From: <honghui.zhang@mediatek.com>
To: <joro@8bytes.org>, <matthias.bgg@gmail.com>, <robh@kernel.org>,
<robin.murphy@arm.com>
Cc: <devicetree@vger.kernel.org>, <kendrick.hsu@mediatek.com>,
<srv_heupstream@mediatek.com>, <will.deacon@arm.com>,
<linux-kernel@vger.kernel.org>,
<iommu@lists.linux-foundation.org>, <robh+dt@kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>, <youlin.pei@mediatek.com>,
<erin.lo@mediatek.com>, <yong.wu@mediatek.com>,
<xinping.qian@mediatek.com>,
Honghui Zhang <honghui.zhang@mediatek.com>
Subject: [PATCH v2 3/3] arm: dts: mediatek: add larbid property for larb
Date: Fri, 28 Jul 2017 18:55:43 +0800 [thread overview]
Message-ID: <1501239343-9190-4-git-send-email-honghui.zhang@mediatek.com> (raw)
In-Reply-To: <1501239343-9190-1-git-send-email-honghui.zhang@mediatek.com>
From: Honghui Zhang <honghui.zhang@mediatek.com>
Add mediatek's hardware id information for smi larb.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index f1efdc6..2cddbec 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -533,6 +533,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <0>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
@@ -549,6 +550,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x15001000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <2>;
clocks = <&imgsys CLK_IMG_SMI_COMM>,
<&imgsys CLK_IMG_SMI_COMM>;
clock-names = "apb", "smi";
@@ -579,6 +581,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <1>;
clocks = <&vdecsys CLK_VDEC_CKGEN>,
<&vdecsys CLK_VDEC_LARB>;
clock-names = "apb", "smi";
--
2.6.4
WARNING: multiple messages have this Message-ID (diff)
From: <honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robin.murphy-5wv7dgnIgG8@public.gmane.org
Cc: youlin.pei-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kendrick.hsu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
xinping.qian-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v2 3/3] arm: dts: mediatek: add larbid property for larb
Date: Fri, 28 Jul 2017 18:55:43 +0800 [thread overview]
Message-ID: <1501239343-9190-4-git-send-email-honghui.zhang@mediatek.com> (raw)
In-Reply-To: <1501239343-9190-1-git-send-email-honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Honghui Zhang <honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add mediatek's hardware id information for smi larb.
Signed-off-by: Honghui Zhang <honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt2701.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index f1efdc6..2cddbec 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -533,6 +533,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <0>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
@@ -549,6 +550,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x15001000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <2>;
clocks = <&imgsys CLK_IMG_SMI_COMM>,
<&imgsys CLK_IMG_SMI_COMM>;
clock-names = "apb", "smi";
@@ -579,6 +581,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <1>;
clocks = <&vdecsys CLK_VDEC_CKGEN>,
<&vdecsys CLK_VDEC_LARB>;
clock-names = "apb", "smi";
--
2.6.4
WARNING: multiple messages have this Message-ID (diff)
From: honghui.zhang@mediatek.com (honghui.zhang at mediatek.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] arm: dts: mediatek: add larbid property for larb
Date: Fri, 28 Jul 2017 18:55:43 +0800 [thread overview]
Message-ID: <1501239343-9190-4-git-send-email-honghui.zhang@mediatek.com> (raw)
In-Reply-To: <1501239343-9190-1-git-send-email-honghui.zhang@mediatek.com>
From: Honghui Zhang <honghui.zhang@mediatek.com>
Add mediatek's hardware id information for smi larb.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index f1efdc6..2cddbec 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -533,6 +533,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <0>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
@@ -549,6 +550,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x15001000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <2>;
clocks = <&imgsys CLK_IMG_SMI_COMM>,
<&imgsys CLK_IMG_SMI_COMM>;
clock-names = "apb", "smi";
@@ -579,6 +581,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larbid = <1>;
clocks = <&vdecsys CLK_VDEC_CKGEN>,
<&vdecsys CLK_VDEC_LARB>;
clock-names = "apb", "smi";
--
2.6.4
next prev parent reply other threads:[~2017-07-28 10:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 10:55 [PATCH v2 0/3] Add larbid init routine for mediatek's gen1 smi larb driver honghui.zhang
2017-07-28 10:55 ` honghui.zhang at mediatek.com
2017-07-28 10:55 ` honghui.zhang-NuS5LvNUpcJWk0Htik3J/w
2017-07-28 10:55 ` [PATCH v2 1/3] memory: mtk-smi: add larbid handle routine honghui.zhang
2017-07-28 10:55 ` honghui.zhang at mediatek.com
2017-07-28 10:55 ` honghui.zhang
2017-07-31 9:32 ` Matthias Brugger
2017-07-31 9:32 ` Matthias Brugger
2017-07-31 9:32 ` Matthias Brugger
2017-07-28 10:55 ` [PATCH v2 2/3] dt-bindings: mediatek: add descriptions for larbid honghui.zhang
2017-07-28 10:55 ` honghui.zhang at mediatek.com
2017-07-28 10:55 ` honghui.zhang-NuS5LvNUpcJWk0Htik3J/w
2017-07-28 10:55 ` honghui.zhang [this message]
2017-07-28 10:55 ` [PATCH v2 3/3] arm: dts: mediatek: add larbid property for larb honghui.zhang at mediatek.com
2017-07-28 10:55 ` honghui.zhang-NuS5LvNUpcJWk0Htik3J/w
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501239343-9190-4-git-send-email-honghui.zhang@mediatek.com \
--to=honghui.zhang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=erin.lo@mediatek.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kendrick.hsu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=will.deacon@arm.com \
--cc=xinping.qian@mediatek.com \
--cc=yong.wu@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.