From: Yannick Fertre <yannick.fertre@st.com> To: Alexandre TORGUE <alexandre.torgue@st.com>, Thierry Reding <thierry.reding@gmail.com>, David Airlie <airlied@linux.ie>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Russell King <linux@armlinux.org.uk>, Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>, Benjamin Gaignard <benjamin.gaignard@st.com>, Yannick Fertre <yannick.fertre@st.com> Cc: devicetree@vger.kernel.org, kernel@stlinux.com, Philippe Cornu <philippe.cornu@st.com>, Fabien Dessenne <fabien.dessenne@st.com>, dri-devel@lists.freedesktop.org, Mickael Reulier <mickael.reulier@st.com>, Vincent Abriou <vincent.abriou@st.com>, Gabriel FERNANDEZ <gabriel.fernandez@st.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/7] dt-bindings: display: add STM32 LTDC driver Date: Mon, 20 Feb 2017 17:08:35 +0100 [thread overview] Message-ID: <1487606921-26981-2-git-send-email-yannick.fertre@st.com> (raw) In-Reply-To: <1487606921-26981-1-git-send-email-yannick.fertre@st.com> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> --- .../devicetree/bindings/display/st,stm32-ltdc.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt new file mode 100644 index 0000000..e8d39c5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -0,0 +1,36 @@ +* STMicroelectronics STM32 lcd-tft display controller + +- ltdc: lcd-tft display controller host + must be a sub-node of st-display-subsystem + Required properties: + - compatible: "st,stm32-ltdc" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ltdc it should contain: + - "clk-lcd" for the clock feeding the output pixel clock & IP clock. + - resets: reset to be used by the device (defined by use of RCC macro). + Required nodes: + - Video port for RGB output. + +Example: + +/ { + ... + soc { + ... + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_rgb: endpoint { + }; + }; + }; + }; +}; -- 1.9.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: yannick.fertre@st.com (Yannick Fertre) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/7] dt-bindings: display: add STM32 LTDC driver Date: Mon, 20 Feb 2017 17:08:35 +0100 [thread overview] Message-ID: <1487606921-26981-2-git-send-email-yannick.fertre@st.com> (raw) In-Reply-To: <1487606921-26981-1-git-send-email-yannick.fertre@st.com> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> --- .../devicetree/bindings/display/st,stm32-ltdc.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt new file mode 100644 index 0000000..e8d39c5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -0,0 +1,36 @@ +* STMicroelectronics STM32 lcd-tft display controller + +- ltdc: lcd-tft display controller host + must be a sub-node of st-display-subsystem + Required properties: + - compatible: "st,stm32-ltdc" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ltdc it should contain: + - "clk-lcd" for the clock feeding the output pixel clock & IP clock. + - resets: reset to be used by the device (defined by use of RCC macro). + Required nodes: + - Video port for RGB output. + +Example: + +/ { + ... + soc { + ... + ltdc: display-controller at 40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_rgb: endpoint { + }; + }; + }; + }; +}; -- 1.9.1
next prev parent reply other threads:[~2017-02-20 16:08 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-02-20 16:08 [PATCH v3 0/7] STM32 LCD-TFT display controller Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre [this message] 2017-02-20 16:08 ` [PATCH v3 1/7] dt-bindings: display: add STM32 LTDC driver Yannick Fertre 2017-02-21 14:04 ` Rob Herring 2017-02-21 14:04 ` Rob Herring 2017-02-20 16:08 ` [PATCH v3 2/7] drm/st: Add " Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre 2017-02-20 16:08 ` [PATCH v3 3/7] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre 2017-02-27 19:39 ` Rob Herring 2017-02-27 19:39 ` Rob Herring 2017-02-20 16:08 ` [PATCH v3 4/7] drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre 2017-02-20 16:08 ` [PATCH v3 5/7] ARM: dts: stm32: Add ltdc support on stm32f429 MCU Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre 2017-02-20 16:08 ` [PATCH v3 6/7] ARM: dts: stm32: Enable ltdc & simple panel on stm32f429-Eval board Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre 2017-02-20 16:08 ` [PATCH v3 7/7] ARM: configs: stm32: ADD LDTC support Yannick Fertre 2017-02-20 16:08 ` Yannick Fertre
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1487606921-26981-2-git-send-email-yannick.fertre@st.com \ --to=yannick.fertre@st.com \ --cc=airlied@linux.ie \ --cc=alexandre.torgue@st.com \ --cc=arnd@arndb.de \ --cc=benjamin.gaignard@st.com \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=fabien.dessenne@st.com \ --cc=gabriel.fernandez@st.com \ --cc=kernel@stlinux.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux@armlinux.org.uk \ --cc=mark.rutland@arm.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=mickael.reulier@st.com \ --cc=philippe.cornu@st.com \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ --cc=vincent.abriou@st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.