From: Jun Gao <jun.gao@mediatek.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: <srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-i2c@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
Jun Gao <jun.gao@mediatek.com>
Subject: [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
Date: Fri, 3 Mar 2017 10:05:13 +0800 [thread overview]
Message-ID: <1488506713-20767-3-git-send-email-jun.gao@mediatek.com> (raw)
In-Reply-To: <1488506713-20767-1-git-send-email-jun.gao@mediatek.com>
From: Jun Gao <jun.gao@mediatek.com>
Add MT2701 i2c device node.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 44 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..a908e94 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -24,6 +24,50 @@
};
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ i2c0_pins_a: i2c0@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+ <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+ <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+ <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..0d1539f 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,48 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmsys: syscon@14000000 {
compatible = "mediatek,mt2701-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Jun Gao <jun.gao@mediatek.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: srv_heupstream@mediatek.com, devicetree@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
Jun Gao <jun.gao@mediatek.com>
Subject: [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
Date: Fri, 3 Mar 2017 10:05:13 +0800 [thread overview]
Message-ID: <1488506713-20767-3-git-send-email-jun.gao@mediatek.com> (raw)
In-Reply-To: <1488506713-20767-1-git-send-email-jun.gao@mediatek.com>
From: Jun Gao <jun.gao@mediatek.com>
Add MT2701 i2c device node.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 44 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..a908e94 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -24,6 +24,50 @@
};
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ i2c0_pins_a: i2c0@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+ <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+ <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+ <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..0d1539f 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,48 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmsys: syscon@14000000 {
compatible = "mediatek,mt2701-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: jun.gao@mediatek.com (Jun Gao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
Date: Fri, 3 Mar 2017 10:05:13 +0800 [thread overview]
Message-ID: <1488506713-20767-3-git-send-email-jun.gao@mediatek.com> (raw)
In-Reply-To: <1488506713-20767-1-git-send-email-jun.gao@mediatek.com>
From: Jun Gao <jun.gao@mediatek.com>
Add MT2701 i2c device node.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 44 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..a908e94 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -24,6 +24,50 @@
};
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ i2c0_pins_a: i2c0 at 0 {
+ pins1 {
+ pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+ <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1 at 0 {
+ pins1 {
+ pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+ <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2 at 0 {
+ pins1 {
+ pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+ <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..0d1539f 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,48 @@
status = "disabled";
};
+ i2c0: i2c at 11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmsys: syscon at 14000000 {
compatible = "mediatek,mt2701-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
--
1.7.9.5
next prev parent reply other threads:[~2017-03-03 2:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 2:05 [PATCH v3 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc Jun Gao
2017-03-03 2:05 ` Jun Gao
2017-03-03 2:05 ` Jun Gao
2017-03-03 2:05 ` [PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding Jun Gao
2017-03-03 2:05 ` Jun Gao
2017-03-03 2:05 ` Jun Gao
2017-03-03 2:05 ` Jun Gao [this message]
2017-03-03 2:05 ` [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node Jun Gao
2017-03-03 2:05 ` Jun Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488506713-20767-3-git-send-email-jun.gao@mediatek.com \
--to=jun.gao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.