From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, carlo@caione.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes
Date: Mon, 31 Oct 2016 17:44:41 +0100 [thread overview]
Message-ID: <1477932286-27482-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1477932286-27482-1-git-send-email-narmstrong@baylibre.com>
Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index ce7f550..33d0506 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -42,6 +42,7 @@
*/
#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
@@ -214,3 +215,11 @@
};
};
};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes
Date: Mon, 31 Oct 2016 17:44:41 +0100 [thread overview]
Message-ID: <1477932286-27482-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1477932286-27482-1-git-send-email-narmstrong@baylibre.com>
Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index ce7f550..33d0506 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -42,6 +42,7 @@
*/
#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
@@ -214,3 +215,11 @@
};
};
};
+
+&hiubus {
+ clkc: clock-controller at 0 {
+ compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes
Date: Mon, 31 Oct 2016 17:44:41 +0100 [thread overview]
Message-ID: <1477932286-27482-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1477932286-27482-1-git-send-email-narmstrong@baylibre.com>
Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index ce7f550..33d0506 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -42,6 +42,7 @@
*/
#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
@@ -214,3 +215,11 @@
};
};
};
+
+&hiubus {
+ clkc: clock-controller at 0 {
+ compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2016-10-31 16:45 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` [PATCH 1/8] ARM64: dts: meson-gxbb: Move common nodes to meson-gx Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-11-07 22:30 ` Kevin Hilman
2016-11-07 22:30 ` Kevin Hilman
2016-11-07 22:30 ` Kevin Hilman
2016-10-31 16:44 ` Neil Armstrong [this message]
2016-10-31 16:44 ` [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` [PATCH 4/8] ARM64: dts: meson-gxl: Add i2c nodes Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` [PATCH 5/8] ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` [PATCH 6/8] ARM64: dts: meson-gxl-p23x: Add uart pinctrl Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-11-05 22:10 ` Kevin Hilman
2016-11-05 22:10 ` Kevin Hilman
2016-11-05 22:10 ` Kevin Hilman
2016-11-05 22:10 ` Kevin Hilman
2016-10-31 16:44 ` [PATCH 8/8] ARM64: dts: meson-gxl-p23x: Enable IR receiver Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
2016-10-31 16:44 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477932286-27482-4-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.