From: Jeffy Chen <jeffy.chen@rock-chips.com> To: linux-kernel@vger.kernel.org Cc: tfiga@chromium.org, briannorris@chromium.org, heiko@sntech.de, dianders@chromium.org, Jeffy Chen <jeffy.chen@rock-chips.com>, linux-rockchip@lists.infradead.org, Linus Walleij <linus.walleij@linaro.org>, linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [RFC PATCH] pinctrl: rockchip: add irq_shutdown Date: Fri, 23 Jun 2017 21:03:39 +0800 [thread overview] Message-ID: <1498223019-9123-1-git-send-email-jeffy.chen@rock-chips.com> (raw) Currently the rockchip pinctrl driver would try to enable/disable the gpio bank clk when enable/disable an irq. So when the irq core trying to shutdown an already disabled irq, it would result in unbalanced clk disable request: [ 35.911955] WARNING: at drivers/clk/clk.c:680 ... [ 37.272271] Call trace: [ 37.274729] [<ffffffc0007ac270>] clk_core_disable+0x28/0x194 [ 37.280395] [<ffffffc0007ac6a8>] clk_disable+0x34/0x48 [ 37.285544] [<ffffffc0004f3bf0>] rockchip_irq_disable+0x30/0x3c [ 37.291472] [<ffffffc00027a7e0>] __irq_disable+0x40/0x64 [ 37.296791] [<ffffffc00027a86c>] irq_shutdown+0x68/0x8c [ 37.302023] [<ffffffc0002777fc>] __free_irq+0x110/0x218 [ 37.307254] [<ffffffc0002779a8>] free_irq+0x54/0x64 [ 37.312138] [<ffffffc00027ba24>] devm_irq_release+0x24/0x30 Add an irq_shutdown callback, and do a sanity check for irq state to prevent that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> --- drivers/pinctrl/pinctrl-rockchip.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 607f52c..b0e3130 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -2551,6 +2551,12 @@ static void rockchip_irq_disable(struct irq_data *d) clk_disable(bank->clk); } +static void rockchip_irq_shutdown(struct irq_data *d) +{ + if (!irqd_irq_disabled(d)) + rockchip_irq_disable(d); +} + static void rockchip_irq_bus_lock(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); @@ -2641,6 +2647,7 @@ static int rockchip_interrupts_register(struct platform_device *pdev, gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit; gc->chip_types[0].chip.irq_enable = rockchip_irq_enable; gc->chip_types[0].chip.irq_disable = rockchip_irq_disable; + gc->chip_types[0].chip.irq_shutdown = rockchip_irq_shutdown; gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: jeffy.chen@rock-chips.com (Jeffy Chen) To: linux-arm-kernel@lists.infradead.org Subject: [RFC PATCH] pinctrl: rockchip: add irq_shutdown Date: Fri, 23 Jun 2017 21:03:39 +0800 [thread overview] Message-ID: <1498223019-9123-1-git-send-email-jeffy.chen@rock-chips.com> (raw) Currently the rockchip pinctrl driver would try to enable/disable the gpio bank clk when enable/disable an irq. So when the irq core trying to shutdown an already disabled irq, it would result in unbalanced clk disable request: [ 35.911955] WARNING: at drivers/clk/clk.c:680 ... [ 37.272271] Call trace: [ 37.274729] [<ffffffc0007ac270>] clk_core_disable+0x28/0x194 [ 37.280395] [<ffffffc0007ac6a8>] clk_disable+0x34/0x48 [ 37.285544] [<ffffffc0004f3bf0>] rockchip_irq_disable+0x30/0x3c [ 37.291472] [<ffffffc00027a7e0>] __irq_disable+0x40/0x64 [ 37.296791] [<ffffffc00027a86c>] irq_shutdown+0x68/0x8c [ 37.302023] [<ffffffc0002777fc>] __free_irq+0x110/0x218 [ 37.307254] [<ffffffc0002779a8>] free_irq+0x54/0x64 [ 37.312138] [<ffffffc00027ba24>] devm_irq_release+0x24/0x30 Add an irq_shutdown callback, and do a sanity check for irq state to prevent that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> --- drivers/pinctrl/pinctrl-rockchip.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 607f52c..b0e3130 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -2551,6 +2551,12 @@ static void rockchip_irq_disable(struct irq_data *d) clk_disable(bank->clk); } +static void rockchip_irq_shutdown(struct irq_data *d) +{ + if (!irqd_irq_disabled(d)) + rockchip_irq_disable(d); +} + static void rockchip_irq_bus_lock(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); @@ -2641,6 +2647,7 @@ static int rockchip_interrupts_register(struct platform_device *pdev, gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit; gc->chip_types[0].chip.irq_enable = rockchip_irq_enable; gc->chip_types[0].chip.irq_disable = rockchip_irq_disable; + gc->chip_types[0].chip.irq_shutdown = rockchip_irq_shutdown; gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; -- 2.1.4
next reply other threads:[~2017-06-23 13:03 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-06-23 13:03 Jeffy Chen [this message] 2017-06-23 13:03 ` [RFC PATCH] pinctrl: rockchip: add irq_shutdown Jeffy Chen 2017-06-29 22:05 ` Brian Norris 2017-06-29 22:05 ` Brian Norris 2017-06-30 1:24 ` jeffy 2017-06-30 1:24 ` jeffy 2017-06-30 1:29 ` Brian Norris 2017-06-30 1:29 ` Brian Norris
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1498223019-9123-1-git-send-email-jeffy.chen@rock-chips.com \ --to=jeffy.chen@rock-chips.com \ --cc=briannorris@chromium.org \ --cc=dianders@chromium.org \ --cc=heiko@sntech.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=tfiga@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.