From: Smitha T Murthy <smitha.t@samsung.com> To: linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org Cc: kyungmin.park@samsung.com, kamil@wypas.org, jtp.park@samsung.com, a.hajda@samsung.com, mchehab@kernel.org, pankaj.dubey@samsung.com, krzk@kernel.org, m.szyprowski@samsung.com, s.nawrocki@samsung.com, Smitha T Murthy <smitha.t@samsung.com> Subject: [Patch v2 08/11] s5p-mfc: Add VP9 decoder support Date: Fri, 03 Mar 2017 14:37:13 +0530 [thread overview] Message-ID: <1488532036-13044-9-git-send-email-smitha.t@samsung.com> (raw) In-Reply-To: <1488532036-13044-1-git-send-email-smitha.t@samsung.com> Add support for codec definition and corresponding buffer requirements for VP9 decoder. Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> --- drivers/media/platform/s5p-mfc/regs-mfc-v10.h | 6 +++++ drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c | 3 ++ drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 1 + drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 8 ++++++ drivers/media/platform/s5p-mfc/s5p_mfc_opr.h | 2 + drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 27 +++++++++++++++++++++++ 6 files changed, 47 insertions(+), 0 deletions(-) diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h index bb79932..846dcf5 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h @@ -18,6 +18,8 @@ /* MFCv10 register definitions*/ #define S5P_FIMV_MFC_CLOCK_OFF_V10 0x7120 #define S5P_FIMV_MFC_STATE_V10 0x7124 +#define S5P_FIMV_D_STATIC_BUFFER_ADDR_V10 0xF570 +#define S5P_FIMV_D_STATIC_BUFFER_SIZE_V10 0xF574 /* MFCv10 Context buffer sizes */ #define MFC_CTX_BUF_SIZE_V10 (30 * SZ_1K) /* 30KB */ @@ -34,8 +36,12 @@ /* MFCv10 codec defines*/ #define S5P_FIMV_CODEC_HEVC_DEC 17 +#define S5P_FIMV_CODEC_VP9_DEC 18 #define S5P_FIMV_CODEC_HEVC_ENC 26 +/* Decoder buffer size for MFC v10 */ +#define DEC_VP9_STATIC_BUFFER_SIZE 20480 + /* Encoder buffer size for MFC v10.0 */ #define ENC_V100_BASE_SIZE(x, y) \ (((x + 3) * (y + 3) * 8) \ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c index 76eca67..102b47e 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c @@ -104,6 +104,9 @@ static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx) case S5P_MFC_CODEC_HEVC_DEC: codec_type = S5P_FIMV_CODEC_HEVC_DEC; break; + case S5P_MFC_CODEC_VP9_DEC: + codec_type = S5P_FIMV_CODEC_VP9_DEC; + break; case S5P_MFC_CODEC_H264_ENC: codec_type = S5P_FIMV_CODEC_H264_ENC_V6; break; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 5c46060..e720ce6 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -80,6 +80,7 @@ static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b) #define S5P_MFC_CODEC_VC1RCV_DEC 6 #define S5P_MFC_CODEC_VP8_DEC 7 #define S5P_MFC_CODEC_HEVC_DEC 17 +#define S5P_MFC_CODEC_VP9_DEC 18 #define S5P_MFC_CODEC_H264_ENC 20 #define S5P_MFC_CODEC_H264_MVC_ENC 21 diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 9f459b3..93626ed 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -164,6 +164,14 @@ .num_planes = 1, .versions = MFC_V10_BIT, }, + { + .name = "VP9 Encoded Stream", + .fourcc = V4L2_PIX_FMT_VP9, + .codec_mode = S5P_FIMV_CODEC_VP9_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + .versions = MFC_V10_BIT, + }, }; #define NUM_FORMATS ARRAY_SIZE(formats) diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h index 6478f70..565decf 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h @@ -170,6 +170,8 @@ struct s5p_mfc_regs { void __iomem *d_used_dpb_flag_upper;/* v7 and v8 */ void __iomem *d_used_dpb_flag_lower;/* v7 and v8 */ void __iomem *d_min_scratch_buffer_size; /* v10 */ + void __iomem *d_static_buffer_addr; /* v10 */ + void __iomem *d_static_buffer_size; /* v10 */ /* encoder registers */ void __iomem *e_frame_width; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index cda0403..7dcc671 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -228,6 +228,12 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) ctx->scratch_buf_size + (ctx->mv_count * ctx->mv_size); break; + case S5P_MFC_CODEC_VP9_DEC: + mfc_debug(2, "Use min scratch buffer size\n"); + ctx->bank1.size = + ctx->scratch_buf_size + + DEC_VP9_STATIC_BUFFER_SIZE; + break; case S5P_MFC_CODEC_H264_ENC: if (IS_MFCV10(dev)) { mfc_debug(2, "Use min scratch buffer size\n"); @@ -339,6 +345,7 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct s5p_mfc_ctx *ctx) case S5P_MFC_CODEC_VC1_DEC: case S5P_MFC_CODEC_MPEG2_DEC: case S5P_MFC_CODEC_VP8_DEC: + case S5P_MFC_CODEC_VP9_DEC: ctx->ctx.size = buf_size->other_dec_ctx; break; case S5P_MFC_CODEC_H264_ENC: @@ -573,6 +580,14 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx) } } + if (ctx->codec_mode == S5P_FIMV_CODEC_VP9_DEC) { + writel(buf_addr1, mfc_regs->d_static_buffer_addr); + writel(DEC_VP9_STATIC_BUFFER_SIZE, + mfc_regs->d_static_buffer_size); + buf_addr1 += DEC_VP9_STATIC_BUFFER_SIZE; + buf_size1 -= DEC_VP9_STATIC_BUFFER_SIZE; + } + mfc_debug(2, "Buf1: %zu, buf_size1: %d (frames %d)\n", buf_addr1, buf_size1, ctx->total_dpb_count); if (buf_size1 < 0) { @@ -2278,6 +2293,18 @@ static unsigned int s5p_mfc_get_crop_info_v_v6(struct s5p_mfc_ctx *ctx) R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8); R(e_min_scratch_buffer_size, S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8); + if (!IS_MFCV10(dev)) + goto done; + + /* Initialize registers used in MFC v10 only. + * Also, over-write the registers which have + * a different offset for MFC v10. + */ + + /* decoder registers */ + R(d_static_buffer_addr, S5P_FIMV_D_STATIC_BUFFER_ADDR_V10); + R(d_static_buffer_size, S5P_FIMV_D_STATIC_BUFFER_SIZE_V10); + done: return &mfc_regs; #undef S5P_MFC_REG_ADDR -- 1.7.2.3
WARNING: multiple messages have this Message-ID (diff)
From: smitha.t@samsung.com (Smitha T Murthy) To: linux-arm-kernel@lists.infradead.org Subject: [Patch v2 08/11] s5p-mfc: Add VP9 decoder support Date: Fri, 03 Mar 2017 14:37:13 +0530 [thread overview] Message-ID: <1488532036-13044-9-git-send-email-smitha.t@samsung.com> (raw) In-Reply-To: <1488532036-13044-1-git-send-email-smitha.t@samsung.com> Add support for codec definition and corresponding buffer requirements for VP9 decoder. Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> --- drivers/media/platform/s5p-mfc/regs-mfc-v10.h | 6 +++++ drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c | 3 ++ drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 1 + drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 8 ++++++ drivers/media/platform/s5p-mfc/s5p_mfc_opr.h | 2 + drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 27 +++++++++++++++++++++++ 6 files changed, 47 insertions(+), 0 deletions(-) diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h index bb79932..846dcf5 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h @@ -18,6 +18,8 @@ /* MFCv10 register definitions*/ #define S5P_FIMV_MFC_CLOCK_OFF_V10 0x7120 #define S5P_FIMV_MFC_STATE_V10 0x7124 +#define S5P_FIMV_D_STATIC_BUFFER_ADDR_V10 0xF570 +#define S5P_FIMV_D_STATIC_BUFFER_SIZE_V10 0xF574 /* MFCv10 Context buffer sizes */ #define MFC_CTX_BUF_SIZE_V10 (30 * SZ_1K) /* 30KB */ @@ -34,8 +36,12 @@ /* MFCv10 codec defines*/ #define S5P_FIMV_CODEC_HEVC_DEC 17 +#define S5P_FIMV_CODEC_VP9_DEC 18 #define S5P_FIMV_CODEC_HEVC_ENC 26 +/* Decoder buffer size for MFC v10 */ +#define DEC_VP9_STATIC_BUFFER_SIZE 20480 + /* Encoder buffer size for MFC v10.0 */ #define ENC_V100_BASE_SIZE(x, y) \ (((x + 3) * (y + 3) * 8) \ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c index 76eca67..102b47e 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c @@ -104,6 +104,9 @@ static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx) case S5P_MFC_CODEC_HEVC_DEC: codec_type = S5P_FIMV_CODEC_HEVC_DEC; break; + case S5P_MFC_CODEC_VP9_DEC: + codec_type = S5P_FIMV_CODEC_VP9_DEC; + break; case S5P_MFC_CODEC_H264_ENC: codec_type = S5P_FIMV_CODEC_H264_ENC_V6; break; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 5c46060..e720ce6 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -80,6 +80,7 @@ static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b) #define S5P_MFC_CODEC_VC1RCV_DEC 6 #define S5P_MFC_CODEC_VP8_DEC 7 #define S5P_MFC_CODEC_HEVC_DEC 17 +#define S5P_MFC_CODEC_VP9_DEC 18 #define S5P_MFC_CODEC_H264_ENC 20 #define S5P_MFC_CODEC_H264_MVC_ENC 21 diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 9f459b3..93626ed 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -164,6 +164,14 @@ .num_planes = 1, .versions = MFC_V10_BIT, }, + { + .name = "VP9 Encoded Stream", + .fourcc = V4L2_PIX_FMT_VP9, + .codec_mode = S5P_FIMV_CODEC_VP9_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + .versions = MFC_V10_BIT, + }, }; #define NUM_FORMATS ARRAY_SIZE(formats) diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h index 6478f70..565decf 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h @@ -170,6 +170,8 @@ struct s5p_mfc_regs { void __iomem *d_used_dpb_flag_upper;/* v7 and v8 */ void __iomem *d_used_dpb_flag_lower;/* v7 and v8 */ void __iomem *d_min_scratch_buffer_size; /* v10 */ + void __iomem *d_static_buffer_addr; /* v10 */ + void __iomem *d_static_buffer_size; /* v10 */ /* encoder registers */ void __iomem *e_frame_width; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index cda0403..7dcc671 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -228,6 +228,12 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) ctx->scratch_buf_size + (ctx->mv_count * ctx->mv_size); break; + case S5P_MFC_CODEC_VP9_DEC: + mfc_debug(2, "Use min scratch buffer size\n"); + ctx->bank1.size = + ctx->scratch_buf_size + + DEC_VP9_STATIC_BUFFER_SIZE; + break; case S5P_MFC_CODEC_H264_ENC: if (IS_MFCV10(dev)) { mfc_debug(2, "Use min scratch buffer size\n"); @@ -339,6 +345,7 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct s5p_mfc_ctx *ctx) case S5P_MFC_CODEC_VC1_DEC: case S5P_MFC_CODEC_MPEG2_DEC: case S5P_MFC_CODEC_VP8_DEC: + case S5P_MFC_CODEC_VP9_DEC: ctx->ctx.size = buf_size->other_dec_ctx; break; case S5P_MFC_CODEC_H264_ENC: @@ -573,6 +580,14 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx) } } + if (ctx->codec_mode == S5P_FIMV_CODEC_VP9_DEC) { + writel(buf_addr1, mfc_regs->d_static_buffer_addr); + writel(DEC_VP9_STATIC_BUFFER_SIZE, + mfc_regs->d_static_buffer_size); + buf_addr1 += DEC_VP9_STATIC_BUFFER_SIZE; + buf_size1 -= DEC_VP9_STATIC_BUFFER_SIZE; + } + mfc_debug(2, "Buf1: %zu, buf_size1: %d (frames %d)\n", buf_addr1, buf_size1, ctx->total_dpb_count); if (buf_size1 < 0) { @@ -2278,6 +2293,18 @@ static unsigned int s5p_mfc_get_crop_info_v_v6(struct s5p_mfc_ctx *ctx) R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8); R(e_min_scratch_buffer_size, S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8); + if (!IS_MFCV10(dev)) + goto done; + + /* Initialize registers used in MFC v10 only. + * Also, over-write the registers which have + * a different offset for MFC v10. + */ + + /* decoder registers */ + R(d_static_buffer_addr, S5P_FIMV_D_STATIC_BUFFER_ADDR_V10); + R(d_static_buffer_size, S5P_FIMV_D_STATIC_BUFFER_SIZE_V10); + done: return &mfc_regs; #undef S5P_MFC_REG_ADDR -- 1.7.2.3
next prev parent reply other threads:[~2017-03-03 9:07 UTC|newest] Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <CGME20170303090429epcas5p3c057f653b6a6b6299ad2392490925fd9@epcas5p3.samsung.com> 2017-03-03 9:07 ` [Patch v2 00/11] Add MFC v10.10 support Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy [not found] ` <CGME20170303090433epcas5p35aed4fe00755163bd5dcf4fb56ccb9d0@epcas5p3.samsung.com> 2017-03-03 9:07 ` [Patch v2 01/11] s5p-mfc: Rename IS_MFCV8 macro Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy [not found] ` <CGME20170303090436epcas1p2097d589d9c5e6f7ee634ab9917cc987e@epcas1p2.samsung.com> 2017-03-03 9:07 ` [Patch v2 02/11] s5p-mfc: Adding initial support for