All of lore.kernel.org
 help / color / mirror / Atom feed
From: <c_traja@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <tamizhchelvam@codeaurora.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<robh@kernel.org>, Tamizh chelvam <c_traja@qti.qualcomm.com>
Subject: [PATCHv2 2/4] ath10k: Add support to update btcoex priority value via nl80211
Date: Thu, 17 Nov 2016 17:14:22 +0530	[thread overview]
Message-ID: <1479383064-25718-3-git-send-email-c_traja@qti.qualcomm.com> (raw)
In-Reply-To: <1479383064-25718-1-git-send-email-c_traja@qti.qualcomm.com>

From: Tamizh chelvam <c_traja@qti.qualcomm.com>

This patch adds support to update btcoex priority value via nl80211.
Here driver will be exposing the supported frame format for this
feature via btcoex_support_flags which is a member of
wiphy structure. 10.4 based firmware support this feature.
WMI service WMI_SERVICE_BTCOEX is used to identify the firmware support
of this feature. BTCOEX needs to enable to modify this value.

This patch has dependency of
"cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX"
patch.

Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     |   78 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |   19 +++++++
 drivers/net/wireless/ath/ath10k/wmi.c     |   19 +++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   18 +++++++
 4 files changed, 134 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e7131b9..ce5d529 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7502,6 +7502,71 @@ static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
 	return ret;
 }
 
+u32
+ath10k_mac_get_btcoex_prio(struct cfg80211_btcoex_priority *btcoex_priority)
+{
+	u32 btcoex_prio = 0;
+
+	if (btcoex_priority->wlan_be_preferred)
+		btcoex_prio |= WIPHY_WLAN_BE_PREFERRED;
+
+	if (btcoex_priority->wlan_bk_preferred)
+		btcoex_prio |= WIPHY_WLAN_BK_PREFERRED;
+
+	if (btcoex_priority->wlan_vi_preferred)
+		btcoex_prio |= WIPHY_WLAN_VI_PREFERRED;
+
+	if (btcoex_priority->wlan_vo_preferred)
+		btcoex_prio |= WIPHY_WLAN_VO_PREFERRED;
+
+	if (btcoex_priority->wlan_beacon_preferred)
+		btcoex_prio |= WIPHY_WLAN_BEACON_PREFERRED;
+
+	if (btcoex_priority->wlan_mgmt_preferred)
+		btcoex_prio |= WIPHY_WLAN_MGMT_PREFERRED;
+
+	return btcoex_prio;
+}
+
+static int ath10k_mac_op_set_btcoex_priority(struct ieee80211_hw *hw,
+			struct cfg80211_btcoex_priority *btcoex_priority)
+{
+	u32 btcoex_prio;
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags))) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->state != ATH10K_STATE_ON &&
+	    ar->state != ATH10K_STATE_RESTARTED) {
+		ret = -ENETDOWN;
+		goto exit;
+	}
+
+	btcoex_prio = ath10k_mac_get_btcoex_prio(btcoex_priority);
+
+	if (btcoex_prio > 0x3f) {
+		ret = -E2BIG;
+		goto exit;
+	}
+
+	ret = ath10k_wmi_set_coex_param(ar, btcoex_prio);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to set btcoex priority: %d\n", ret);
+		goto exit;
+	}
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_mac_op_tx,
 	.wake_tx_queue			= ath10k_mac_op_wake_tx_queue,
@@ -7544,6 +7609,7 @@ static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
 	.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
 	.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
 	.set_btcoex                     = ath10k_mac_op_set_btcoex,
+	.set_btcoex_priority		= ath10k_mac_op_set_btcoex_priority,
 
 	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
 
@@ -8134,6 +8200,18 @@ int ath10k_mac_register(struct ath10k *ar)
 	 */
 	ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;
 
