All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: linus.walleij@linaro.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] pinctrl: meson-gxl: Add SPI pins for the SPICC controller
Date: Mon, 22 May 2017 14:59:25 +0200	[thread overview]
Message-ID: <1495457966-2359-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1495457966-2359-1-git-send-email-narmstrong@baylibre.com>

The SPICC controller has dedicated SPI pins, this patchs add the pins
definition in the GXL pinctrl driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 998210e..719ff1b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -141,6 +141,11 @@
 static const unsigned int nor_c_pins[]		= { PIN(BOOT_13, EE_OFF) };
 static const unsigned int nor_cs_pins[]		= { PIN(BOOT_15, EE_OFF) };
 
+static const unsigned int spi_mosi_pins[]	= { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int spi_miso_pins[]	= { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int spi_ss0_pins[]	= { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int spi_sclk_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+
 static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
 static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
 static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
@@ -405,6 +410,10 @@
 	GROUP(pwm_a,		5,	25),
 	GROUP(pwm_e,		5,	15),
 	GROUP(pwm_f_x,		5,	14),
+	GROUP(spi_mosi,		5,	3),
+	GROUP(spi_miso,		5,	2),
+	GROUP(spi_ss0,		5,	1),
+	GROUP(spi_sclk,		5,	0),
 
 	/* Bank Z */
 	GROUP(eth_mdio,		4,	23),
@@ -560,6 +569,10 @@
 	"nor_d", "nor_q", "nor_c", "nor_cs",
 };
 
+static const char * const spi_groups[] = {
+	"spi_mosi", "spi_miso", "spi_ss0", "spi_sclk",
+};
+
 static const char * const sdcard_groups[] = {
 	"sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
 	"sdcard_cmd", "sdcard_clk",
@@ -693,6 +706,7 @@
 	FUNCTION(gpio_periphs),
 	FUNCTION(emmc),
 	FUNCTION(nor),
+	FUNCTION(spi),
 	FUNCTION(sdcard),
 	FUNCTION(sdio),
 	FUNCTION(nand),
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] pinctrl: meson-gxl: Add SPI pins for the SPICC controller
Date: Mon, 22 May 2017 14:59:25 +0200	[thread overview]
Message-ID: <1495457966-2359-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1495457966-2359-1-git-send-email-narmstrong@baylibre.com>

The SPICC controller has dedicated SPI pins, this patchs add the pins
definition in the GXL pinctrl driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 998210e..719ff1b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -141,6 +141,11 @@
 static const unsigned int nor_c_pins[]		= { PIN(BOOT_13, EE_OFF) };
 static const unsigned int nor_cs_pins[]		= { PIN(BOOT_15, EE_OFF) };
 
+static const unsigned int spi_mosi_pins[]	= { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int spi_miso_pins[]	= { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int spi_ss0_pins[]	= { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int spi_sclk_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+
 static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
 static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
 static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
@@ -405,6 +410,10 @@
 	GROUP(pwm_a,		5,	25),
 	GROUP(pwm_e,		5,	15),
 	GROUP(pwm_f_x,		5,	14),
+	GROUP(spi_mosi,		5,	3),
+	GROUP(spi_miso,		5,	2),
+	GROUP(spi_ss0,		5,	1),
+	GROUP(spi_sclk,		5,	0),
 
 	/* Bank Z */
 	GROUP(eth_mdio,		4,	23),
@@ -560,6 +569,10 @@
 	"nor_d", "nor_q", "nor_c", "nor_cs",
 };
 
+static const char * const spi_groups[] = {
+	"spi_mosi", "spi_miso", "spi_ss0", "spi_sclk",
+};
+
 static const char * const sdcard_groups[] = {
 	"sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
 	"sdcard_cmd", "sdcard_clk",
@@ -693,6 +706,7 @@
 	FUNCTION(gpio_periphs),
 	FUNCTION(emmc),
 	FUNCTION(nor),
+	FUNCTION(spi),
 	FUNCTION(sdcard),
 	FUNCTION(sdio),
 	FUNCTION(nand),
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 1/2] pinctrl: meson-gxl: Add SPI pins for the SPICC controller
Date: Mon, 22 May 2017 14:59:25 +0200	[thread overview]
Message-ID: <1495457966-2359-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1495457966-2359-1-git-send-email-narmstrong@baylibre.com>

The SPICC controller has dedicated SPI pins, this patchs add the pins
definition in the GXL pinctrl driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 998210e..719ff1b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -141,6 +141,11 @@
 static const unsigned int nor_c_pins[]		= { PIN(BOOT_13, EE_OFF) };
 static const unsigned int nor_cs_pins[]		= { PIN(BOOT_15, EE_OFF) };
 
+static const unsigned int spi_mosi_pins[]	= { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int spi_miso_pins[]	= { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int spi_ss0_pins[]	= { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int spi_sclk_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+
 static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
 static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
 static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
@@ -405,6 +410,10 @@
 	GROUP(pwm_a,		5,	25),
 	GROUP(pwm_e,		5,	15),
 	GROUP(pwm_f_x,		5,	14),
+	GROUP(spi_mosi,		5,	3),
+	GROUP(spi_miso,		5,	2),
+	GROUP(spi_ss0,		5,	1),
+	GROUP(spi_sclk,		5,	0),
 
 	/* Bank Z */
 	GROUP(eth_mdio,		4,	23),
@@ -560,6 +569,10 @@
 	"nor_d", "nor_q", "nor_c", "nor_cs",
 };
 
+static const char * const spi_groups[] = {
+	"spi_mosi", "spi_miso", "spi_ss0", "spi_sclk",
+};
+
 static const char * const sdcard_groups[] = {
 	"sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
 	"sdcard_cmd", "sdcard_clk",
@@ -693,6 +706,7 @@
 	FUNCTION(gpio_periphs),
 	FUNCTION(emmc),
 	FUNCTION(nor),
+	FUNCTION(spi),
 	FUNCTION(sdcard),
 	FUNCTION(sdio),
 	FUNCTION(nand),
-- 
1.9.1

  reply	other threads:[~2017-05-22 12:59 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-22 12:59 [PATCH 0/2] pinctrl: meson: Add SPICC pins Neil Armstrong
2017-05-22 12:59 ` Neil Armstrong
2017-05-22 12:59 ` Neil Armstrong
2017-05-22 12:59 ` Neil Armstrong [this message]
2017-05-22 12:59   ` [PATCH 1/2] pinctrl: meson-gxl: Add SPI pins for the SPICC controller Neil Armstrong
2017-05-22 12:59   ` Neil Armstrong
2017-05-29  8:13   ` Linus Walleij
2017-05-29  8:13     ` Linus Walleij
2017-05-29  8:13     ` Linus Walleij
2017-05-29  8:13     ` Linus Walleij
2017-05-22 12:59 ` [PATCH 2/2] pinctrl: meson-gxbb: Add SPI pins for " Neil Armstrong
2017-05-22 12:59   ` Neil Armstrong
2017-05-22 12:59   ` Neil Armstrong
2017-05-29  8:14   ` Linus Walleij
2017-05-29  8:14     ` Linus Walleij
2017-05-29  8:14     ` Linus Walleij
2017-05-29  8:14     ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495457966-2359-2-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.