From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <mohammed@codeaurora.org>, <linux-wireless@vger.kernel.org>, "Mohammed Shafi Shajakhan" <mohammed@qti.qualcomm.com> Subject: [PATCH] ath10k: Fix NAPI enable/disable symmetry for AHB interface Date: Mon, 20 Mar 2017 20:52:46 +0530 [thread overview] Message-ID: <1490023366-8176-1-git-send-email-mohammed@qca.qualcomm.com> (raw) From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Move NAPI enable to 'ath10k_ahb_hif_start' from 'ath10k_ahb_hif_power_up'. This is to maintain the symmetry of calling napi_enable() from ath10k_ahb_hif_start() so that it matches with napi_disable() being called from ath10k_pci_hif_stop(). This change is based on the crash fix from Kalle for PCI interface in commit 1427228d5869 ("ath10k: fix napi crash during rmmod when probe firmware fails"). Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/ahb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c index 45226db..da770af 100644 --- a/drivers/net/wireless/ath/ath10k/ahb.c +++ b/drivers/net/wireless/ath/ath10k/ahb.c @@ -640,6 +640,7 @@ static int ath10k_ahb_hif_start(struct ath10k *ar) { ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif start\n"); + napi_enable(&ar->napi); ath10k_ce_enable_interrupts(ar); ath10k_pci_enable_legacy_irq(ar); @@ -692,7 +693,6 @@ static int ath10k_ahb_hif_power_up(struct ath10k *ar) ath10k_err(ar, "could not wake up target CPU: %d\n", ret); goto err_ce_deinit; } - napi_enable(&ar->napi); return 0; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: mohammed@codeaurora.org, linux-wireless@vger.kernel.org, Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Subject: [PATCH] ath10k: Fix NAPI enable/disable symmetry for AHB interface Date: Mon, 20 Mar 2017 20:52:46 +0530 [thread overview] Message-ID: <1490023366-8176-1-git-send-email-mohammed@qca.qualcomm.com> (raw) From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Move NAPI enable to 'ath10k_ahb_hif_start' from 'ath10k_ahb_hif_power_up'. This is to maintain the symmetry of calling napi_enable() from ath10k_ahb_hif_start() so that it matches with napi_disable() being called from ath10k_pci_hif_stop(). This change is based on the crash fix from Kalle for PCI interface in commit 1427228d5869 ("ath10k: fix napi crash during rmmod when probe firmware fails"). Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/ahb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c index 45226db..da770af 100644 --- a/drivers/net/wireless/ath/ath10k/ahb.c +++ b/drivers/net/wireless/ath/ath10k/ahb.c @@ -640,6 +640,7 @@ static int ath10k_ahb_hif_start(struct ath10k *ar) { ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif start\n"); + napi_enable(&ar->napi); ath10k_ce_enable_interrupts(ar); ath10k_pci_enable_legacy_irq(ar); @@ -692,7 +693,6 @@ static int ath10k_ahb_hif_power_up(struct ath10k *ar) ath10k_err(ar, "could not wake up target CPU: %d\n", ret); goto err_ce_deinit; } - napi_enable(&ar->napi); return 0; -- 1.9.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2017-03-20 15:21 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-20 15:22 Mohammed Shafi Shajakhan [this message] 2017-03-20 15:22 ` [PATCH] ath10k: Fix NAPI enable/disable symmetry for AHB interface Mohammed Shafi Shajakhan 2017-04-05 7:34 ` Kalle Valo 2017-04-05 7:34 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1490023366-8176-1-git-send-email-mohammed@qca.qualcomm.com \ --to=mohammed@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=mohammed@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.