+	if (test_bit(WMI_SERVICE_BTCOEX, ar->wmi.svc_map)) {
+		ar->hw->wiphy->btcoex_support_flags =
+			WIPHY_WLAN_BE_PREFERRED |
+			WIPHY_WLAN_BK_PREFERRED |
+			WIPHY_WLAN_VI_PREFERRED |
+			WIPHY_WLAN_VO_PREFERRED |
+			WIPHY_WLAN_BEACON_PREFERRED |
+			WIPHY_WLAN_MGMT_PREFERRED;
+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "btcoex supported mask :%u\n",
+			   ar->hw->wiphy->btcoex_support_flags);
+	}
+
 	switch (ar->running_fw->fw_file.wmi_op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index c9a8bb1..90c8390 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -197,6 +197,8 @@ struct wmi_ops {
 					(struct ath10k *ar,
 					 enum wmi_bss_survey_req_type type);
 	struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
+	struct sk_buff *(*gen_set_coex_param)(struct ath10k *ar,
+					      u32 btcoex_prio);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1411,4 +1413,21 @@ struct wmi_ops {
 	return ath10k_wmi_cmd_send(ar, skb, wmi->cmd->echo_cmdid);
 }
 
+static inline int
+ath10k_wmi_set_coex_param(struct ath10k *ar, u32 btcoex_prio)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_set_coex_param)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_set_coex_param(ar, btcoex_prio);
+
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->set_coex_param_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 387c4ee..de35c17 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -710,6 +710,7 @@
 	.pdev_bss_chan_info_request_cmdid =
 			WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
 	.ext_resource_cfg_cmdid = WMI_10_4_EXT_RESOURCE_CFG_CMDID,
+	.set_coex_param_cmdid = WMI_10_4_BTCOEX_CFG_CMDID,
 };
 
 /* MAIN WMI VDEV param map */
@@ -7859,6 +7860,23 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	return 0;
 }
 
+static struct sk_buff *
+ath10k_wmi_10_4_op_gen_set_coex_param(struct ath10k *ar,
+				      u32 btcoex_prio)
+{
+	struct wmi_set_coex_param_10_4_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_set_coex_param_10_4_cmd *)skb->data;
+	cmd->btcoex_prio = __cpu_to_le32(btcoex_prio);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "BTCOEX priority :%u\n", btcoex_prio);
+	return skb;
+}
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -8205,6 +8223,7 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
 	.gen_echo = ath10k_wmi_op_gen_echo,
 	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
+	.gen_set_coex_param = ath10k_wmi_10_4_op_gen_set_coex_param,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1b243c8..3a739e3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -184,6 +184,8 @@ enum wmi_service {
 	WMI_SERVICE_TX_MODE_PUSH_ONLY,
 	WMI_SERVICE_TX_MODE_PUSH_PULL,
 	WMI_SERVICE_TX_MODE_DYNAMIC,
+	WMI_SERVICE_VDEV_RX_FILTER,
+	WMI_SERVICE_BTCOEX,
 
 	/* keep last */
 	WMI_SERVICE_MAX,
@@ -310,6 +312,8 @@ enum wmi_10_4_service {
 	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
+	WMI_10_4_SERVICE_VDEV_RX_FILTER,
+	WMI_10_4_SERVICE_BTCOEX,
 };
 
 static inline char *wmi_service_name(int service_id)
@@ -408,6 +412,7 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
+	SVCSTR(WMI_SERVICE_BTCOEX);
 	default:
 		return NULL;
 	}
@@ -663,6 +668,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 	       WMI_SERVICE_TX_MODE_DYNAMIC, len);
+	SVCMAP(WMI_10_4_SERVICE_BTCOEX,
+	       WMI_SERVICE_BTCOEX, len);
 }
 
 #undef SVCMAP
@@ -837,6 +844,7 @@ struct wmi_cmd_map {
 	u32 pdev_bss_chan_info_request_cmdid;
 	u32 pdev_enable_adaptive_cca_cmdid;
 	u32 ext_resource_cfg_cmdid;
+	u32 set_coex_param_cmdid;
 };
 
