From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
Date: Tue, 23 May 2017 16:21:50 +0200 [thread overview]
Message-ID: <1495549311-23660-3-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1495549311-23660-1-git-send-email-narmstrong@baylibre.com>
The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.
Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 4871ce5..57fe1f5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -239,7 +239,7 @@
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
Date: Tue, 23 May 2017 16:21:50 +0200 [thread overview]
Message-ID: <1495549311-23660-3-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1495549311-23660-1-git-send-email-narmstrong@baylibre.com>
The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.
Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 4871ce5..57fe1f5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -239,7 +239,7 @@
gpio: bank at 4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
Date: Tue, 23 May 2017 16:21:50 +0200 [thread overview]
Message-ID: <1495549311-23660-3-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1495549311-23660-1-git-send-email-narmstrong@baylibre.com>
The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.
Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 4871ce5..57fe1f5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -239,7 +239,7 @@
gpio: bank at 4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
--
1.9.1
next prev parent reply other threads:[~2017-05-23 14:22 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-23 14:21 [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-24 8:39 ` Jerome Brunet
2017-05-24 8:39 ` Jerome Brunet
2017-05-24 8:39 ` Jerome Brunet
2017-05-24 8:39 ` Jerome Brunet
2017-05-23 14:21 ` Neil Armstrong [this message]
2017-05-23 14:21 ` [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-24 8:39 ` Jerome Brunet
2017-05-24 8:39 ` Jerome Brunet
2017-05-24 8:39 ` Jerome Brunet
2017-05-23 14:21 ` [PATCH 3/3] ARM64: dts: Fix GXBB " Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-24 8:40 ` Jerome Brunet
2017-05-24 8:40 ` Jerome Brunet
2017-05-24 8:40 ` Jerome Brunet
2017-05-24 8:40 ` Jerome Brunet
2017-05-30 22:07 ` [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes Kevin Hilman
2017-05-30 22:07 ` Kevin Hilman
2017-05-30 22:07 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495549311-23660-3-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.