From: Andy Yan <andy.yan@rock-chips.com> To: heiko@sntech.de Cc: linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, Andy Yan <andy.yan@rock-chips.com> Subject: [PATCH v2 07/10] ARM: add low level debug uart for rk1108 Date: Mon, 14 Nov 2016 20:12:35 +0800 [thread overview] Message-ID: <1479125555-24465-1-git-send-email-andy.yan@rock-chips.com> (raw) In-Reply-To: <1479124550-24037-1-git-send-email-andy.yan@rock-chips.com> RK1108 UARTs are Synopsis DesignWare 8250 compatible. Only with different register addresses. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> --- Changes in v2: None arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d83f7c3..408540f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -776,6 +776,30 @@ choice their output to the standard serial port on the RealView PB1176 platform. + config DEBUG_RK1108_UART0 + bool "Kernel low-level debugging messages via Rockchip RK1108 UART0" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK1108 based platforms. + + config DEBUG_RK1108_UART1 + bool "Kernel low-level debugging messages via Rockchip RK1108 UART1" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK1108 based platforms. + + config DEBUG_RK1108_UART2 + bool "Kernel low-level debugging messages via Rockchip RK1108 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK1108 based platforms. + config DEBUG_RK29_UART0 bool "Kernel low-level debugging messages via Rockchip RK29 UART0" depends on ARCH_ROCKCHIP @@ -1465,6 +1489,9 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if DEBUG_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x10210000 if DEBUG_RK1108_UART2 + default 0x10220000 if DEBUG_RK1108_UART1 + default 0x10230000 if DEBUG_RK1108_UART0 default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 @@ -1563,6 +1590,9 @@ config DEBUG_UART_PHYS config DEBUG_UART_VIRT hex "Virtual base address of debug UART" + default 0xc881f000 if DEBUG_RK1108_UART2 + default 0xc8821000 if DEBUG_RK1108_UART1 + default 0xc8912000 if DEBUG_RK1108_UART0 default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: andy.yan@rock-chips.com (Andy Yan) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 07/10] ARM: add low level debug uart for rk1108 Date: Mon, 14 Nov 2016 20:12:35 +0800 [thread overview] Message-ID: <1479125555-24465-1-git-send-email-andy.yan@rock-chips.com> (raw) In-Reply-To: <1479124550-24037-1-git-send-email-andy.yan@rock-chips.com> RK1108 UARTs are Synopsis DesignWare 8250 compatible. Only with different register addresses. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> --- Changes in v2: None arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d83f7c3..408540f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -776,6 +776,30 @@ choice their output to the standard serial port on the RealView PB1176 platform. + config DEBUG_RK1108_UART0 + bool "Kernel low-level debugging messages via Rockchip RK1108 UART0" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK1108 based platforms. + + config DEBUG_RK1108_UART1 + bool "Kernel low-level debugging messages via Rockchip RK1108 UART1" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK1108 based platforms. + + config DEBUG_RK1108_UART2 + bool "Kernel low-level debugging messages via Rockchip RK1108 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK1108 based platforms. + config DEBUG_RK29_UART0 bool "Kernel low-level debugging messages via Rockchip RK29 UART0" depends on ARCH_ROCKCHIP @@ -1465,6 +1489,9 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if DEBUG_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x10210000 if DEBUG_RK1108_UART2 + default 0x10220000 if DEBUG_RK1108_UART1 + default 0x10230000 if DEBUG_RK1108_UART0 default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 @@ -1563,6 +1590,9 @@ config DEBUG_UART_PHYS config DEBUG_UART_VIRT hex "Virtual base address of debug UART" + default 0xc881f000 if DEBUG_RK1108_UART2 + default 0xc8821000 if DEBUG_RK1108_UART1 + default 0xc8912000 if DEBUG_RK1108_UART0 default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 -- 2.7.4
next prev parent reply other threads:[~2016-11-14 12:12 UTC|newest] Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-14 11:55 [PATCH v2 00/10] Add basic support for Rockchip RK1108 SOC Andy Yan 2016-11-14 11:55 ` Andy Yan 2016-11-14 12:01 ` [PATCH v2 01/10] dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description Andy Yan 2016-11-14 12:01 ` Andy Yan 2016-11-14 23:09 ` Heiko Stuebner 2016-11-14 12:03 ` [PATCH v2 02/10] dt-bindings: add documentation for rk1108 cru Andy Yan 2016-11-14 12:03 ` Andy Yan 2016-11-15 9:35 ` Heiko Stuebner 2016-11-15 9:35 ` Heiko Stuebner 2016-11-16 0:44 ` Shawn Lin 2016-11-14 12:04 ` [PATCH v2 03/10] clk: rockchip: add dt-binding header for rk1108 Andy Yan 2016-11-14 12:04 ` Andy Yan 2016-11-15 9:41 ` Heiko Stuebner 2016-11-15 9:41 ` Heiko Stuebner 2016-11-16 0:40 ` Shawn Lin 2016-11-16 0:40 ` Shawn Lin 2016-11-14 12:07 ` [PATCH v2 04/10] clk: rockchip: add clock controller " Andy Yan 2016-11-14 12:07 ` Andy Yan 2016-11-15 10:32 ` Heiko Stuebner 2016-11-15 10:32 ` Heiko Stuebner 2016-11-14 12:09 ` [PATCH v2 05/10] dt-bindings: add documentation for rk1108 pinctrl Andy Yan 2016-11-14 23:13 ` Heiko Stuebner 2016-11-15 9:36 ` Linus Walleij 2016-11-14 12:10 ` [PATCH v2 06/10] pinctrl: rockchip: add support for rk1108 Andy Yan 2016-11-14 23:23 ` Heiko Stuebner [not found] ` <1479125447-24406-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org> 2016-11-15 9:37 ` Linus Walleij 2016-11-15 9:37 ` Linus Walleij 2016-11-14 12:12 ` Andy Yan [this message] 2016-11-14 12:12 ` [PATCH v2 07/10] ARM: add low level debug uart " Andy Yan 2016-11-15 11:32 ` Heiko Stuebner 2016-11-15 11:32 ` Heiko Stuebner 2016-11-15 11:32 ` Heiko Stuebner 2016-11-14 12:14 ` [PATCH v2 08/10] ARM: dts: add basic support for Rockchip RK1108 SOC Andy Yan 2016-11-14 12:14 ` Andy Yan 2016-11-15 11:45 ` Heiko Stuebner 2016-11-15 11:45 ` Heiko Stuebner 2016-11-16 11:53 ` Heiko Stuebner 2016-11-16 11:53 ` Heiko Stuebner 2016-11-14 12:15 ` [PATCH v2 09/10] ARM: rockchip: enable support for RK1108 SoC Andy Yan 2016-11-15 11:33 ` Heiko Stuebner 2016-11-14 12:17 ` [PATCH v2 10/10] ARM: dts: rockchip: add rockchip RK1108 Evaluation board Andy Yan 2016-11-14 12:17 ` Andy Yan 2016-11-16 11:59 ` Heiko Stuebner 2016-11-16 11:59 ` Heiko Stuebner 2016-11-16 11:59 ` Heiko Stuebner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1479125555-24465-1-git-send-email-andy.yan@rock-chips.com \ --to=andy.yan@rock-chips.com \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux@armlinux.org.uk \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.