 /*
@@ -1646,6 +1654,11 @@ enum wmi_10_4_cmd_id {
 	WMI_10_4_EXT_RESOURCE_CFG_CMDID,
 	WMI_10_4_VDEV_SET_IE_CMDID,
 	WMI_10_4_SET_LTEU_CONFIG_CMDID,
+	WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
+	WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
+	WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
+	WMI_10_4_PEER_BWF_REQUEST_CMDID,
+	WMI_10_4_BTCOEX_CFG_CMDID,
 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
 };
 
@@ -2723,6 +2736,11 @@ struct wmi_ext_resource_config_10_4_cmd {
 	__le32 fw_feature_bitmap;
 };
 
+struct wmi_set_coex_param_10_4_cmd {
+	/* contains wlan priority frame type value preferred over bt */
+	__le32 btcoex_prio;
+};
+
 /* strucutre describing host memory chunk. */
 struct host_memory_chunk {
 	/* id of the request that is passed up in service ready */
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <c_traja@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: robh@kernel.org, devicetree@vger.kernel.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	Tamizh chelvam <c_traja@qti.qualcomm.com>,
	tamizhchelvam@codeaurora.org
Subject: [PATCHv2 2/4] ath10k: Add support to update btcoex priority value via nl80211
Date: Thu, 17 Nov 2016 17:14:22 +0530	[thread overview]
Message-ID: <1479383064-25718-3-git-send-email-c_traja@qti.qualcomm.com> (raw)
In-Reply-To: <1479383064-25718-1-git-send-email-c_traja@qti.qualcomm.com>

From: Tamizh chelvam <c_traja@qti.qualcomm.com>

This patch adds support to update btcoex priority value via nl80211.
Here driver will be exposing the supported frame format for this
feature via btcoex_support_flags which is a member of
wiphy structure. 10.4 based firmware support this feature.
WMI service WMI_SERVICE_BTCOEX is used to identify the firmware support
of this feature. BTCOEX needs to enable to modify this value.

This patch has dependency of
"cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX"
patch.

Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     |   78 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |   19 +++++++
 drivers/net/wireless/ath/ath10k/wmi.c     |   19 +++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   18 +++++++
 4 files changed, 134 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e7131b9..ce5d529 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7502,6 +7502,71 @@ static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
 	return ret;
 }
 
+u32
+ath10k_mac_get_btcoex_prio(struct cfg80211_btcoex_priority *btcoex_priority)
+{
+	u32 btcoex_prio = 0;
+
+	if (btcoex_priority->wlan_be_preferred)
+		btcoex_prio |= WIPHY_WLAN_BE_PREFERRED;
+
+	if (btcoex_priority->wlan_bk_preferred)
+		btcoex_prio |= WIPHY_WLAN_BK_PREFERRED;
+
+	if (btcoex_priority->wlan_vi_preferred)
+		btcoex_prio |= WIPHY_WLAN_VI_PREFERRED;
+
+	if (btcoex_priority->wlan_vo_preferred)
+		btcoex_prio |= WIPHY_WLAN_VO_PREFERRED;
+
+	if (btcoex_priority->wlan_beacon_preferred)
+		btcoex_prio |= WIPHY_WLAN_BEACON_PREFERRED;
+
+	if (btcoex_priority->wlan_mgmt_preferred)
+		btcoex_prio |= WIPHY_WLAN_MGMT_PREFERRED;
+
+	return btcoex_prio;
+}
+
+static int ath10k_mac_op_set_btcoex_priority(struct ieee80211_hw *hw,
+			struct cfg80211_btcoex_priority *btcoex_priority)
+{
+	u32 btcoex_prio;
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags))) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->state != ATH10K_STATE_ON &&
+	    ar->state != ATH10K_STATE_RESTARTED) {
+		ret = -ENETDOWN;
+		goto exit;
+	}
+
+	btcoex_prio = ath10k_mac_get_btcoex_prio(btcoex_priority);
+
+	if (btcoex_prio > 0x3f) {
+		ret = -E2BIG;
+		goto exit;
+	}
+
+	ret = ath10k_wmi_set_coex_param(ar, btcoex_prio);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to set btcoex priority: %d\n", ret);
+		goto exit;
+	}
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_mac_op_tx,
 	.wake_tx_queue			= ath10k_mac_op_wake_tx_queue,
@@ -7544,6 +7609,7 @@ static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
 	.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
 	.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
 	.set_btcoex                     = ath10k_mac_op_set_btcoex,
+	.set_btcoex_priority		= ath10k_mac_op_set_btcoex_priority,
 
