All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse@codeaurora.org>
To: freedreno@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 12/12] drm/msm: gpu: Use the zap shader on 5XX if we can
Date: Mon, 28 Nov 2016 12:28:37 -0700	[thread overview]
Message-ID: <1480361317-9937-13-git-send-email-jcrouse@codeaurora.org> (raw)
In-Reply-To: <1480361317-9937-1-git-send-email-jcrouse@codeaurora.org>

The A5XX GPU powers on in "secure" mode. In secure mode the GPU can
only render to buffers that are marked as secure and inaccessible
to the kernel and user through a series of hardware protections. In
practice secure mode is used to draw things like a UI on a secure
video frame.

In order to switch out of secure mode the GPU executes a special
shader that clears out the GMEM and other sensitve registers and
then writes a register. Because the kernel can't be trusted the
shader binary is signed and verified and programmed by the
secure world. To do this we need to read the MDT header and the
segments from the firmware location and put them in memory and
present them for approval.

For targets without secure support there is an out: if the
secure world doesn't support secure then there are no hardware
protections and we can freely write the SECVID_TRUST register from
the CPU. We don't have 100% confidence that we can query the
secure capabilities at run time but we have enough calls that
need to go right to give us some confidence that we're at least doing
something useful.

Of course if we guess wrong you trigger a permissions violation
which usually ends up in a system crash but thats a problem
that shows up immediately.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 72 ++++++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index eefe197..a7a58ec 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -469,6 +469,55 @@ static int a5xx_ucode_init(struct msm_gpu *gpu)
 	return 0;
 }
 
+static int a5xx_zap_shader_resume(struct msm_gpu *gpu)
+{
+	int ret;
+
+	ret = qcom_scm_gpu_zap_resume();
+	if (ret)
+		DRM_ERROR("%s: zap-shader resume failed: %d\n",
+			gpu->name, ret);
+
+	return ret;
+}
+
+static int a5xx_zap_shader_init(struct msm_gpu *gpu)
+{
+	static bool loaded;
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu);
+	struct platform_device *pdev = a5xx_gpu->pdev;
+	struct device_node *node;
+	int ret;
+
+	/*
+	 * If the zap shader is already loaded into memory we just need to kick
+	 * the remote processor to reinitialize it
+	 */
+	if (loaded)
+		return a5xx_zap_shader_resume(gpu);
+
+	/* Populate the sub-nodes if they haven't already been done */
+	of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+
+	/* Find the sub-node for the zap shader */
+	node = of_find_node_by_name(pdev->dev.of_node, "qcom,zap-shader");
+	if (!node) {
+		DRM_ERROR("%s: qcom,zap-shader not found in device tree\n",
+			gpu->name);
+		return -ENODEV;
+	}
+
+	ret = _pil_tz_load_image(of_find_device_by_node(node));
+	if (ret)
+		DRM_ERROR("%s: Unable to load the zap shader\n",
+			gpu->name);
+
+	loaded = !ret;
+
+	return ret;
+}
+
 #define A5XX_INT_MASK (A5XX_RBBM_INT_0_MASK_RBBM_AHB_ERROR | \
 	  A5XX_RBBM_INT_0_MASK_RBBM_TRANSFER_TIMEOUT | \
 	  A5XX_RBBM_INT_0_MASK_RBBM_ME_MS_TIMEOUT | \
@@ -653,8 +702,27 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 			return -EINVAL;
 	}
 
-	/* Put the GPU into unsecure mode */
-	gpu_write(gpu, REG_A5XX_RBBM_SECVID_TRUST_CNTL, 0x0);
+	/*
+	 * Try to load a zap shader into the secure world. If successful
+	 * we can use the CP to switch out of secure mode. If not then we
+	 * have no resource but to try to switch ourselves out manually. If we
+	 * guessed wrong then access to the RBBM_SECVID_TRUST_CNTL register will
+	 * be blocked and a permissions violation will soon follow.
+	 */
+	ret = a5xx_zap_shader_init(gpu);
+	if (!ret) {
+		OUT_PKT7(gpu->rb, CP_SET_SECURE_MODE, 1);
+		OUT_RING(gpu->rb, 0x00000000);
+
+		gpu->funcs->flush(gpu);
+		if (!gpu->funcs->idle(gpu))
+			return -EINVAL;
+	} else {
+		/* Print a warning so if we die, we know why */
+		dev_warn_once(gpu->dev->dev,
+			"Zap shader not enabled - using SECVID_TRUST_CNTL instead\n");
+		gpu_write(gpu, REG_A5XX_RBBM_SECVID_TRUST_CNTL, 0x0);
+	}
 
