From: <sean.wang@mediatek.com>
To: rpurdie@rpsys.net, jacek.anaszewski@gmail.com,
lee.jones@linaro.org, matthias.bgg@gmail.com, pavel@ucw.cz,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, keyhaede@gmail.com,
Sean Wang <sean.wang@mediatek.com>,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-leds@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] Documentation: devicetree: Add document bindings for leds-mt6323
Date: Wed, 8 Feb 2017 10:19:14 +0800 [thread overview]
Message-ID: <1486520357-13096-2-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1486520357-13096-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
This patch adds documentation for devicetree bindings
for LED support on MT6323 PMIC
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/leds/leds-mt6323.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..82bbf0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by
+MT6323 PMIC, so the LED controller are defined as
+the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of
+Muti-Function Device (MFD) using shared bus called
+PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+There's sub-node for the LED controller that describes
+the initial behavior for each LED physcially and currently
+only four LED sub-nodes could be supported.
+
+Required properties:
+- compatible : must be "mediatek,mt6323-led"
+
+Optional properties:
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323led: mt6323led{
+ compatible = "mediatek,mt6323-led";
+
+ led0: isink0 {
+ lebel = "LED0"
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+ led1: isink1 {
+ label = "LED1";
+ default-state = "on";
+ };
+ led2: isink2 {
+ label = "LED2";
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+ };
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com>
To: <rpurdie@rpsys.net>, <jacek.anaszewski@gmail.com>,
<lee.jones@linaro.org>, <matthias.bgg@gmail.com>, <pavel@ucw.cz>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>, <linux-leds@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <keyhaede@gmail.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v2 1/4] Documentation: devicetree: Add document bindings for leds-mt6323
Date: Wed, 8 Feb 2017 10:19:14 +0800 [thread overview]
Message-ID: <1486520357-13096-2-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1486520357-13096-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
This patch adds documentation for devicetree bindings
for LED support on MT6323 PMIC
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/leds/leds-mt6323.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..82bbf0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by
+MT6323 PMIC, so the LED controller are defined as
+the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of
+Muti-Function Device (MFD) using shared bus called
+PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+There's sub-node for the LED controller that describes
+the initial behavior for each LED physcially and currently
+only four LED sub-nodes could be supported.
+
+Required properties:
+- compatible : must be "mediatek,mt6323-led"
+
+Optional properties:
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323led: mt6323led{
+ compatible = "mediatek,mt6323-led";
+
+ led0: isink0 {
+ lebel = "LED0"
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+ led1: isink1 {
+ label = "LED1";
+ default-state = "on";
+ };
+ led2: isink2 {
+ label = "LED2";
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+ };
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: sean.wang@mediatek.com (sean.wang at mediatek.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] Documentation: devicetree: Add document bindings for leds-mt6323
Date: Wed, 8 Feb 2017 10:19:14 +0800 [thread overview]
Message-ID: <1486520357-13096-2-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1486520357-13096-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
This patch adds documentation for devicetree bindings
for LED support on MT6323 PMIC
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/leds/leds-mt6323.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..82bbf0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by
+MT6323 PMIC, so the LED controller are defined as
+the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of
+Muti-Function Device (MFD) using shared bus called
+PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+There's sub-node for the LED controller that describes
+the initial behavior for each LED physcially and currently
+only four LED sub-nodes could be supported.
+
+Required properties:
+- compatible : must be "mediatek,mt6323-led"
+
+Optional properties:
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323led: mt6323led{
+ compatible = "mediatek,mt6323-led";
+
+ led0: isink0 {
+ lebel = "LED0"
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+ led1: isink1 {
+ label = "LED1";
+ default-state = "on";
+ };
+ led2: isink2 {
+ label = "LED2";
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+ };
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2017-02-08 2:19 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-08 2:19 [PATCH v2 0/4] leds: add leds-mt6323 support on MT7623 SoC sean.wang
2017-02-08 2:19 ` sean.wang at mediatek.com
2017-02-08 2:19 ` sean.wang
2017-02-08 2:19 ` sean.wang [this message]
2017-02-08 2:19 ` [PATCH v2 1/4] Documentation: devicetree: Add document bindings for leds-mt6323 sean.wang at mediatek.com
2017-02-08 2:19 ` sean.wang
2017-02-08 2:47 ` Andrew Lunn
2017-02-08 2:47 ` Andrew Lunn
[not found] ` <1486520357-13096-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-02-08 2:19 ` [PATCH v2 2/4] Documentation: devicetree: Add LED subnode binding for MT6323 PMIC sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-02-08 2:19 ` sean.wang at mediatek.com
2017-02-08 2:19 ` sean.wang
2017-02-08 12:22 ` Lee Jones
2017-02-08 12:22 ` Lee Jones
2017-02-08 2:19 ` [PATCH v2 3/4] leds: Add LED support " sean.wang
2017-02-08 2:19 ` sean.wang at mediatek.com
2017-02-08 2:19 ` sean.wang
2017-02-08 21:00 ` Jacek Anaszewski
2017-02-08 21:00 ` Jacek Anaszewski
2017-02-08 21:00 ` Jacek Anaszewski
2017-02-09 6:09 ` Sean Wang
2017-02-09 6:09 ` Sean Wang
2017-02-09 6:09 ` Sean Wang
2017-02-09 14:23 ` Pavel Machek
2017-02-09 14:23 ` Pavel Machek
2017-02-09 14:23 ` Pavel Machek
2017-02-09 20:35 ` Jacek Anaszewski
2017-02-09 20:35 ` Jacek Anaszewski
2017-02-08 2:19 ` [PATCH v2 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver sean.wang
2017-02-08 2:19 ` sean.wang at mediatek.com
2017-02-08 2:19 ` sean.wang
2017-02-08 12:21 ` Lee Jones
2017-02-08 12:21 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486520357-13096-2-git-send-email-sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=keyhaede@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.