 	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
 
@@ -8134,6 +8200,18 @@ int ath10k_mac_register(struct ath10k *ar)
 	 */
 	ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;
 
+	if (test_bit(WMI_SERVICE_BTCOEX, ar->wmi.svc_map)) {
+		ar->hw->wiphy->btcoex_support_flags =
+			WIPHY_WLAN_BE_PREFERRED |
+			WIPHY_WLAN_BK_PREFERRED |
+			WIPHY_WLAN_VI_PREFERRED |
+			WIPHY_WLAN_VO_PREFERRED |
+			WIPHY_WLAN_BEACON_PREFERRED |
+			WIPHY_WLAN_MGMT_PREFERRED;
+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "btcoex supported mask :%u\n",
+			   ar->hw->wiphy->btcoex_support_flags);
+	}
+
 	switch (ar->running_fw->fw_file.wmi_op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index c9a8bb1..90c8390 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -197,6 +197,8 @@ struct wmi_ops {
 					(struct ath10k *ar,
 					 enum wmi_bss_survey_req_type type);
 	struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
+	struct sk_buff *(*gen_set_coex_param)(struct ath10k *ar,
+					      u32 btcoex_prio);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1411,4 +1413,21 @@ struct wmi_ops {
 	return ath10k_wmi_cmd_send(ar, skb, wmi->cmd->echo_cmdid);
 }
 
+static inline int
+ath10k_wmi_set_coex_param(struct ath10k *ar, u32 btcoex_prio)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_set_coex_param)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_set_coex_param(ar, btcoex_prio);
+
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->set_coex_param_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 387c4ee..de35c17 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -710,6 +710,7 @@
 	.pdev_bss_chan_info_request_cmdid =
 			WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
 	.ext_resource_cfg_cmdid = WMI_10_4_EXT_RESOURCE_CFG_CMDID,
+	.set_coex_param_cmdid = WMI_10_4_BTCOEX_CFG_CMDID,
 };
 
 /* MAIN WMI VDEV param map */
@@ -7859,6 +7860,23 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	return 0;
 }
 
+static struct sk_buff *
+ath10k_wmi_10_4_op_gen_set_coex_param(struct ath10k *ar,
+				      u32 btcoex_prio)
+{
+	struct wmi_set_coex_param_10_4_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_set_coex_param_10_4_cmd *)skb->data;
+	cmd->btcoex_prio = __cpu_to_le32(btcoex_prio);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "BTCOEX priority :%u\n", btcoex_prio);
+	return skb;
+}
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -8205,6 +8223,7 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
 	.gen_echo = ath10k_wmi_op_gen_echo,
 	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
+	.gen_set_coex_param = ath10k_wmi_10_4_op_gen_set_coex_param,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1b243c8..3a739e3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -184,6 +184,8 @@ enum wmi_service {
 	WMI_SERVICE_TX_MODE_PUSH_ONLY,
 	WMI_SERVICE_TX_MODE_PUSH_PULL,
 	WMI_SERVICE_TX_MODE_DYNAMIC,
+	WMI_SERVICE_VDEV_RX_FILTER,
+	WMI_SERVICE_BTCOEX,
 
 	/* keep last */
 	WMI_SERVICE_MAX,
@@ -310,6 +312,8 @@ enum wmi_10_4_service {
 	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
+	WMI_10_4_SERVICE_VDEV_RX_FILTER,
+	WMI_10_4_SERVICE_BTCOEX,
 };
 
 static inline char *wmi_service_name(int service_id)
@@ -408,6 +412,7 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
+	SVCSTR(WMI_SERVICE_BTCOEX);
 	default:
 		return NULL;
 	}
@@ -663,6 +668,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 	       WMI_SERVICE_TX_MODE_DYNAMIC, len);
+	SVCMAP(WMI_10_4_SERVICE_BTCOEX,
+	       WMI_SERVICE_BTCOEX, len);
 }
 
