All of lore.kernel.org
 help / color / mirror / Atom feed
From: <sean.wang@mediatek.com>
To: rpurdie@rpsys.net, jacek.anaszewski@gmail.com,
	lee.jones@linaro.org, matthias.bgg@gmail.com, pavel@ucw.cz,
	robh+dt@kernel.org, mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-leds@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, keyhaede@gmail.com,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v5 1/4] dt-bindings: leds: Add document bindings for leds-mt6323
Date: Fri, 3 Mar 2017 21:56:22 +0800	[thread overview]
Message-ID: <1488549385-19899-2-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1488549385-19899-1-git-send-email-sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

This patch adds documentation for devicetree bindings
for LED support on MT6323 PMIC

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../devicetree/bindings/leds/leds-mt6323.txt       | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..135c441
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,63 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by
+MT6323 PMIC, so the LED controllers are defined as
+the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of
+Muti-Function Device (MFD) using shared bus called
+PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+There's sub-node for the LED controller that describes
+the initial behavior for each LED physically and currently
+only four LED sub-nodes can be supported.
+
+Required properties:
+- compatible : Must be "mediatek,mt6323-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+LED sub-node properties:
+- reg : LED channel number (0..3)
+- label : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+  see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+
+		...
+
+		mt6323led: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				label = "LED0";
+				linux,default-trigger = "timer";
+				default-state = "on";
+			};
+			led@1 {
+				reg = <1>;
+				label = "LED1";
+				default-state = "off";
+			};
+			led@2 {
+				reg = <2>;
+				label = "LED2";
+				default-state = "on";
+			};
+		};
+	};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com>
To: <rpurdie@rpsys.net>, <jacek.anaszewski@gmail.com>,
	<lee.jones@linaro.org>, <matthias.bgg@gmail.com>, <pavel@ucw.cz>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>, <linux-leds@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <keyhaede@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v5 1/4] dt-bindings: leds: Add document bindings for leds-mt6323
Date: Fri, 3 Mar 2017 21:56:22 +0800	[thread overview]
Message-ID: <1488549385-19899-2-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1488549385-19899-1-git-send-email-sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

This patch adds documentation for devicetree bindings
for LED support on MT6323 PMIC

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../devicetree/bindings/leds/leds-mt6323.txt       | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..135c441
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,63 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by
+MT6323 PMIC, so the LED controllers are defined as
+the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of
+Muti-Function Device (MFD) using shared bus called
+PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+There's sub-node for the LED controller that describes
+the initial behavior for each LED physically and currently
+only four LED sub-nodes can be supported.
+
+Required properties:
+- compatible : Must be "mediatek,mt6323-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+LED sub-node properties:
+- reg : LED channel number (0..3)
+- label : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+  see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+
+		...
+
+		mt6323led: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				label = "LED0";
+				linux,default-trigger = "timer";
+				default-state = "on";
+			};
+			led@1 {
+				reg = <1>;
+				label = "LED1";
+				default-state = "off";
+			};
+			led@2 {
+				reg = <2>;
+				label = "LED2";
+				default-state = "on";
+			};
+		};
+	};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: sean.wang@mediatek.com (sean.wang at mediatek.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/4] dt-bindings: leds: Add document bindings for leds-mt6323
Date: Fri, 3 Mar 2017 21:56:22 +0800	[thread overview]
Message-ID: <1488549385-19899-2-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1488549385-19899-1-git-send-email-sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

This patch adds documentation for devicetree bindings
for LED support on MT6323 PMIC

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../devicetree/bindings/leds/leds-mt6323.txt       | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..135c441
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,63 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by
+MT6323 PMIC, so the LED controllers are defined as
+the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of
+Muti-Function Device (MFD) using shared bus called
+PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+There's sub-node for the LED controller that describes
+the initial behavior for each LED physically and currently
+only four LED sub-nodes can be supported.
+
+Required properties:
+- compatible : Must be "mediatek,mt6323-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+LED sub-node properties:
+- reg : LED channel number (0..3)
+- label : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+  see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+
+		...
+
+		mt6323led: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led at 0 {
+				reg = <0>;
+				label = "LED0";
+				linux,default-trigger = "timer";
+				default-state = "on";
+			};
+			led at 1 {
+				reg = <1>;
+				label = "LED1";
+				default-state = "off";
+			};
+			led at 2 {
+				reg = <2>;
+				label = "LED2";
+				default-state = "on";
+			};
+		};
+	};
-- 
1.9.1

  reply	other threads:[~2017-03-03 13:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-03 13:56 [PATCH v5 0/4] leds: add leds-mt6323 support on MT7623 SoC sean.wang
2017-03-03 13:56 ` sean.wang at mediatek.com
2017-03-03 13:56 ` sean.wang
2017-03-03 13:56 ` sean.wang [this message]
2017-03-03 13:56   ` [PATCH v5 1/4] dt-bindings: leds: Add document bindings for leds-mt6323 sean.wang at mediatek.com
2017-03-03 13:56   ` sean.wang
2017-03-12 14:04   ` Rob Herring
2017-03-12 14:04     ` Rob Herring
2017-03-03 13:56 ` [PATCH v5 2/4] dt-bindings: mfd: Add LED subnode binding for MT6323 PMIC sean.wang
2017-03-03 13:56   ` sean.wang at mediatek.com
2017-03-03 13:56   ` sean.wang
2017-03-12 14:05   ` Rob Herring
2017-03-12 14:05     ` Rob Herring
2017-03-13 12:00   ` Matthias Brugger
2017-03-13 12:00     ` Matthias Brugger
2017-03-13 12:00     ` Matthias Brugger
     [not found]     ` <c86eacdb-d5c8-2f0a-11f1-1a3bc623b4b0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-13 18:35       ` Jacek Anaszewski
2017-03-13 18:35         ` Jacek Anaszewski
2017-03-13 18:35         ` Jacek Anaszewski
2017-03-14  5:40       ` Sean Wang
2017-03-14  5:40         ` Sean Wang
2017-03-14  5:40         ` Sean Wang
2017-03-03 13:56 ` [PATCH v5 3/4] leds: Add LED support " sean.wang
2017-03-03 13:56   ` sean.wang at mediatek.com
2017-03-03 13:56   ` sean.wang
     [not found] ` <1488549385-19899-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-03 13:56   ` [PATCH v5 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-03-03 13:56     ` sean.wang at mediatek.com
2017-03-03 13:56     ` sean.wang
2017-03-14 14:42     ` Lee Jones
2017-03-14 14:42       ` Lee Jones
2017-03-14 14:42       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488549385-19899-2-git-send-email-sean.wang@mediatek.com \
    --to=sean.wang@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=keyhaede@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=rpurdie@rpsys.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.