All of lore.kernel.org
 help / color / mirror / Atom feed
From: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: sboyd@codeaurora.org, agross@codeaurora.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-remoteproc@vger.kernel.org,
	Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Subject: [PATCH v4 2/4] remoteproc: qcom: refactor mss fw image loading sequence
Date: Mon, 15 May 2017 22:55:42 +0530	[thread overview]
Message-ID: <1494869144-4174-3-git-send-email-akdwived@codeaurora.org> (raw)
In-Reply-To: <1494869144-4174-1-git-send-email-akdwived@codeaurora.org>

This patch refactor code to first load all firmware blobs
and then update modem proc to authenticate and boot fw.
Also make a trivial change in a error log.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_pil.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 8fd697a..2626954 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -466,9 +466,10 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 
 	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_META_DATA_AUTH_SUCCESS, 1000);
 	if (ret == -ETIMEDOUT)
-		dev_err(qproc->dev, "MPSS header authentication timed out\n");
+		dev_err(qproc->dev, "metadata authentication timed out\n");
 	else if (ret < 0)
-		dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret);
+		dev_err(qproc->dev,
+			"metadata authentication failed: %d\n", ret);
 
 	dma_free_attrs(qproc->dev, fw->size, ptr, phys, dma_attrs);
 
@@ -503,7 +504,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	bool relocate = false;
 	char seg_name[10];
 	ssize_t offset;
-	size_t size;
+	size_t size = 0;
 	void *ptr;
 	int ret;
 	int i;
@@ -541,7 +542,9 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	}
 
 	mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
-
+	/* Load firmware completely before letting mss to start
+	 * authentication and then boot firmware
+	 */
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		phdr = &phdrs[i];
 
@@ -574,17 +577,13 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			memset(ptr + phdr->p_filesz, 0,
 			       phdr->p_memsz - phdr->p_filesz);
 		}
-
-		size = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
-		if (!size) {
-			boot_addr = relocate ? qproc->mpss_phys : min_addr;
-			writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
-			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
-		}
-
 		size += phdr->p_memsz;
-		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
 	}
+	/* Transfer ownership of modem region with modem fw */
+	boot_addr = relocate ? qproc->mpss_phys : min_addr;
+	writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
+	writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
+	writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
 
 	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
 	if (ret == -ETIMEDOUT)
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2017-05-15 17:25 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-15 17:25 [PATCH v4 0/4] Add new SCM call for stage two mem translation and enable mss rproc on msm8996 Avaneesh Kumar Dwivedi
2017-05-15 17:25 ` [PATCH v4 1/4] firmware: scm: Add support for shared access of a memory Avaneesh Kumar Dwivedi
2017-05-15 22:32   ` kbuild test robot
2017-05-15 22:32     ` kbuild test robot
2017-05-15 22:32     ` kbuild test robot
2017-05-15 17:25 ` Avaneesh Kumar Dwivedi [this message]
2017-05-15 17:25 ` [PATCH v4 3/4] remoteproc: qcom: Add new secure monitor call for access Avaneesh Kumar Dwivedi
2017-05-15 17:25 ` [PATCH v4 4/4] remoteproc: qcom: Add support for mss boot on msm8996 Avaneesh Kumar Dwivedi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494869144-4174-3-git-send-email-akdwived@codeaurora.org \
    --to=akdwived@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.