From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: linux-renesas-soc@vger.kernel.org, geert@linux-m68k.org,
gregkh@linuxfoundation.org
Cc: wsa@the-dreams.de, linux-serial@vger.kernel.org,
magnus.damm@gmail.com, sergei.shtylyov@cogentembedded.com,
Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Subject: [PATCH v4 1/4] serial: sh-sci: increase RX FIFO trigger defaults for (H)SCIF
Date: Fri, 3 Feb 2017 11:38:17 +0100 [thread overview]
Message-ID: <1486118300-12633-2-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
In-Reply-To: <1486118300-12633-1-git-send-email-ulrich.hecht+renesas@gmail.com>
Sets reasonable trigger defaults for the various SCIF variants.
Also corrects the FIFO size for SH7705-style ports.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/tty/serial/sh-sci.c | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 050d028..520e344 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -148,6 +148,7 @@ struct sci_port {
struct timer_list rx_timer;
unsigned int rx_timeout;
#endif
+ int rx_trigger;
bool has_rtscts;
bool autorts;
@@ -450,7 +451,7 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
},
- .fifosize = 16,
+ .fifosize = 64,
.overrun_reg = SCxSR,
.overrun_mask = SCIFA_ORER,
.sampling_rate_mask = SCI_SR(16),
@@ -2062,6 +2063,7 @@ static void sci_reset(struct uart_port *port)
{
const struct plat_sci_reg *reg;
unsigned int status;
+ struct sci_port *s = to_sci_port(port);
do {
status = serial_port_in(port, SCxSR);
@@ -2081,6 +2083,9 @@ static void sci_reset(struct uart_port *port)
status &= ~(SCLSR_TO | SCLSR_ORER);
serial_port_out(port, SCLSR, status);
}
+
+ if (s->rx_trigger > 1)
+ scif_set_rtrg(port, s->rx_trigger);
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -2615,6 +2620,28 @@ static int sci_init_single(struct platform_device *dev,
if (unlikely(sci_port->params == NULL))
return -EINVAL;
+ switch (p->type) {
+ case PORT_SCIFB:
+ sci_port->rx_trigger = 48;
+ break;
+ case PORT_HSCIF:
+ sci_port->rx_trigger = 64;
+ break;
+ case PORT_SCIFA:
+ sci_port->rx_trigger = 32;
+ break;
+ case PORT_SCIF:
+ if (p->regtype == SCIx_SH7705_SCIF_REGTYPE)
+ /* RX triggering not implemented for this IP */
+ sci_port->rx_trigger = 1;
+ else
+ sci_port->rx_trigger = 8;
+ break;
+ default:
+ sci_port->rx_trigger = 1;
+ break;
+ }
+
/* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
* match the SoC datasheet, this should be investigated. Let platform
* data override the sampling rate for now.
--
2.7.4
next prev parent reply other threads:[~2017-02-03 10:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-03 10:38 [PATCH v4 0/4] Renesas *SCIF* RX FIFO support Ulrich Hecht
2017-02-03 10:38 ` Ulrich Hecht [this message]
2017-02-07 14:40 ` [PATCH v4 1/4] serial: sh-sci: increase RX FIFO trigger defaults for (H)SCIF Geert Uytterhoeven
2017-02-03 10:38 ` [PATCH v4 2/4] serial: sh-sci: SCIFA/B RX FIFO software timeout Ulrich Hecht
2017-02-03 10:38 ` [PATCH v4 3/4] serial: sh-sci: make RX FIFO parameters tunable via sysfs Ulrich Hecht
2017-02-07 14:40 ` Geert Uytterhoeven
2017-02-08 10:04 ` Ulrich Hecht
2017-02-08 10:38 ` Geert Uytterhoeven
2017-02-12 16:04 ` Laurent Pinchart
2017-02-03 10:38 ` [PATCH v4 4/4] arm64: dts: r8a7796: salvator-x: add SCIF1 (DEBUG1) Ulrich Hecht
2017-02-08 10:54 ` Simon Horman
2017-02-08 11:19 ` Ulrich Hecht
2017-02-13 13:05 ` Simon Horman
2017-02-13 13:10 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486118300-12633-2-git-send-email-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.