 	return 0;
 }
-- 
1.9.1

  parent reply	other threads:[~2016-11-28 19:28 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-28 19:28 [PATCH 00/12] Adreno A5XX support Jordan Crouse
2016-11-28 19:28 ` [PATCH 01/12] drm/msm: gpu: Cut down the list of "generic" registers to the ones we use Jordan Crouse
     [not found] ` <1480361317-9937-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-28 19:28   ` [PATCH 02/12] drm/msm: gpu: Return error on hw_init failure Jordan Crouse
2016-11-28 19:28   ` [PATCH 05/12] drm/msm: gpu: Add OUT_TYPE4 and OUT_TYPE7 Jordan Crouse
2016-11-28 19:28   ` [PATCH 06/12] drm/msm: Remove 'src_clk' from adreno configuration Jordan Crouse
2016-11-28 19:28 ` [PATCH 03/12] drm/msm: gpu Add new gpu register read/write functions Jordan Crouse
2016-11-28 19:28 ` [PATCH 04/12] drm/msm: Add adreno_gpu_write64() Jordan Crouse
2016-11-28 19:28 ` [PATCH 07/12] drm/msm: Disable interrupts during init Jordan Crouse
2016-11-28 19:28 ` [PATCH 08/12] drm/msm: gpu: Add A5XX target support Jordan Crouse
2016-11-28 19:28 ` [PATCH 09/12] drm/msm: gpu: Add support for the GPMU Jordan Crouse
2016-11-28 19:28 ` [PATCH 10/12] firmware: qcom_scm: Add qcom_scm_gpu_zap_resume() Jordan Crouse
2017-01-13 17:12   ` Andy Gross
     [not found]     ` <20170113171241.GH5710-3KkwrOJo9xYlRp7syxWybdHuzzzSOjJt@public.gmane.org>
2017-01-13 17:22       ` Jordan Crouse
     [not found]         ` <20170113172244.GA28592-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-13 17:45           ` Andy Gross
2017-01-13 23:24     ` [Freedreno] " Jordan Crouse
     [not found]       ` <20170113232438.GA24139-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-15  3:49         ` Andy Gross
2017-01-15  5:20           ` [Freedreno] " Andy Gross
2017-01-16 15:13             ` Stanimir Varbanov
2017-01-17 17:04             ` Jordan Crouse
     [not found]               ` <20170117170459.GA29647-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-17 19:31                 ` Andy Gross
     [not found]   ` <1480361317-9937-11-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-17  5:56     ` [PATCH] firmware: qcom_scm: Add set remote state API Andy Gross
     [not found]       ` <1484632578-4539-1-git-send-email-andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-18 16:51         ` Jordan Crouse
2017-01-18 17:37       ` Stanimir Varbanov
2017-01-24  9:54       ` Stanimir Varbanov
2017-01-24 16:11         ` Andy Gross
2016-11-28 19:28 ` [PATCH 11/12] drm/msm: Add a quick and dirty PIL loader Jordan Crouse
2016-12-05 19:57   ` Bjorn Andersson
2016-12-06 17:49     ` Jordan Crouse
2016-11-28 19:28 ` Jordan Crouse [this message]
2016-12-05 19:57   ` [PATCH 12/12] drm/msm: gpu: Use the zap shader on 5XX if we can Bjorn Andersson
2016-12-05 20:10     ` Bjorn Andersson
2016-12-06 15:35     ` Jordan Crouse
2016-12-06 16:37       ` [Freedreno] " Rob Clark
     [not found]       ` <20161206153501.GA25541-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2016-12-06 17:18         ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480361317-9937-13-git-send-email-jcrouse@codeaurora.org \
    --to=jcrouse@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.