been here
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 6229b02..74bf96e 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -87,6 +87,7 @@ struct acpi_pci_link {
 
 static LIST_HEAD(acpi_link_list);
 static DEFINE_MUTEX(acpi_link_lock);
+static int sci_irq = -1, sci_penalty;
 
 /* --------------------------------------------------------------------------
                             PCI Link Device Management
@@ -496,25 +497,13 @@ static int acpi_irq_get_penalty(int irq)
 {
 	int penalty = 0;
 
-	/*
-	* Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict
-	* with PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be
-	* use for PCI IRQs.
-	*/
-	if (irq == acpi_gbl_FADT.sci_interrupt) {
-		u32 type = irq_get_trigger_type(irq) & IRQ_TYPE_SENSE_MASK;
-
-		if (type != IRQ_TYPE_LEVEL_LOW)
-			penalty += PIRQ_PENALTY_ISA_ALWAYS;
-		else
-			penalty += PIRQ_PENALTY_PCI_USING;
-	}
+	if (irq == sci_irq)
+		penalty += sci_penalty;
 
 	if (irq < ACPI_MAX_ISA_IRQS)
 		return penalty + acpi_isa_irq_penalty[irq];
 
-	penalty += acpi_irq_pci_sharing_penalty(irq);
-	return penalty;
+	return penalty + acpi_irq_pci_sharing_penalty(irq);
 }
 
 int __init acpi_irq_penalty_init(void)
@@ -881,6 +870,17 @@ bool acpi_isa_irq_available(int irq)
 		    acpi_irq_get_penalty(irq) < PIRQ_PENALTY_ISA_ALWAYS);
 }
 
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
+{
+	sci_irq = irq;
+
+	if (trigger == ACPI_MADT_TRIGGER_LEVEL &&
+	    polarity == ACPI_MADT_POLARITY_ACTIVE_LOW)
+		sci_penalty = PIRQ_PENALTY_PCI_USING;
+	else
+		sci_penalty = PIRQ_PENALTY_ISA_ALWAYS;
+}
+
 /*
  * Over-ride default table to reserve additional IRQs for use by ISA
  * e.g. acpi_irq_isa=5
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c5eaf2f..67d1d3e 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -318,6 +318,7 @@ struct pci_dev;
 int acpi_pci_irq_enable (struct pci_dev *dev);
 void acpi_penalize_isa_irq(int irq, int active);
 bool acpi_isa_irq_available(int irq);
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
 void acpi_pci_irq_disable (struct pci_dev *dev);
 
 extern int ec_read(u8 addr, u8 *val);
-- 
1.9.1

  parent reply	other threads:[~2016-10-24  4:31 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-24  4:31 [PATCH V5 0/3] ACPI,PCI,IRQ: revert penalty calculation for ISA and SCI interrupts Sinan Kaya
2016-10-24  4:31 ` [PATCH V5 0/3] ACPI, PCI, IRQ: " Sinan Kaya
2016-10-24  4:31 ` [PATCH V5 1/3] ACPI, PCI, IRQ: assign ISA IRQ directly during early boot stages Sinan Kaya
2016-10-24  4:31   ` Sinan Kaya
2016-10-24  4:46   ` Jonathan Liu
2016-10-24  4:46     ` Jonathan Liu
2016-10-24  4:31 ` Sinan Kaya [this message]
2016-10-24  4:31   ` [PATCH V5 2/3] ACPI: pci_link: penalize SCI correctly Sinan Kaya
2016-10-24  4:46   ` Jonathan Liu
2016-10-24  4:46     ` Jonathan Liu
2016-10-24  4:31 ` [PATCH V5 3/3] ACPI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs Sinan Kaya
2016-10-24  4:31   ` Sinan Kaya
2016-10-24  4:46   ` Jonathan Liu
2016-10-24  4:46     ` Jonathan Liu
2016-10-26 18:34     ` Sinan Kaya
2016-10-26 18:34       ` Sinan Kaya
2016-10-27 10:31 ` [PATCH V5 0/3] ACPI,PCI,IRQ: revert penalty calculation for ISA and SCI interrupts Rafael J. Wysocki
2016-10-27 10:31   ` Rafael J. Wysocki
2016-10-27 10:31   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477283492-26657-3-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=alex.williamson@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=cov@codeaurora.org \
    --cc=hpa@zytor.com \
    --cc=jcm@redhat.com \
    --cc=len.brown@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    --cc=mingo@redhat.com \
    --cc=net147@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=ravikanth.nalla@hpe.com \
    --cc=rjw@rjwysocki.net \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wim@djo.tudelft.nl \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.