From: Dan Williams <dan.j.williams@intel.com> To: linux-nvdimm@lists.01.org Cc: linux-acpi@vger.kernel.org Subject: [PATCH v2 4/7] acpi, nfit: support "map failed" dimms Date: Fri, 14 Apr 2017 14:57:27 -0700 [thread overview] Message-ID: <149220704691.36563.10986793740530987407.stgit@dwillia2-desk3.amr.corp.intel.com> (raw) In-Reply-To: <149220702552.36563.10552898152402020832.stgit@dwillia2-desk3.amr.corp.intel.com> Stop requiring dimms be successfully mapped into a system-physical-address range. For provisioning and hardware remediation purposes the kernel should account for failed devices in sysfs. If possible it should still allow management commands to be sent to the device. Reported-by: Toshi Kani <toshi.kani@hpe.com> Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- drivers/acpi/nfit/core.c | 53 ++++++++++++++++++++++++++++++++++++---------- drivers/acpi/nfit/nfit.h | 2 +- 2 files changed, 42 insertions(+), 13 deletions(-) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 05829de43b1d..2bd842c46fbb 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -738,28 +738,38 @@ static void nfit_mem_init_bdw(struct acpi_nfit_desc *acpi_desc, } } -static int nfit_mem_dcr_init(struct acpi_nfit_desc *acpi_desc, +static int __nfit_mem_init(struct acpi_nfit_desc *acpi_desc, struct acpi_nfit_system_address *spa) { struct nfit_mem *nfit_mem, *found; struct nfit_memdev *nfit_memdev; - int type = nfit_spa_type(spa); + int type = spa ? nfit_spa_type(spa) : 0; switch (type) { case NFIT_SPA_DCR: case NFIT_SPA_PM: break; default: - return 0; + if (spa) + return 0; } + /* + * This loop runs in two modes, when a dimm is mapped the loop + * adds memdev associations to an existing dimm, or creates a + * dimm. In the unmapped dimm case this loop sweeps for memdev + * instances with an invalid / zero range_index and adds those + * dimms without spa associations. + */ list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) { struct nfit_flush *nfit_flush; struct nfit_dcr *nfit_dcr; u32 device_handle; u16 dcr; - if (nfit_memdev->memdev->range_index != spa->range_index) + if (spa && nfit_memdev->memdev->range_index != spa->range_index) + continue; + if (!spa && nfit_memdev->memdev->range_index) continue; found = NULL; dcr = nfit_memdev->memdev->region_index; @@ -844,14 +854,15 @@ static int nfit_mem_dcr_init(struct acpi_nfit_desc *acpi_desc, break; } nfit_mem_init_bdw(acpi_desc, nfit_mem, spa); - } else { + } else if (type == NFIT_SPA_PM) { /* * A single dimm may belong to multiple SPA-PM * ranges, record at least one in addition to * any SPA-DCR range. */ nfit_mem->memdev_pmem = nfit_memdev->memdev; - } + } else + nfit_mem->memdev_dcr = nfit_memdev->memdev; } return 0; @@ -875,6 +886,8 @@ static int nfit_mem_cmp(void *priv, struct list_head *_a, struct list_head *_b) static int nfit_mem_init(struct acpi_nfit_desc *acpi_desc) { struct nfit_spa *nfit_spa; + int rc; + /* * For each SPA-DCR or SPA-PMEM address range find its @@ -885,13 +898,20 @@ static int nfit_mem_init(struct acpi_nfit_desc *acpi_desc) * BDWs are optional. */ list_for_each_entry(nfit_spa, &acpi_desc->spas, list) { - int rc; - - rc = nfit_mem_dcr_init(acpi_desc, nfit_spa->spa); + rc = __nfit_mem_init(acpi_desc, nfit_spa->spa); if (rc) return rc; } + /* + * If a DIMM has failed to be mapped into SPA there will be no + * SPA entries above. Find and register all the unmapped DIMMs + * for reporting and recovery purposes. + */ + rc = __nfit_mem_init(acpi_desc, NULL); + if (rc) + return rc; + list_sort(NULL, &acpi_desc->dimms, nfit_mem_cmp); return 0; @@ -1301,8 +1321,16 @@ static umode_t acpi_nfit_dimm_attr_visible(struct kobject *kobj, struct device *dev = container_of(kobj, struct device, kobj); struct nvdimm *nvdimm = to_nvdimm(dev); - if (!to_nfit_dcr(dev)) + if (!to_nfit_dcr(dev)) { + /* Without a dcr only the memdev attributes can be surfaced */ + if (a == &dev_attr_handle.attr || a == &dev_attr_phys_id.attr + || a == &dev_attr_flags.attr + || a == &dev_attr_family.attr + || a == &dev_attr_dsm_mask.attr) + return a->mode; return 0; + } + if (a == &dev_attr_format1.attr && num_nvdimm_formats(nvdimm) <= 1) return 0; return a->mode; @@ -1522,12 +1550,13 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc) if ((mem_flags & ACPI_NFIT_MEM_FAILED_MASK) == 0) continue; - dev_info(acpi_desc->dev, "%s flags:%s%s%s%s\n", + dev_info(acpi_desc->dev, "%s flags:%s%s%s%s%s\n", nvdimm_name(nvdimm), mem_flags & ACPI_NFIT_MEM_SAVE_FAILED ? " save_fail" : "", mem_flags & ACPI_NFIT_MEM_RESTORE_FAILED ? " restore_fail":"", mem_flags & ACPI_NFIT_MEM_FLUSH_FAILED ? " flush_fail" : "", - mem_flags & ACPI_NFIT_MEM_NOT_ARMED ? " not_armed" : ""); + mem_flags & ACPI_NFIT_MEM_NOT_ARMED ? " not_armed" : "", + mem_flags & ACPI_NFIT_MEM_MAP_FAILED ? " map_fail" : ""); } diff --git a/drivers/acpi/nfit/nfit.h b/drivers/acpi/nfit/nfit.h index fc29c2e9832e..aaabd2721f8e 100644 --- a/drivers/acpi/nfit/nfit.h +++ b/drivers/acpi/nfit/nfit.h @@ -37,7 +37,7 @@ #define ACPI_NFIT_MEM_FAILED_MASK (ACPI_NFIT_MEM_SAVE_FAILED \ | ACPI_NFIT_MEM_RESTORE_FAILED | ACPI_NFIT_MEM_FLUSH_FAILED \ - | ACPI_NFIT_MEM_NOT_ARMED) + | ACPI_NFIT_MEM_NOT_ARMED | ACPI_NFIT_MEM_MAP_FAILED) enum nfit_uuids { /* for simplicity alias the uuid index with the family id */ _______________________________________________ Linux-nvdimm mailing list Linux-nvdimm@lists.01.org https://lists.01.org/mailman/listinfo/linux-nvdimm
WARNING: multiple messages have this Message-ID (diff)
From: Dan Williams <dan.j.williams@intel.com> To: linux-nvdimm@lists.01.org Cc: Linda Knippers <linda.knippers@hpe.com>, linux-acpi@vger.kernel.org, Toshi Kani <toshi.kani@hpe.com> Subject: [PATCH v2 4/7] acpi, nfit: support "map failed" dimms Date: Fri, 14 Apr 2017 14:57:27 -0700 [thread overview] Message-ID: <149220704691.36563.10986793740530987407.stgit@dwillia2-desk3.amr.corp.intel.com> (raw) In-Reply-To: <149220702552.36563.10552898152402020832.stgit@dwillia2-desk3.amr.corp.intel.com> Stop requiring dimms be successfully mapped into a system-physical-address range. For provisioning and hardware remediation purposes the kernel should account for failed devices in sysfs. If possible it should still allow management commands to be sent to the device. Reported-by: Toshi Kani <toshi.kani@hpe.com> Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- drivers/acpi/nfit/core.c | 53 ++++++++++++++++++++++++++++++++++++---------- drivers/acpi/nfit/nfit.h | 2 +- 2 files changed, 42 insertions(+), 13 deletions(-) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 05829de43b1d..2bd842c46fbb 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -738,28 +738,38 @@ static void nfit_mem_init_bdw(struct acpi_nfit_desc *acpi_desc, } } -static int nfit_mem_dcr_init(struct acpi_nfit_desc *acpi_desc, +static int __nfit_mem_init(struct acpi_nfit_desc *acpi_desc, struct acpi_nfit_system_address *spa) { struct nfit_mem *nfit_mem, *found; struct nfit_memdev *nfit_memdev; - int type = nfit_spa_type(spa); + int type = spa ? nfit_spa_type(spa) : 0; switch (type) { case NFIT_SPA_DCR: case NFIT_SPA_PM: break; default: - return 0; + if (spa) + return 0; } + /* + * This loop runs in two modes, when a dimm is mapped the loop + * adds memdev associations to an existing dimm, or creates a + * dimm. In the unmapped dimm case this loop sweeps for memdev + * instances with an invalid / zero range_index and adds those + * dimms without spa associations. + */ list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) { struct nfit_flush *nfit_flush; struct nfit_dcr *nfit_dcr; u32 device_handle; u16 dcr; - if (nfit_memdev->memdev->range_index != spa->range_index) + if (spa && nfit_memdev->memdev->range_index != spa->range_index) + continue; + if (!spa && nfit_memdev->memdev->range_index) continue; found = NULL; dcr = nfit_memdev->memdev->region_index; @@ -844,14 +854,15 @@ static int nfit_mem_dcr_init(struct acpi_nfit_desc *acpi_desc, break; } nfit_mem_init_bdw(acpi_desc, nfit_mem, spa); - } else { + } else if (type == NFIT_SPA_PM) { /* * A single dimm may belong to multiple SPA-PM * ranges, record at least one in addition to * any SPA-DCR range. */ nfit_mem->memdev_pmem = nfit_memdev->memdev; - } + } else + nfit_mem->memdev_dcr = nfit_memdev->memdev; } return 0; @@ -875,6 +886,8 @@ static int nfit_mem_cmp(void *priv, struct list_head *_a, struct list_head *_b) static int nfit_mem_init(struct acpi_nfit_desc *acpi_desc) { struct nfit_spa *nfit_spa; + int rc; + /* * For each SPA-DCR or SPA-PMEM address range find its @@ -885,13 +898,20 @@ static int nfit_mem_init(struct acpi_nfit_desc *acpi_desc) * BDWs are optional. */ list_for_each_entry(nfit_spa, &acpi_desc->spas, list) { - int rc; - - rc = nfit_mem_dcr_init(acpi_desc, nfit_spa->spa); + rc = __nfit_mem_init(acpi_desc, nfit_spa->spa); if (rc) return rc; } + /* + * If a DIMM has failed to be mapped into SPA there will be no + * SPA entries above. Find and register all the unmapped DIMMs + * for reporting and recovery purposes. + */ + rc = __nfit_mem_init(acpi_desc, NULL); + if (rc) + return rc; + list_sort(NULL, &acpi_desc->dimms, nfit_mem_cmp); return 0; @@ -1301,8 +1321,16 @@ static umode_t acpi_nfit_dimm_attr_visible(struct kobject *kobj, struct device *dev = container_of(kobj, struct device, kobj); struct nvdimm *nvdimm = to_nvdimm(dev); - if (!to_nfit_dcr(dev)) + if (!to_nfit_dcr(dev)) { + /* Without a dcr only the memdev attributes can be surfaced */ + if (a == &dev_attr_handle.attr || a == &dev_attr_phys_id.attr + || a == &dev_attr_flags.attr + || a == &dev_attr_family.attr + || a == &dev_attr_dsm_mask.attr) + return a->mode; return 0; + } + if (a == &dev_attr_format1.attr && num_nvdimm_formats(nvdimm) <= 1) return 0; return a->mode; @@ -1522,12 +1550,13 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc) if ((mem_flags & ACPI_NFIT_MEM_FAILED_MASK) == 0) continue; - dev_info(acpi_desc->dev, "%s flags:%s%s%s%s\n", + dev_info(acpi_desc->dev, "%s flags:%s%s%s%s%s\n", nvdimm_name(nvdimm), mem_flags & ACPI_NFIT_MEM_SAVE_FAILED ? " save_fail" : "", mem_flags & ACPI_NFIT_MEM_RESTORE_FAILED ? " restore_fail":"", mem_flags & ACPI_NFIT_MEM_FLUSH_FAILED ? " flush_fail" : "", - mem_flags & ACPI_NFIT_MEM_NOT_ARMED ? " not_armed" : ""); + mem_flags & ACPI_NFIT_MEM_NOT_ARMED ? " not_armed" : "", + mem_flags & ACPI_NFIT_MEM_MAP_FAILED ? " map_fail" : ""); } diff --git a/drivers/acpi/nfit/nfit.h b/drivers/acpi/nfit/nfit.h index fc29c2e9832e..aaabd2721f8e 100644 --- a/drivers/acpi/nfit/nfit.h +++ b/drivers/acpi/nfit/nfit.h @@ -37,7 +37,7 @@ #define ACPI_NFIT_MEM_FAILED_MASK (ACPI_NFIT_MEM_SAVE_FAILED \ | ACPI_NFIT_MEM_RESTORE_FAILED | ACPI_NFIT_MEM_FLUSH_FAILED \ - | ACPI_NFIT_MEM_NOT_ARMED) + | ACPI_NFIT_MEM_NOT_ARMED | ACPI_NFIT_MEM_MAP_FAILED) enum nfit_uuids { /* for simplicity alias the uuid index with the family id */
next prev parent reply other threads:[~2017-04-14 22:03 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-04-14 21:57 [PATCH v2 0/7] libnvdimm: acpi updates and a revert Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 21:57 ` [PATCH v2 1/7] Revert "libnvdimm: band aid btt vs clear poison locking" Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 21:57 ` [PATCH v2 2/7] acpi, nfit: add support for acpi 6.1 dimm state flags Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 21:57 ` [PATCH v2 3/7] tools/testing/nvdimm: test acpi 6.1 health " Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 21:57 ` Dan Williams [this message] 2017-04-14 21:57 ` [PATCH v2 4/7] acpi, nfit: support "map failed" dimms Dan Williams 2017-04-14 21:57 ` [PATCH v2 5/7] acpi, nfit: collate health state flags Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 21:57 ` [PATCH v2 6/7] acpi, nfit: limit ->flush_probe() to initialization work Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 21:57 ` [PATCH v2 7/7] tools/testing/nvdimm: fix nfit_test shutdown crashes Dan Williams 2017-04-14 21:57 ` Dan Williams 2017-04-14 23:26 ` Linda Knippers 2017-04-14 23:26 ` Linda Knippers 2017-04-14 23:37 ` Dan Williams 2017-04-14 23:37 ` Dan Williams
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=149220704691.36563.10986793740530987407.stgit@dwillia2-desk3.amr.corp.intel.com \ --to=dan.j.williams@intel.com \ --cc=linux-acpi@vger.kernel.org \ --cc=linux-nvdimm@lists.01.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.