All of lore.kernel.org
 help / color / mirror / Atom feed
From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] reset: uniphier: add compatible string for LD11 SD-reset block
Date: Sun, 15 Jan 2017 04:04:46 +0900	[thread overview]
Message-ID: <1484420686-28911-1-git-send-email-yamada.masahiro@socionext.com> (raw)

The LD11 SoC is equipped with not only MIO-reset but also SD-reset
for controlling RST_n pin of the eMMC device.

Update the binding document and remove unneeded "." from each line
in itemization.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 .../devicetree/bindings/reset/uniphier-reset.txt   | 47 +++++++++++-----------
 drivers/reset/reset-uniphier.c                     |  4 ++
 2 files changed, 28 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 5020524..83ab0f5 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,14 +6,14 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
+    "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -68,13 +69,13 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 968c3ae..9c11be3 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -390,6 +390,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.data = uniphier_sld3_mio_reset_data,
 	},
 	{
+		.compatible = "socionext,uniphier-ld11-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
+	{
 		.compatible = "socionext,uniphier-ld20-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,
 	},
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] reset: uniphier: add compatible string for LD11 SD-reset block
Date: Sun, 15 Jan 2017 04:04:46 +0900	[thread overview]
Message-ID: <1484420686-28911-1-git-send-email-yamada.masahiro@socionext.com> (raw)

The LD11 SoC is equipped with not only MIO-reset but also SD-reset
for controlling RST_n pin of the eMMC device.

Update the binding document and remove unneeded "." from each line
in itemization.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 .../devicetree/bindings/reset/uniphier-reset.txt   | 47 +++++++++++-----------
 drivers/reset/reset-uniphier.c                     |  4 ++
 2 files changed, 28 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 5020524..83ab0f5 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,14 +6,14 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
+    "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -68,13 +69,13 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 968c3ae..9c11be3 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -390,6 +390,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.data = uniphier_sld3_mio_reset_data,
 	},
 	{
+		.compatible = "socionext,uniphier-ld11-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
+	{
 		.compatible = "socionext,uniphier-ld20-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,
 	},
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: yamada.masahiro@socionext.com (Masahiro Yamada)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] reset: uniphier: add compatible string for LD11 SD-reset block
Date: Sun, 15 Jan 2017 04:04:46 +0900	[thread overview]
Message-ID: <1484420686-28911-1-git-send-email-yamada.masahiro@socionext.com> (raw)

The LD11 SoC is equipped with not only MIO-reset but also SD-reset
for controlling RST_n pin of the eMMC device.

Update the binding document and remove unneeded "." from each line
in itemization.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 .../devicetree/bindings/reset/uniphier-reset.txt   | 47 +++++++++++-----------
 drivers/reset/reset-uniphier.c                     |  4 ++
 2 files changed, 28 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 5020524..83ab0f5 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,14 +6,14 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
+    "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -68,13 +69,13 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 968c3ae..9c11be3 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -390,6 +390,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.data = uniphier_sld3_mio_reset_data,
 	},
 	{
+		.compatible = "socionext,uniphier-ld11-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
+	{
 		.compatible = "socionext,uniphier-ld20-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,
 	},
-- 
2.7.4

             reply	other threads:[~2017-01-14 19:07 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-14 19:04 Masahiro Yamada [this message]
2017-01-14 19:04 ` [PATCH] reset: uniphier: add compatible string for LD11 SD-reset block Masahiro Yamada
2017-01-14 19:04 ` Masahiro Yamada
2017-01-17 10:07 ` Philipp Zabel
2017-01-17 10:07   ` Philipp Zabel
2017-01-17 10:07   ` Philipp Zabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484420686-28911-1-git-send-email-yamada.masahiro@socionext.com \
    --to=yamada.masahiro@socionext.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.