All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: Bin Liu <b-liu@ti.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Tony Lindgren <tony@atomide.com>,
	joerg Reisenweber <joerg@openmoko.org>,
	linux-omap@vger.kernel.org,
	Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
	Sebastian Reichel <sre@kernel.org>,
	Aaro Koskinen <aaro.koskinen@iki.fi>, Pavel Machek <pavel@ucw.cz>,
	Nishanth Menon <nm@ti.com>, Felipe Balbi <balbi@kernel.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCH v2] usb: musb: debugfs: allow forcing host mode together with speed in testmode
Date: Sun, 18 Dec 2016 00:54:40 +0100	[thread overview]
Message-ID: <1482018880-1740-1-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <20161216040319.GA18350@uda0271908>

Based on the musb ug, force_host bit is allowed to be set along with
force_hs or force_fs bit.

It could help to implement forced host mode via testmode on Nokia N900.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
---
Changes in v2:
* Use == instead of & for comparison of testmode
---
 drivers/usb/musb/musb_debugfs.c |   44 +++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 9b22d94..5308cea 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -147,28 +147,34 @@ static int musb_test_mode_show(struct seq_file *s, void *unused)
 
 	test = musb_readb(musb->mregs, MUSB_TESTMODE);
 
-	if (test & MUSB_TEST_FORCE_HOST)
+	if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS))
+		seq_printf(s, "force host full-speed\n");
+
+	else if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS))
+		seq_printf(s, "force host high-speed\n");
+
+	else if (test == MUSB_TEST_FORCE_HOST)
 		seq_printf(s, "force host\n");
 
-	if (test & MUSB_TEST_FIFO_ACCESS)
+	else if (test == MUSB_TEST_FIFO_ACCESS)
 		seq_printf(s, "fifo access\n");
 
-	if (test & MUSB_TEST_FORCE_FS)
+	else if (test == MUSB_TEST_FORCE_FS)
 		seq_printf(s, "force full-speed\n");
 
-	if (test & MUSB_TEST_FORCE_HS)
+	else if (test == MUSB_TEST_FORCE_HS)
 		seq_printf(s, "force high-speed\n");
 
-	if (test & MUSB_TEST_PACKET)
+	else if (test == MUSB_TEST_PACKET)
 		seq_printf(s, "test packet\n");
 
-	if (test & MUSB_TEST_K)
+	else if (test == MUSB_TEST_K)
 		seq_printf(s, "test K\n");
 
-	if (test & MUSB_TEST_J)
+	else if (test == MUSB_TEST_J)
 		seq_printf(s, "test J\n");
 
-	if (test & MUSB_TEST_SE0_NAK)
+	else if (test == MUSB_TEST_SE0_NAK)
 		seq_printf(s, "test SE0 NAK\n");
 
 	return 0;
@@ -206,30 +212,36 @@ static ssize_t musb_test_mode_write(struct file *file,
 	if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
 
-	if (strstarts(buf, "force host"))
+	if (strstarts(buf, "force host full-speed"))
+		test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS;
+
+	else if (strstarts(buf, "force host high-speed"))
+		test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS;
+
+	else if (strstarts(buf, "force host"))
 		test = MUSB_TEST_FORCE_HOST;
 
-	if (strstarts(buf, "fifo access"))
+	else if (strstarts(buf, "fifo access"))
 		test = MUSB_TEST_FIFO_ACCESS;
 
-	if (strstarts(buf, "force full-speed"))
+	else if (strstarts(buf, "force full-speed"))
 		test = MUSB_TEST_FORCE_FS;
 
-	if (strstarts(buf, "force high-speed"))
+	else if (strstarts(buf, "force high-speed"))
 		test = MUSB_TEST_FORCE_HS;
 
-	if (strstarts(buf, "test packet")) {
+	else if (strstarts(buf, "test packet")) {
 		test = MUSB_TEST_PACKET;
 		musb_load_testpacket(musb);
 	}
 
-	if (strstarts(buf, "test K"))
+	else if (strstarts(buf, "test K"))
 		test = MUSB_TEST_K;
 
-	if (strstarts(buf, "test J"))
+	else if (strstarts(buf, "test J"))
 		test = MUSB_TEST_J;
 
-	if (strstarts(buf, "test SE0 NAK"))
+	else if (strstarts(buf, "test SE0 NAK"))
 		test = MUSB_TEST_SE0_NAK;
 
 	musb_writeb(musb->mregs, MUSB_TESTMODE, test);
-- 
1.7.9.5

  reply	other threads:[~2016-12-18  0:03 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-14 14:47 [PATCH] usb: musb: debugfs: allow forcing host mode together with speed in testmode Pali Rohár
2016-12-14 15:34 ` Tony Lindgren
2016-12-14 15:40   ` Pali Rohár
2016-12-14 15:50     ` Tony Lindgren
2016-12-14 16:44 ` Greg Kroah-Hartman
2016-12-14 16:44   ` Greg Kroah-Hartman
2016-12-14 19:23 ` Pali Rohár
2016-12-16  4:03   ` Bin Liu
2016-12-16  4:03     ` Bin Liu
2016-12-17 23:54     ` Pali Rohár [this message]
2016-12-19 15:10       ` [PATCH v2] " Bin Liu
2016-12-19 15:10         ` Bin Liu
2016-12-19 15:23       ` [PATCH v3] " Pali Rohár
2016-12-19 20:46         ` Bin Liu
2016-12-19 20:46           ` Bin Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1482018880-1740-1-git-send-email-pali.rohar@gmail.com \
    --to=pali.rohar@gmail.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=b-liu@ti.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ivo.g.dimitrov.75@gmail.com \
    --cc=joerg@openmoko.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pavel@ucw.cz \
    --cc=sre@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.