From: Caesar Wang <wxt@rock-chips.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: eddie.cai@rock-chips.com, tfiga@chromium.org,
Yakir Yang <ykk@rock-chips.com>, Caesar Wang <wxt@rock-chips.com>,
Douglas Anderson <dianders@chromium.org>,
David Wu <david.wu@rock-chips.com>,
Jianqun Xu <jay.xu@rock-chips.com>,
devicetree@vger.kernel.org,
Brian Norris <briannorris@chromium.org>,
linux-kernel@vger.kernel.org,
zhangqing <zhangqing@rock-chips.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Rob Herring <robh+dt@kernel.org>,
Will Deacon <will.deacon@arm.com>,
linux-rockchip@lists.infradead.org,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/9] arm64: dts: rockchip: introduce pclk_vio_grf in eDP device node
Date: Wed, 9 Nov 2016 21:21:58 +0800 [thread overview]
Message-ID: <1478697721-2323-7-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1478697721-2323-1-git-send-email-wxt@rock-chips.com>
From: Yakir Yang <ykk@rock-chips.com>
The pclk_vio_grf supply power for VIO GRF IOs, if it is disabled, driver
would failed to operate the VIO GRF registers.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
Changes in v2: None
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 6544910..74deb44 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1356,8 +1356,8 @@
compatible = "rockchip,rk3399-edp";
reg = <0x0 0xff970000 0x0 0x8000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
- clock-names = "dp", "pclk";
+ clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+ clock-names = "dp", "pclk", "grf";
resets = <&cru SRST_P_EDP_CTRL>;
reset-names = "dp";
rockchip,grf = <&grf>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: wxt@rock-chips.com (Caesar Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/9] arm64: dts: rockchip: introduce pclk_vio_grf in eDP device node
Date: Wed, 9 Nov 2016 21:21:58 +0800 [thread overview]
Message-ID: <1478697721-2323-7-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1478697721-2323-1-git-send-email-wxt@rock-chips.com>
From: Yakir Yang <ykk@rock-chips.com>
The pclk_vio_grf supply power for VIO GRF IOs, if it is disabled, driver
would failed to operate the VIO GRF registers.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
Changes in v2: None
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 6544910..74deb44 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1356,8 +1356,8 @@
compatible = "rockchip,rk3399-edp";
reg = <0x0 0xff970000 0x0 0x8000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
- clock-names = "dp", "pclk";
+ clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+ clock-names = "dp", "pclk", "grf";
resets = <&cru SRST_P_EDP_CTRL>;
reset-names = "dp";
rockchip,grf = <&grf>;
--
2.7.4
next prev parent reply other threads:[~2016-11-09 13:24 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-09 13:21 [PATCH v2 0/9] rockchip: add more power domain and devices dts for rk3399 Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-09 13:21 ` [PATCH v2 1/9] arm64: dts: rockchip: add eMMC's power domain support " Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-12 4:22 ` Shawn Lin
2016-11-12 4:22 ` Shawn Lin
2016-11-12 4:22 ` Shawn Lin
2016-11-14 15:05 ` Caesar Wang
2016-11-14 15:05 ` Caesar Wang
2016-11-14 15:05 ` Caesar Wang
2016-11-14 14:45 ` Heiko Stuebner
2016-11-14 14:45 ` Heiko Stuebner
2016-11-14 14:45 ` Heiko Stuebner
2016-11-14 15:01 ` Caesar Wang
2016-11-14 15:01 ` Caesar Wang
2016-11-14 15:01 ` Caesar Wang
2016-11-14 15:26 ` Heiko Stuebner
2016-11-14 15:26 ` Heiko Stuebner
2016-11-09 13:21 ` [PATCH v2 2/9] arm64: dts: rockchip: add pd_sd power node " Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-12 4:35 ` Shawn Lin
2016-11-12 4:35 ` Shawn Lin
2016-11-12 4:35 ` Shawn Lin
2016-11-14 15:27 ` Heiko Stuebner
2016-11-14 15:27 ` Heiko Stuebner
2016-11-14 15:27 ` Heiko Stuebner
2016-11-09 13:21 ` [PATCH v2 3/9] arm64: dts: rockchip: add VOP and VOP iommu " Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-14 16:05 ` Heiko Stuebner
2016-11-14 16:05 ` Heiko Stuebner
2016-11-14 16:05 ` Heiko Stuebner
2016-11-21 2:55 ` Caesar Wang
2016-11-21 2:55 ` Caesar Wang
2016-11-09 13:21 ` [PATCH v2 4/9] arm64: dts: rockchip: add eDP device " Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-09 13:21 ` [PATCH v2 5/9] arm64: dts: rockchip: add backlight support for rk3399 evb board Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-14 14:53 ` Heiko Stuebner
2016-11-14 14:53 ` Heiko Stuebner
2016-11-14 14:53 ` Heiko Stuebner
2016-11-09 13:21 ` Caesar Wang [this message]
2016-11-09 13:21 ` [PATCH v2 6/9] arm64: dts: rockchip: introduce pclk_vio_grf in eDP device node Caesar Wang
2016-11-09 13:21 ` [PATCH v2 7/9] arm64: dts: rockchip: add pd_edp node for rk3399 Caesar Wang
2016-11-09 13:21 ` Caesar Wang
2016-11-14 17:26 ` Doug Anderson
2016-11-14 17:26 ` Doug Anderson
2016-11-14 17:26 ` Doug Anderson
2016-11-09 13:22 ` [PATCH v2 8/9] arm64: dts: rockchip: support dwc3 USB " Caesar Wang
2016-11-09 13:22 ` Caesar Wang
2016-11-09 13:22 ` Caesar Wang
2016-11-30 22:28 ` Brian Norris
2016-11-30 22:28 ` Brian Norris
2016-11-30 22:28 ` Brian Norris
2016-11-09 13:22 ` [PATCH v2 9/9] arm64: dts: rockchip: add the usb3 pd " Caesar Wang
2016-11-09 13:22 ` Caesar Wang
2016-11-21 2:17 ` [PATCH v2.1 7/9] arm64: dts: rockchip: add pd_edp node " Caesar Wang
2016-11-21 2:17 ` Caesar Wang
2016-11-21 2:17 ` Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478697721-2323-7-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=briannorris@chromium.org \
--cc=catalin.marinas@arm.com \
--cc=david.wu@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=eddie.cai@rock-chips.com \
--cc=heiko@sntech.de \
--cc=jay.xu@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=tfiga@chromium.org \
--cc=will.deacon@arm.com \
--cc=ykk@rock-chips.com \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.