All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v5 08/11] drm/i915: Convert intel_dp properties to atomic, v2.
Date: Tue, 25 Apr 2017 13:55:32 +0200	[thread overview]
Message-ID: <1493121335-18603-9-git-send-email-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <1493121335-18603-1-git-send-email-maarten.lankhorst@linux.intel.com>

intel_dp supports 3 properties, scaling mode, broadcast rgb and
force_audio. intel_digital_connector handles the plumbing,
so we only have to hook this up in compute_config and init.

Changes since v1:
- Remove limited_color_range too, unused. (danvet)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c  | 112 +++++----------------------------------
 drivers/gpu/drm/i915/intel_drv.h |   4 --
 2 files changed, 13 insertions(+), 103 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 06575b67f398..828e5708f943 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1648,6 +1648,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	enum port port = dp_to_dig_port(intel_dp)->port;
 	struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
+	struct intel_digital_connector_state *intel_conn_state =
+		to_intel_digital_connector_state(conn_state);
 	int lane_count, clock;
 	int min_lane_count = 1;
 	int max_lane_count = intel_dp_max_lane_count(intel_dp);
@@ -1673,10 +1675,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	pipe_config->has_drrs = false;
 	if (port == PORT_A)
 		pipe_config->has_audio = false;
-	else if (intel_dp->force_audio == HDMI_AUDIO_AUTO)
+	else if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
 		pipe_config->has_audio = intel_dp->has_audio;
 	else
-		pipe_config->has_audio = intel_dp->force_audio == HDMI_AUDIO_ON;
+		pipe_config->has_audio = intel_conn_state->force_audio == HDMI_AUDIO_ON;
 
 	if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
 		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
@@ -1691,10 +1693,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 
 		if (HAS_GMCH_DISPLAY(dev_priv))
 			intel_gmch_panel_fitting(intel_crtc, pipe_config,
-						 intel_connector->panel.fitting_mode);
+						 conn_state->scaling_mode);
 		else
 			intel_pch_panel_fitting(intel_crtc, pipe_config,
-						intel_connector->panel.fitting_mode);
+						conn_state->scaling_mode);
 	}
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
@@ -1763,7 +1765,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	return false;
 
 found:
-	if (intel_dp->color_range_auto) {
+	if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) {
 		/*
 		 * See:
 		 * CEA-861-E - 5.1 Default Encoding Parameters
@@ -1775,7 +1777,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 			HDMI_QUANTIZATION_RANGE_LIMITED;
 	} else {
 		pipe_config->limited_color_range =
-			intel_dp->limited_color_range;
+			intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED;
 	}
 
 	pipe_config->lane_count = lane_count;
@@ -4812,94 +4814,6 @@ static int intel_dp_get_modes(struct drm_connector *connector)
 }
 
 static int
-intel_dp_set_property(struct drm_connector *connector,
-		      struct drm_property *property,
-		      uint64_t val)
-{
-	struct drm_i915_private *dev_priv = to_i915(connector->dev);
-	struct intel_connector *intel_connector = to_intel_connector(connector);
-	struct intel_encoder *intel_encoder = intel_attached_encoder(connector);
-	struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
-	int ret;
-
-	ret = drm_object_property_set_value(&connector->base, property, val);
-	if (ret)
-		return ret;
-
-	if (property == dev_priv->force_audio_property) {
-		int i = val;
-		bool has_audio, old_has_audio;
-		int old_force_audio = intel_dp->force_audio;
-
-		if (i == intel_dp->force_audio)
-			return 0;
-
-		if (old_force_audio == HDMI_AUDIO_AUTO)
-			old_has_audio = intel_dp->has_audio;
-		else
-			old_has_audio = old_force_audio;
-
-		intel_dp->force_audio = i;
-
-		if (i == HDMI_AUDIO_AUTO)
-			has_audio = intel_dp->has_audio;
-		else
-			has_audio = (i == HDMI_AUDIO_ON);
-
-		if (has_audio == old_has_audio)
-			return 0;
-
-		goto done;
-	}
-
-	if (property == dev_priv->broadcast_rgb_property) {
-		bool old_auto = intel_dp->color_range_auto;
-		bool old_range = intel_dp->limited_color_range;
-
-		switch (val) {
-		case INTEL_BROADCAST_RGB_AUTO:
-			intel_dp->color_range_auto = true;
-			break;
-		case INTEL_BROADCAST_RGB_FULL:
-			intel_dp->color_range_auto = false;
-			intel_dp->limited_color_range = false;
-			break;
-		case INTEL_BROADCAST_RGB_LIMITED:
-			intel_dp->color_range_auto = false;
-			intel_dp->limited_color_range = true;
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		if (old_auto == intel_dp->color_range_auto &&
-		    old_range == intel_dp->limited_color_range)
-			return 0;
-
-		goto done;
-	}
-
-	if (property == connector->scaling_mode_property) {
-		if (intel_connector->panel.fitting_mode == val) {
-			/* the eDP scaling property is not changed */
-			return 0;
-		}
-		intel_connector->panel.fitting_mode = val;
-		connector->state->scaling_mode = val;
-
-		goto done;
-	}
-
-	return -EINVAL;
-
-done:
-	if (intel_encoder->base.crtc)
-		intel_crtc_restore_mode(intel_encoder->base.crtc);
-
-	return 0;
-}
-
-static int
 intel_dp_connector_register(struct drm_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
@@ -5057,19 +4971,21 @@ static const struct drm_connector_funcs intel_dp_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.force = intel_dp_force,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-	.set_property = intel_dp_set_property,
-	.atomic_get_property = intel_connector_atomic_get_property,
+	.set_property = drm_atomic_helper_connector_set_property,
+	.atomic_get_property = intel_digital_connector_atomic_get_property,
+	.atomic_set_property = intel_digital_connector_atomic_set_property,
 	.late_register = intel_dp_connector_register,
 	.early_unregister = intel_dp_connector_unregister,
 	.destroy = intel_dp_connector_destroy,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
 };
 