MFC v10.10 Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-06 13:58 ` Andrzej Hajda 2017-03-06 13:58 ` Andrzej Hajda 2017-03-14 11:37 ` Smitha T Murthy 2017-03-14 11:37 ` Smitha T Murthy 2017-03-15 19:52 ` Rob Herring 2017-03-15 19:52 ` Rob Herring 2017-03-20 5:27 ` Smitha T Murthy 2017-03-20 5:27 ` Smitha T Murthy [not found] ` <CGME20170303090440epcas5p33f1bea986f2f9c961c93af94df7ec565@epcas5p3.samsung.com> 2017-03-03 9:07 ` [Patch v2 03/11] s5p-mfc: Use min scratch buffer size as provided by F/W Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-06 14:18 ` Andrzej Hajda 2017-03-06 14:18 ` Andrzej Hajda 2017-03-14 11:37 ` Smitha T Murthy 2017-03-14 11:37 ` Smitha T Murthy [not found] ` <CGME20170303090444epcas5p338f4cd2b1746da117f69907ca09e0ea9@epcas5p3.samsung.com> 2017-03-03 9:07 ` [Patch v2 04/11] s5p-mfc: Support MFCv10.10 buffer requirements Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-06 14:48 ` Andrzej Hajda 2017-03-06 14:48 ` Andrzej Hajda 2017-03-14 11:38 ` Smitha T Murthy 2017-03-14 11:38 ` Smitha T Murthy [not found] ` <CGME20170303090449epcas5p3adcab3282b760d01ccb775bbd95c57f5@epcas5p3.samsung.com> 2017-03-03 9:07 ` [Patch v2 05/11] videodev2.h: Add v4l2 definition for HEVC Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-06 14:52 ` Andrzej Hajda 2017-03-06 14:52 ` Andrzej Hajda 2017-03-14 11:38 ` Smitha T Murthy 2017-03-14 11:38 ` Smitha T Murthy [not found] ` <CGME20170303090454epcas5p3b7faeac000db97fcf4cb06e361bf32e7@epcas5p3.samsung.com> 2017-03-03 9:07 ` [Patch v2 06/11] s5p-mfc: Add support for HEVC decoder Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy [not found] ` <CGME20170303090459epcas5p4498e5a633739ef3829ba1fccd79f6821@epcas5p4.samsung.com> 2017-03-03 9:07 ` [Patch v2 07/11] Documentation: v4l: Documentation for HEVC v4l2 definition Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-07 8:39 ` Andrzej Hajda 2017-03-07 8:39 ` Andrzej Hajda 2017-03-14 11:38 ` Smitha T Murthy 2017-03-14 11:38 ` Smitha T Murthy [not found] ` <CGME20170303090504epcas5p4f218e2ff6dbdc13728e140ec474d4d3d@epcas5p4.samsung.com> 2017-03-03 9:07 ` Smitha T Murthy [this message] 2017-03-03 9:07 ` [Patch v2 08/11] s5p-mfc: Add VP9 decoder support Smitha T Murthy [not found] ` <CGME20170303090508epcas1p2ff5f5849d680c3558c564e77444fce53@epcas1p2.samsung.com> 2017-03-03 9:07 ` [Patch v2 09/11] v4l2: Add v4l2 control IDs for HEVC encoder Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-07 8:48 ` Andrzej Hajda 2017-03-07 8:48 ` Andrzej Hajda 2017-03-14 11:39 ` Smitha T Murthy 2017-03-14 11:39 ` Smitha T Murthy [not found] ` <CGME20170303090513epcas1p261f4564fd9e093d8f8b03269a154a933@epcas1p2.samsung.com> 2017-03-03 9:07 ` [Patch v2 10/11] s5p-mfc: Add support " Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-07 11:33 ` Andrzej Hajda 2017-03-07 11:33 ` Andrzej Hajda 2017-03-14 11:41 ` Smitha T Murthy 2017-03-14 11:41 ` Smitha T Murthy 2017-03-27 12:09 ` Andrzej Hajda 2017-03-27 12:09 ` Andrzej Hajda 2017-03-28 4:45 ` Smitha T Murthy 2017-03-28 4:45 ` Smitha T Murthy 2017-03-31 9:00 ` Smitha T Murthy 2017-03-31 9:00 ` Smitha T Murthy [not found] ` <CGME20170303090518epcas5p4d50e0bbaae69e93dc931c29ffaaa658b@epcas5p4.samsung.com> 2017-03-03 9:07 ` [Patch v2 11/11] Documention: v4l: Documentation for HEVC CIDs Smitha T Murthy 2017-03-03 9:07 ` Smitha T Murthy 2017-03-07 12:08 ` Andrzej Hajda 2017-03-07 12:08 ` Andrzej Hajda 2017-03-14 11:41 ` Smitha T Murthy 2017-03-14 11:41 ` Smitha T Murthy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1488532036-13044-9-git-send-email-smitha.t@samsung.com \ --to=smitha.t@samsung.com \ --cc=a.hajda@samsung.com \ --cc=jtp.park@samsung.com \ --cc=kamil@wypas.org \ --cc=krzk@kernel.org \ --cc=kyungmin.park@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=mchehab@kernel.org \ --cc=pankaj.dubey@samsung.com \ --cc=s.nawrocki@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.