From: William Wu <william.wu@rock-chips.com> To: heiko@sntech.de Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, frank.wang@rock-chips.com, huangtao@rock-chips.com, daniel.meng@rock-chips.com, william.wu@rock-chips.com Subject: [PATCH v2 2/2] arm64: dts: rockchip: enable usb2 for RK3328 evaluation board Date: Fri, 16 Jun 2017 18:34:15 +0800 [thread overview] Message-ID: <1497609255-15724-3-git-send-email-william.wu@rock-chips.com> (raw) In-Reply-To: <1497609255-15724-1-git-send-email-william.wu@rock-chips.com> Rockchip's RK3328 evaluation board has one usb2 otg controller and one usb2 host controller which consist of EHCI and OHCI. Each usb controller connects with one usb2 phy port through UTMI+ interface. Let's enable them to support usb2 on RK3328 evaluation board. Signed-off-by: William Wu <william.wu@rock-chips.com> --- Changes in v2: - None arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index cf27239..da02bb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -55,3 +55,28 @@ &uart2 { status = "okay"; }; + +&u2phy { + status = "okay"; + + u2phy_otg: otg-port { + status = "okay"; + }; + + u2phy_host: host-port { + status = "okay"; + }; + +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; -- 2.0.0
WARNING: multiple messages have this Message-ID (diff)
From: william.wu@rock-chips.com (William Wu) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 2/2] arm64: dts: rockchip: enable usb2 for RK3328 evaluation board Date: Fri, 16 Jun 2017 18:34:15 +0800 [thread overview] Message-ID: <1497609255-15724-3-git-send-email-william.wu@rock-chips.com> (raw) In-Reply-To: <1497609255-15724-1-git-send-email-william.wu@rock-chips.com> Rockchip's RK3328 evaluation board has one usb2 otg controller and one usb2 host controller which consist of EHCI and OHCI. Each usb controller connects with one usb2 phy port through UTMI+ interface. Let's enable them to support usb2 on RK3328 evaluation board. Signed-off-by: William Wu <william.wu@rock-chips.com> --- Changes in v2: - None arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index cf27239..da02bb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -55,3 +55,28 @@ &uart2 { status = "okay"; }; + +&u2phy { + status = "okay"; + + u2phy_otg: otg-port { + status = "okay"; + }; + + u2phy_host: host-port { + status = "okay"; + }; + +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; -- 2.0.0
next prev parent reply other threads:[~2017-06-16 10:34 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-06-16 10:34 [PATCH v2 0/2] Add usb2 nodes on RK3328 SoCs and enable usb2 on RK3328 evb William Wu 2017-06-16 10:34 ` William Wu 2017-06-16 10:34 ` William Wu 2017-06-16 10:34 ` [PATCH v2 1/2] arm64: dts: rockchip: add usb2 nodes for RK3328 SoCs William Wu 2017-06-16 10:34 ` William Wu 2017-06-16 10:34 ` William Wu 2017-06-16 10:34 ` William Wu [this message] 2017-06-16 10:34 ` [PATCH v2 2/2] arm64: dts: rockchip: enable usb2 for RK3328 evaluation board William Wu 2017-06-30 20:29 ` [PATCH v2 0/2] Add usb2 nodes on RK3328 SoCs and enable usb2 on RK3328 evb Heiko Stuebner 2017-06-30 20:29 ` Heiko Stuebner 2017-06-30 20:29 ` Heiko Stuebner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1497609255-15724-3-git-send-email-william.wu@rock-chips.com \ --to=william.wu@rock-chips.com \ --cc=daniel.meng@rock-chips.com \ --cc=devicetree@vger.kernel.org \ --cc=frank.wang@rock-chips.com \ --cc=heiko@sntech.de \ --cc=huangtao@rock-chips.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux@armlinux.org.uk \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.