[PATCH] drm/i915: Only poll DW3_A when init DDI PHY for ports B and C.

[Rodrigo Vivi <rodrigo.vivi@intel.com>]

According to Bspec we need to
"Poll for PORT_REF_DW3_A grc_done == 1b"
only on ports B and C initialization sequence when
copying rcomp from port A.

So let's follow the spec and only poll for that case
and not on every port A initialization.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/intel_dpio_phy.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
index 7a8e82d..277b1aa 100644
--- a/drivers/gpu/drm/i915/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -367,6 +367,9 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
 
 	if (phy_info->rcomp_phy != -1) {
 		uint32_t grc_code;
+
+		bxt_phy_wait_grc_done(dev_priv, phy_info->rcomp_phy);
+
 		/*
 		 * PHY0 isn't connected to an RCOMP resistor so copy over
 		 * the corresponding calibrated value from PHY1, and disable
@@ -387,10 +390,6 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
 	val = I915_READ(BXT_PHY_CTL_FAMILY(phy));
 	val |= COMMON_RESET_DIS;
 	I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val);
-
-	if (phy_info->rcomp_phy == -1)
-		bxt_phy_wait_grc_done(dev_priv, phy);
-
 }
 
 void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy)
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx