All of lore.kernel.org
 help / color / mirror / Atom feed
From: ville.syrjala@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Cc: Daniel Otero <daniel.otero@outlook.com>, stable@vger.kernel.org
Subject: [PATCH] drm/i915: Assuming non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT
Date: Fri, 11 Nov 2016 19:14:24 +0200	[thread overview]
Message-ID: <1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com> (raw)

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT
port information apparently didn't survive the reality of buggy VBTs.
In this particular case we have a machine with a natice HDMI port, but
the VBT telsl us it's a DP++ port based on its capabilities.

The dvo_port information in VBT does claim that we're dealing with a
HDMI port though, but we have other machines which do the same even
when they actually have DP++ ports. So that piece of information alone
isn't sufficient to tell the two apart.

After staring at a bunch of VBTs from various machines, I have to
conclude that the only other semi-reliable clue we can use is the
presence of the AUX channel in the VBT. On this particular machine
AUX channel is specified as zero, whereas on some of the other machines
which listed the DP++ port as HDMI have a non-zero AUX channel.

I've also seen VBTs which have dvo_port a DP but have a zero AUX
channel. I believe those we need to treat as DP ports, so we'll limit
the AUX channel check to just the cases where dvo_port is HDMI.

If we encounter any more serious failures with this heuristic I think
we'll have to have to throw it out entirely. But that could mean that
there is a risk of type 1 DVI dongle users getting greeted by a
black screen, so I'd rather not go there unless absolutely necessary.

Cc: Daniel Otero <daniel.otero@outlook.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Otero <daniel.otero@outlook.com>
Fixes: d61992565bd3 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_bios.c     | 32 ++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/intel_vbt_defs.h |  3 ++-
 2 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 5ab646ef8c9f..33ed05186810 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -1147,7 +1147,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 	if (!child)
 		return;
 
-	aux_channel = child->raw[25];
+	aux_channel = child->common.aux_channel;
 	ddc_pin = child->common.ddc_pin;
 
 	is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
@@ -1677,7 +1677,8 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 	return false;
 }
 
-bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port)
+static bool child_dev_is_dp_dual_mode(const union child_device_config *p_child,
+				      enum port port)
 {
 	static const struct {
 		u16 dp, hdmi;
@@ -1691,22 +1692,37 @@ bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum por
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
 	};
-	int i;
 
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
 		return false;
 
-	if (!dev_priv->vbt.child_dev_num)
+	if ((p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) !=
+	    (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
+		return false;
+
+	if (p_child->common.dvo_port == port_mapping[port].dp)
+		return true;
+
+	/* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */
+	if (p_child->common.dvo_port == port_mapping[port].hdmi &&
+	    p_child->common.aux_channel != 0)
+		return true;
+
+	return false;
+}
+
+bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port)
+{
+	int i;
+
+	if (port == PORT_A)
 		return false;
 
 	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
 		const union child_device_config *p_child =
 			&dev_priv->vbt.child_dev[i];
 
-		if ((p_child->common.dvo_port == port_mapping[port].dp ||
-		     p_child->common.dvo_port == port_mapping[port].hdmi) &&
-		    (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) ==
-		    (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
+		if (child_dev_is_dp_dual_mode(p_child, port))
 			return true;
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h
index 68db9621f1f0..8886cab19f98 100644
--- a/drivers/gpu/drm/i915/intel_vbt_defs.h
+++ b/drivers/gpu/drm/i915/intel_vbt_defs.h
@@ -280,7 +280,8 @@ struct common_child_dev_config {
 	u8 dp_support:1;
 	u8 tmds_support:1;
 	u8 support_reserved:5;
-	u8 not_common3[12];
+	u8 aux_channel;
+	u8 not_common3[11];
 	u8 iboost_level;
 } __packed;
 
-- 
2.7.4


             reply	other threads:[~2016-11-11 17:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-11 17:14 ville.syrjala [this message]
2016-11-11 17:46 ` ✓ Fi.CI.BAT: success for drm/i915: Assuming non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT Patchwork
2016-11-14  7:15 ` [Intel-gfx] [PATCH] " Daniel Vetter
2016-11-14  7:15   ` Daniel Vetter
2016-11-14 15:34   ` Ville Syrjälä
2016-11-14 15:34     ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=daniel.otero@outlook.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.