 #undef SVCMAP
@@ -837,6 +844,7 @@ struct wmi_cmd_map {
 	u32 pdev_bss_chan_info_request_cmdid;
 	u32 pdev_enable_adaptive_cca_cmdid;
 	u32 ext_resource_cfg_cmdid;
+	u32 set_coex_param_cmdid;
 };
 
 /*
@@ -1646,6 +1654,11 @@ enum wmi_10_4_cmd_id {
 	WMI_10_4_EXT_RESOURCE_CFG_CMDID,
 	WMI_10_4_VDEV_SET_IE_CMDID,
 	WMI_10_4_SET_LTEU_CONFIG_CMDID,
+	WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
+	WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
+	WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
+	WMI_10_4_PEER_BWF_REQUEST_CMDID,
+	WMI_10_4_BTCOEX_CFG_CMDID,
 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
 };
 
@@ -2723,6 +2736,11 @@ struct wmi_ext_resource_config_10_4_cmd {
 	__le32 fw_feature_bitmap;
 };
 
+struct wmi_set_coex_param_10_4_cmd {
+	/* contains wlan priority frame type value preferred over bt */
+	__le32 btcoex_prio;
+};
+
 /* strucutre describing host memory chunk. */
 struct host_memory_chunk {
 	/* id of the request that is passed up in service ready */
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <c_traja@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: robh@kernel.org, devicetree@vger.kernel.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	Tamizh chelvam <c_traja@qti.qualcomm.com>,
	tamizhchelvam@codeaurora.org
Subject: [PATCHv2 2/4] ath10k: Add support to update btcoex priority value via nl80211
Date: Thu, 17 Nov 2016 17:14:22 +0530	[thread overview]
Message-ID: <1479383064-25718-3-git-send-email-c_traja@qti.qualcomm.com> (raw)
In-Reply-To: <1479383064-25718-1-git-send-email-c_traja@qti.qualcomm.com>

From: Tamizh chelvam <c_traja@qti.qualcomm.com>

This patch adds support to update btcoex priority value via nl80211.
Here driver will be exposing the supported frame format for this
feature via btcoex_support_flags which is a member of
wiphy structure. 10.4 based firmware support this feature.
WMI service WMI_SERVICE_BTCOEX is used to identify the firmware support
of this feature. BTCOEX needs to enable to modify this value.

This patch has dependency of
"cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX"
patch.

Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     |   78 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |   19 +++++++
 drivers/net/wireless/ath/ath10k/wmi.c     |   19 +++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   18 +++++++
 4 files changed, 134 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e7131b9..ce5d529 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7502,6 +7502,71 @@ static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
 	return ret;
 }
 
+u32
+ath10k_mac_get_btcoex_prio(struct cfg80211_btcoex_priority *btcoex_priority)
+{
+	u32 btcoex_prio = 0;
+
+	if (btcoex_priority->wlan_be_preferred)
+		btcoex_prio |= WIPHY_WLAN_BE_PREFERRED;
+
+	if (btcoex_priority->wlan_bk_preferred)
+		btcoex_prio |= WIPHY_WLAN_BK_PREFERRED;
+
+	if (btcoex_priority->wlan_vi_preferred)
+		btcoex_prio |= WIPHY_WLAN_VI_PREFERRED;
+
+	if (btcoex_priority->wlan_vo_preferred)
+		btcoex_prio |= WIPHY_WLAN_VO_PREFERRED;
+
+	if (btcoex_priority->wlan_beacon_preferred)
+		btcoex_prio |= WIPHY_WLAN_BEACON_PREFERRED;
+
+	if (btcoex_priority->wlan_mgmt_preferred)
+		btcoex_prio |= WIPHY_WLAN_MGMT_PREFERRED;
+
+	return btcoex_prio;
+}
+
+static int ath10k_mac_op_set_btcoex_priority(struct ieee80211_hw *hw,
+			struct cfg80211_btcoex_priority *btcoex_priority)
+{
+	u32 btcoex_prio;
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags))) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->state != ATH10K_STATE_ON &&
+	    ar->state != ATH10K_STATE_RESTARTED) {
+		ret = -ENETDOWN;
+		goto exit;
+	}
+
+	btcoex_prio = ath10k_mac_get_btcoex_prio(btcoex_priority);
+
+	if (btcoex_prio > 0x3f) {
+		ret = -E2BIG;
+		goto exit;
+	}
+
+	ret = ath10k_wmi_set_coex_param(ar, btcoex_prio);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to set btcoex priority: %d\n", ret);
+		goto exit;
+	}
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_mac_op_tx,
 	.wake_tx_queue			= ath10k_mac_op_wake_tx_queue,
@@ -7544,6 +7609,7 @@ static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
 	.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
 	.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
 	.set_btcoex                     = ath10k_mac_op_set_btcoex,
+	.set_btcoex_priority		= ath10k_mac_op_set_btcoex_priority,
 
