From: Boris Brezillon <boris.brezillon@free-electrons.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, "Rafael J. Wysocki" <rjw@rjwysocki.net>, Len Brown <len.brown@intel.com>, Pavel Machek <pavel@ucw.cz>, linux-pm@vger.kernel.org Cc: Nicolas Ferre <nicolas.ferre@atmel.com>, Alexandre Belloni <alexandre.belloni@free-electrons.com>, linux-arm-kernel@lists.infradead.org, Boris Brezillon <boris.brezillon@free-electrons.com> Subject: [RFC PATCH 5/5] ARM: at91/dt: sama5d2_xplained: Add proper regulator states for suspend-to-mem Date: Fri, 2 Dec 2016 14:57:16 +0100 [thread overview] Message-ID: <1480687036-5037-6-git-send-email-boris.brezillon@free-electrons.com> (raw) In-Reply-To: <1480687036-5037-1-git-send-email-boris.brezillon@free-electrons.com> When entering suspend-to-mem, all PMIC outputs are disabled except VDDIODDR which is put in power saving mode, and whose voltage is increased (probably to counter the poor accuracy of power saving mode). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 32 +++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index da47fa19f474..db1fe0091c2a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -178,6 +178,14 @@ regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1400000>; + /* Power saving mode. */ + regulator-mode = <0>; + regulator-allow-changes-at-runtime; + }; }; vdd_1v2_reg: REG_DCDC2 { @@ -185,6 +193,10 @@ regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { @@ -192,6 +204,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_fuse_reg: REG_LDO1 { @@ -199,6 +215,10 @@ regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { @@ -206,6 +226,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_led_reg: REG_LDO3 { @@ -213,6 +237,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_sdhc_1v8_reg: REG_LDO4 { @@ -220,6 +248,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: boris.brezillon@free-electrons.com (Boris Brezillon) To: linux-arm-kernel@lists.infradead.org Subject: [RFC PATCH 5/5] ARM: at91/dt: sama5d2_xplained: Add proper regulator states for suspend-to-mem Date: Fri, 2 Dec 2016 14:57:16 +0100 [thread overview] Message-ID: <1480687036-5037-6-git-send-email-boris.brezillon@free-electrons.com> (raw) In-Reply-To: <1480687036-5037-1-git-send-email-boris.brezillon@free-electrons.com> When entering suspend-to-mem, all PMIC outputs are disabled except VDDIODDR which is put in power saving mode, and whose voltage is increased (probably to counter the poor accuracy of power saving mode). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 32 +++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index da47fa19f474..db1fe0091c2a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -178,6 +178,14 @@ regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1400000>; + /* Power saving mode. */ + regulator-mode = <0>; + regulator-allow-changes-at-runtime; + }; }; vdd_1v2_reg: REG_DCDC2 { @@ -185,6 +193,10 @@ regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { @@ -192,6 +204,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_fuse_reg: REG_LDO1 { @@ -199,6 +215,10 @@ regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { @@ -206,6 +226,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_led_reg: REG_LDO3 { @@ -213,6 +237,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_sdhc_1v8_reg: REG_LDO4 { @@ -220,6 +248,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; -- 2.7.4
next prev parent reply other threads:[~2016-12-02 13:57 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-12-02 13:57 [RFC PATCH 0/5] ARM: at91: sama5d2_xplained: Put the PMIC a proper suspend state Boris Brezillon 2016-12-02 13:57 ` Boris Brezillon 2016-12-02 13:57 ` [RFC PATCH 1/5] regulator: Extend the power-management APIs Boris Brezillon 2016-12-02 13:57 ` Boris Brezillon 2017-01-09 19:17 ` Mark Brown 2017-01-09 19:17 ` Mark Brown 2017-01-10 8:33 ` Boris Brezillon 2017-01-10 8:33 ` Boris Brezillon 2017-01-10 12:10 ` Mark Brown 2017-01-10 12:10 ` Mark Brown 2017-01-10 13:05 ` Boris Brezillon 2017-01-10 13:05 ` Boris Brezillon 2017-01-25 15:02 ` Alexandre Belloni 2017-01-25 15:02 ` Alexandre Belloni 2017-02-01 17:51 ` Mark Brown 2017-02-01 17:51 ` Mark Brown 2017-02-07 17:06 ` Boris Brezillon 2017-02-07 17:06 ` Boris Brezillon 2016-12-02 13:57 ` [RFC PATCH 2/5] regulator: Document the regulator-allow-changes-at-runtime DT property Boris Brezillon 2016-12-02 13:57 ` Boris Brezillon 2016-12-02 13:57 ` [RFC PATCH 3/5] ARM: at91: Call regulator_suspend_{begin, end}() in the platform pm ops Boris Brezillon 2016-12-02 13:57 ` Boris Brezillon 2016-12-02 13:57 ` [RFC PATCH 4/5] regulator: act8945: Implement PM functionalities Boris Brezillon 2016-12-02 13:57 ` Boris Brezillon 2016-12-02 13:57 ` Boris Brezillon [this message] 2016-12-02 13:57 ` [RFC PATCH 5/5] ARM: at91/dt: sama5d2_xplained: Add proper regulator states for suspend-to-mem Boris Brezillon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1480687036-5037-6-git-send-email-boris.brezillon@free-electrons.com \ --to=boris.brezillon@free-electrons.com \ --cc=alexandre.belloni@free-electrons.com \ --cc=broonie@kernel.org \ --cc=len.brown@intel.com \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-pm@vger.kernel.org \ --cc=nicolas.ferre@atmel.com \ --cc=pavel@ucw.cz \ --cc=rjw@rjwysocki.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.