 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
 	.detect_ctx = intel_dp_detect,
 	.get_modes = intel_dp_get_modes,
 	.mode_valid = intel_dp_mode_valid,
+	.atomic_check = intel_digital_connector_atomic_check,
 };
 
 static const struct drm_encoder_funcs intel_dp_enc_funcs = {
@@ -5165,7 +5081,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
 {
 	intel_attach_force_audio_property(connector);
 	intel_attach_broadcast_rgb_property(connector);
-	intel_dp->color_range_auto = true;
 }
 
 static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
@@ -5905,7 +5820,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	if (!HAS_GMCH_DISPLAY(dev_priv))
 		allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER);
 
-	intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
 	connector->state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
 	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode, allowed_scalers);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 14bf8f6399f3..33465619cc36 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -266,7 +266,6 @@ struct intel_encoder {
 struct intel_panel {
 	struct drm_display_mode *fixed_mode;
 	struct drm_display_mode *downclock_mode;
-	int fitting_mode;
 
 	/* backlight */
 	struct {
@@ -959,9 +958,6 @@ struct intel_dp {
 	bool detect_done;
 	bool channel_eq_status;
 	bool reset_link_params;
-	enum hdmi_force_audio force_audio;
-	bool limited_color_range;
-	bool color_range_auto;
 	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
 	uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
 	uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-04-25 11:55 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-25 11:55 [PATCH v5 00/11] drm/i915: Convert connector properties to atomic Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 01/11] drm/atomic: Handle aspect ratio and scaling mode in core, v3 Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 02/11] drm/core: Allow attaching custom scaling mode properties Maarten Lankhorst
2017-04-25 15:14   ` Sean Paul
2017-04-25 16:03   ` Ville Syrjälä
2017-04-25 11:55 ` [PATCH v5 03/11] drm/i915: Use per-connector scaling mode property Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 04/11] drm/i915: Add plumbing for digital connector state, v3 Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 05/11] drm/i915: Convert DSI connector properties to atomic Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 06/11] drm/i915: Convert LVDS " Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 07/11] drm/i915: Make intel_dp->has_audio reflect hw state only Maarten Lankhorst
2017-04-25 11:55 ` Maarten Lankhorst [this message]
2017-04-25 11:55 ` [PATCH v5 09/11] drm/i915: Convert intel_hdmi connector properties to atomic Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 10/11] drm/i915: Handle force_audio correctly in intel_sdvo Maarten Lankhorst
2017-04-25 11:55 ` [PATCH v5 11/11] drm/i915: Convert intel_sdvo connector properties to atomic Maarten Lankhorst
2017-04-25 12:15 ` ✗ Fi.CI.BAT: warning for drm/i915: Convert connector properties to atomic. (rev6) Patchwork
2017-04-26  6:23 ` Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1493121335-18603-9-git-send-email-maarten.lankhorst@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.