 	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
 
@@ -8134,6 +8200,18 @@ int ath10k_mac_register(struct ath10k *ar)
 	 */
 	ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;
 
+	if (test_bit(WMI_SERVICE_BTCOEX, ar->wmi.svc_map)) {
+		ar->hw->wiphy->btcoex_support_flags =
+			WIPHY_WLAN_BE_PREFERRED |
+			WIPHY_WLAN_BK_PREFERRED |
+			WIPHY_WLAN_VI_PREFERRED |
+			WIPHY_WLAN_VO_PREFERRED |
+			WIPHY_WLAN_BEACON_PREFERRED |
+			WIPHY_WLAN_MGMT_PREFERRED;
+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "btcoex supported mask :%u\n",
+			   ar->hw->wiphy->btcoex_support_flags);
+	}
+
 	switch (ar->running_fw->fw_file.wmi_op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index c9a8bb1..90c8390 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -197,6 +197,8 @@ struct wmi_ops {
 					(struct ath10k *ar,
 					 enum wmi_bss_survey_req_type type);
 	struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
+	struct sk_buff *(*gen_set_coex_param)(struct ath10k *ar,
+					      u32 btcoex_prio);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1411,4 +1413,21 @@ struct wmi_ops {
 	return ath10k_wmi_cmd_send(ar, skb, wmi->cmd->echo_cmdid);
 }
 
+static inline int
+ath10k_wmi_set_coex_param(struct ath10k *ar, u32 btcoex_prio)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_set_coex_param)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_set_coex_param(ar, btcoex_prio);
+
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->set_coex_param_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 387c4ee..de35c17 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -710,6 +710,7 @@
 	.pdev_bss_chan_info_request_cmdid =
 			WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
 	.ext_resource_cfg_cmdid = WMI_10_4_EXT_RESOURCE_CFG_CMDID,
+	.set_coex_param_cmdid = WMI_10_4_BTCOEX_CFG_CMDID,
 };
 
 /* MAIN WMI VDEV param map */
@@ -7859,6 +7860,23 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	return 0;
 }
 
+static struct sk_buff *
+ath10k_wmi_10_4_op_gen_set_coex_param(struct ath10k *ar,
+				      u32 btcoex_prio)
+{
+	struct wmi_set_coex_param_10_4_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_set_coex_param_10_4_cmd *)skb->data;
+	cmd->btcoex_prio = __cpu_to_le32(btcoex_prio);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "BTCOEX priority :%u\n", btcoex_prio);
+	return skb;
+}
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -8205,6 +8223,7 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
 	.gen_echo = ath10k_wmi_op_gen_echo,
 	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
+	.gen_set_coex_param = ath10k_wmi_10_4_op_gen_set_coex_param,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1b243c8..3a739e3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -184,6 +184,8 @@ enum wmi_service {
 	WMI_SERVICE_TX_MODE_PUSH_ONLY,
 	WMI_SERVICE_TX_MODE_PUSH_PULL,
 	WMI_SERVICE_TX_MODE_DYNAMIC,
+	WMI_SERVICE_VDEV_RX_FILTER,
+	WMI_SERVICE_BTCOEX,
 
