From: Bich HEMON <bich.hemon@st.com> To: Russell King <linux@armlinux.org.uk>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre TORGUE <alexandre.torgue@st.com>, Gerald BAEZA <gerald.baeza@st.com>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Cc: Bich HEMON <bich.hemon@st.com> Subject: [PATCH] ARM: stm32: debug: add low-level debug support Date: Thu, 27 Jul 2017 16:50:20 +0000 [thread overview] Message-ID: <1501174209-27550-2-git-send-email-bich.hemon@st.com> (raw) In-Reply-To: <1501174209-27550-1-git-send-email-bich.hemon@st.com> From: Gerald Baeza <gerald.baeza@st.com> This adds low-level debug support on USART1 for STM32F4 and STM32F7. Compiled via 'CONFIG_DEBUG_LL' and 'CONFIG_EARLY_PRINTK'. Enabled via 'earlyprintk' in bootargs. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> --- arch/arm/Kconfig.debug | 27 +++++++++++++++++++++++++++ arch/arm/include/debug/stm32.S | 41 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/include/debug/stm32.S diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 447629d..0b6e61e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1126,6 +1126,28 @@ choice If unsure, say N. + config STM32F4_DEBUG_UART + bool "Use STM32F4 UART for low-level debug" + depends on ARCH_STM32 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F4 based platforms, which default UART is wired on + USART1. + + If unsure, say N. + + config STM32F7_DEBUG_UART + bool "Use STM32F7 UART for low-level debug" + depends on ARCH_STM32 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F7 based platforms, which default UART is wired on + USART1. + + If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -1410,6 +1432,10 @@ config DEBUG_STI_UART bool depends on ARCH_STI +config DEBUG_STM32_UART + bool + depends on ARCH_STM32 + config DEBUG_SIRFSOC_UART bool depends on ARCH_SIRF @@ -1457,6 +1483,7 @@ config DEBUG_LL_INCLUDE default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART + default "debug/stm32.S" if DEBUG_STM32_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S new file mode 100644 index 0000000..1e060a5 --- /dev/null +++ b/arch/arm/include/debug/stm32.S @@ -0,0 +1,41 @@ +/* + * Copyright (C) STMicroelectronics SA 2017 + * Author: Gerald Baeza <gerald.baeza@st.com> + * License terms: GNU General Public License (GPL), version 2 + */ + +#define STM32_UART_BASE 0x40011000 /* USART1 */ + +#ifdef CONFIG_STM32F4_DEBUG_UART +#define STM32_USART_SR_OFF 0x00 +#define STM32_USART_TDR_OFF 0x04 +#endif + +#ifdef CONFIG_STM32F7_DEBUG_UART +#define STM32_USART_SR_OFF 0x1C +#define STM32_USART_TDR_OFF 0x28 +#endif + +#define STM32_USART_TC (1 << 6) /* Tx complete */ +#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */ + + .macro addruart, rp, rv, tmp + ldr \rp, =STM32_UART_BASE @ physical base + ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */ + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #STM32_USART_TDR_OFF] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register + tst \rd, #STM32_USART_TXE @ TXE = 1 = tx empty + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register + tst \rd, #STM32_USART_TC @ TC = 1 = tx complete + beq 1001b + .endm -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: bich.hemon@st.com (Bich HEMON) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: stm32: debug: add low-level debug support Date: Thu, 27 Jul 2017 16:50:20 +0000 [thread overview] Message-ID: <1501174209-27550-2-git-send-email-bich.hemon@st.com> (raw) In-Reply-To: <1501174209-27550-1-git-send-email-bich.hemon@st.com> From: Gerald Baeza <gerald.baeza@st.com> This adds low-level debug support on USART1 for STM32F4 and STM32F7. Compiled via 'CONFIG_DEBUG_LL' and 'CONFIG_EARLY_PRINTK'. Enabled via 'earlyprintk' in bootargs. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> --- arch/arm/Kconfig.debug | 27 +++++++++++++++++++++++++++ arch/arm/include/debug/stm32.S | 41 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/include/debug/stm32.S diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 447629d..0b6e61e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1126,6 +1126,28 @@ choice If unsure, say N. + config STM32F4_DEBUG_UART + bool "Use STM32F4 UART for low-level debug" + depends on ARCH_STM32 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F4 based platforms, which default UART is wired on + USART1. + + If unsure, say N. + + config STM32F7_DEBUG_UART + bool "Use STM32F7 UART for low-level debug" + depends on ARCH_STM32 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F7 based platforms, which default UART is wired on + USART1. + + If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -1410,6 +1432,10 @@ config DEBUG_STI_UART bool depends on ARCH_STI +config DEBUG_STM32_UART + bool + depends on ARCH_STM32 + config DEBUG_SIRFSOC_UART bool depends on ARCH_SIRF @@ -1457,6 +1483,7 @@ config DEBUG_LL_INCLUDE default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART + default "debug/stm32.S" if DEBUG_STM32_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S new file mode 100644 index 0000000..1e060a5 --- /dev/null +++ b/arch/arm/include/debug/stm32.S @@ -0,0 +1,41 @@ +/* + * Copyright (C) STMicroelectronics SA 2017 + * Author: Gerald Baeza <gerald.baeza@st.com> + * License terms: GNU General Public License (GPL), version 2 + */ + +#define STM32_UART_BASE 0x40011000 /* USART1 */ + +#ifdef CONFIG_STM32F4_DEBUG_UART +#define STM32_USART_SR_OFF 0x00 +#define STM32_USART_TDR_OFF 0x04 +#endif + +#ifdef CONFIG_STM32F7_DEBUG_UART +#define STM32_USART_SR_OFF 0x1C +#define STM32_USART_TDR_OFF 0x28 +#endif + +#define STM32_USART_TC (1 << 6) /* Tx complete */ +#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */ + + .macro addruart, rp, rv, tmp + ldr \rp, =STM32_UART_BASE @ physical base + ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */ + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #STM32_USART_TDR_OFF] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register + tst \rd, #STM32_USART_TXE @ TXE = 1 = tx empty + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register + tst \rd, #STM32_USART_TC @ TC = 1 = tx complete + beq 1001b + .endm -- 1.9.1
next prev parent reply other threads:[~2017-07-27 16:51 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-07-27 16:50 [PATCH] Add support for low-level debug on STM32 Bich HEMON 2017-07-27 16:50 ` Bich HEMON 2017-07-27 16:50 ` Bich HEMON [this message] 2017-07-27 16:50 ` [PATCH] ARM: stm32: debug: add low-level debug support Bich HEMON 2018-11-12 18:22 ` Olof Johansson 2018-11-12 18:22 ` Olof Johansson 2018-11-13 9:16 ` Bich HEMON 2018-11-13 9:16 ` Bich HEMON 2018-11-13 9:24 ` Russell King - ARM Linux 2018-11-13 9:24 ` Russell King - ARM Linux 2018-11-13 10:16 ` Bich HEMON 2018-11-13 10:16 ` Bich HEMON 2018-11-13 19:02 ` Olof Johansson 2018-11-13 19:02 ` Olof Johansson 2018-11-14 10:20 ` Bich HEMON 2018-11-14 10:20 ` Bich HEMON
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1501174209-27550-2-git-send-email-bich.hemon@st.com \ --to=bich.hemon@st.com \ --cc=alexandre.torgue@st.com \ --cc=gerald.baeza@st.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mcoquelin.stm32@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.