 	/* keep last */
 	WMI_SERVICE_MAX,
@@ -310,6 +312,8 @@ enum wmi_10_4_service {
 	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
+	WMI_10_4_SERVICE_VDEV_RX_FILTER,
+	WMI_10_4_SERVICE_BTCOEX,
 };
 
 static inline char *wmi_service_name(int service_id)
@@ -408,6 +412,7 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
+	SVCSTR(WMI_SERVICE_BTCOEX);
 	default:
 		return NULL;
 	}
@@ -663,6 +668,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 	       WMI_SERVICE_TX_MODE_DYNAMIC, len);
+	SVCMAP(WMI_10_4_SERVICE_BTCOEX,
+	       WMI_SERVICE_BTCOEX, len);
 }
 
 #undef SVCMAP
@@ -837,6 +844,7 @@ struct wmi_cmd_map {
 	u32 pdev_bss_chan_info_request_cmdid;
 	u32 pdev_enable_adaptive_cca_cmdid;
 	u32 ext_resource_cfg_cmdid;
+	u32 set_coex_param_cmdid;
 };
 
 /*
@@ -1646,6 +1654,11 @@ enum wmi_10_4_cmd_id {
 	WMI_10_4_EXT_RESOURCE_CFG_CMDID,
 	WMI_10_4_VDEV_SET_IE_CMDID,
 	WMI_10_4_SET_LTEU_CONFIG_CMDID,
+	WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
+	WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
+	WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
+	WMI_10_4_PEER_BWF_REQUEST_CMDID,
+	WMI_10_4_BTCOEX_CFG_CMDID,
 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
 };
 
@@ -2723,6 +2736,11 @@ struct wmi_ext_resource_config_10_4_cmd {
 	__le32 fw_feature_bitmap;
 };
 
+struct wmi_set_coex_param_10_4_cmd {
+	/* contains wlan priority frame type value preferred over bt */
+	__le32 btcoex_prio;
+};
+
 /* strucutre describing host memory chunk. */
 struct host_memory_chunk {
 	/* id of the request that is passed up in service ready */
-- 
1.7.9.5


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2016-11-17 11:44 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-17 11:44 [PATCHv2 0/4] ath10k: Add support for BTCOEX feature c_traja
2016-11-17 11:44 ` c_traja
2016-11-17 11:44 ` c_traja
2016-11-17 11:44 ` [PATCHv2 1/4] ath10k: Add support to enable or disable btcoex via nl80211 c_traja
2016-11-17 11:44   ` c_traja
2016-11-17 11:44   ` c_traja
2016-11-17 13:51   ` kbuild test robot
2016-11-17 13:51     ` kbuild test robot
2016-11-17 13:51     ` kbuild test robot
2016-11-17 11:44 ` c_traja [this message]
2016-11-17 11:44   ` [PATCHv2 2/4] ath10k: Add support to update btcoex priority value " c_traja
2016-11-17 11:44   ` c_traja
2016-11-17 14:36   ` kbuild test robot
2016-11-17 14:36     ` kbuild test robot
2016-11-17 14:36     ` kbuild test robot
2016-11-17 11:44 ` [PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt c_traja
2016-11-17 11:44   ` [PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom, ath10k.txt c_traja
2016-11-17 11:44   ` [PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt c_traja-Rm6X0d1/PG5y9aJCnZT0Uw
2016-11-18 14:44   ` Rob Herring
2016-11-18 14:44     ` Rob Herring
2016-11-23 10:20     ` Tamizh chelvam
2016-11-23 10:20       ` Tamizh chelvam
2016-11-23 10:20       ` Tamizh chelvam
2016-11-17 11:44 ` [PATCHv2 4/4] ath10k: Add support to read btcoex related data from DT c_traja
2016-11-17 11:44   ` c_traja
2016-11-17 11:44   ` c_traja-Rm6X0d1/PG5y9aJCnZT0Uw

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479383064-25718-3-git-send-email-c_traja@qti.qualcomm.com \
    --to=c_traja@qti.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=tamizhchelvam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.