From: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Vivek Gautam
<vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v2 1/2] Documentation: dt: pinctrl: Add pmi8994 gpio support
Date: Fri, 28 Jul 2017 18:48:12 +0530 [thread overview]
Message-ID: <1501247893-30226-1-git-send-email-vivek.gautam@codeaurora.org> (raw)
Update the binding doc for qcom pmi8994-gpio devices.
Signed-off-by: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
- Have been testing this patch-set on db820c for extcon with
usb controller. The usb controller uses one of these gpios
for usb-id/vbus detection.
Changes since v1:
- Dropped "qcom,pmi8994-gpio" compatible addition to the driver
since we can use the generic "qcom,spmi-gpio" compatible.
- Sorted to add pmi8994-gpio in alphabatical order.
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 8d893a874634..d6f8adbf25c6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -16,6 +16,7 @@ PMIC's from Qualcomm.
"qcom,pm8941-gpio"
"qcom,pm8994-gpio"
"qcom,pma8084-gpio"
+ "qcom,pmi8994-gpio"
And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
if the device is on an spmi bus or an ssbi bus respectively
@@ -85,6 +86,7 @@ to specify in a pin configuration subnode:
gpio1-gpio36 for pm8941
gpio1-gpio22 for pm8994
gpio1-gpio22 for pma8084
+ gpio1-gpio10 for pmi8994
- function:
Usage: required
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: bjorn.andersson@linaro.org, linus.walleij@linaro.org,
robh+dt@kernel.org, andy.gross@linaro.org,
linux-arm-msm@vger.kernel.org
Cc: sboyd@codeaurora.org, rnayak@codeaurora.org,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Vivek Gautam <vivek.gautam@codeaurora.org>
Subject: [PATCH v2 1/2] Documentation: dt: pinctrl: Add pmi8994 gpio support
Date: Fri, 28 Jul 2017 18:48:12 +0530 [thread overview]
Message-ID: <1501247893-30226-1-git-send-email-vivek.gautam@codeaurora.org> (raw)
Update the binding doc for qcom pmi8994-gpio devices.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
- Have been testing this patch-set on db820c for extcon with
usb controller. The usb controller uses one of these gpios
for usb-id/vbus detection.
Changes since v1:
- Dropped "qcom,pmi8994-gpio" compatible addition to the driver
since we can use the generic "qcom,spmi-gpio" compatible.
- Sorted to add pmi8994-gpio in alphabatical order.
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 8d893a874634..d6f8adbf25c6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -16,6 +16,7 @@ PMIC's from Qualcomm.
"qcom,pm8941-gpio"
"qcom,pm8994-gpio"
"qcom,pma8084-gpio"
+ "qcom,pmi8994-gpio"
And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
if the device is on an spmi bus or an ssbi bus respectively
@@ -85,6 +86,7 @@ to specify in a pin configuration subnode:
gpio1-gpio36 for pm8941
gpio1-gpio22 for pm8994
gpio1-gpio22 for pma8084
+ gpio1-gpio10 for pmi8994
- function:
Usage: required
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: vivek.gautam@codeaurora.org (Vivek Gautam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] Documentation: dt: pinctrl: Add pmi8994 gpio support
Date: Fri, 28 Jul 2017 18:48:12 +0530 [thread overview]
Message-ID: <1501247893-30226-1-git-send-email-vivek.gautam@codeaurora.org> (raw)
Update the binding doc for qcom pmi8994-gpio devices.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
- Have been testing this patch-set on db820c for extcon with
usb controller. The usb controller uses one of these gpios
for usb-id/vbus detection.
Changes since v1:
- Dropped "qcom,pmi8994-gpio" compatible addition to the driver
since we can use the generic "qcom,spmi-gpio" compatible.
- Sorted to add pmi8994-gpio in alphabatical order.
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 8d893a874634..d6f8adbf25c6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -16,6 +16,7 @@ PMIC's from Qualcomm.
"qcom,pm8941-gpio"
"qcom,pm8994-gpio"
"qcom,pma8084-gpio"
+ "qcom,pmi8994-gpio"
And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
if the device is on an spmi bus or an ssbi bus respectively
@@ -85,6 +86,7 @@ to specify in a pin configuration subnode:
gpio1-gpio36 for pm8941
gpio1-gpio22 for pm8994
gpio1-gpio22 for pma8084
+ gpio1-gpio10 for pmi8994
- function:
Usage: required
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2017-07-28 13:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 13:18 Vivek Gautam [this message]
2017-07-28 13:18 ` [PATCH v2 1/2] Documentation: dt: pinctrl: Add pmi8994 gpio support Vivek Gautam
2017-07-28 13:18 ` Vivek Gautam
2017-07-28 13:18 ` [PATCH v2 2/2] arm64: dts: pmi8994: Add device node for pmi8994 gpios Vivek Gautam
2017-07-28 13:18 ` Vivek Gautam
2017-07-28 16:14 ` Stephen Boyd
2017-07-28 16:14 ` Stephen Boyd
2017-07-28 16:14 ` [PATCH v2 1/2] Documentation: dt: pinctrl: Add pmi8994 gpio support Stephen Boyd
2017-07-28 16:14 ` Stephen Boyd
2017-08-03 13:31 ` Linus Walleij
2017-08-03 13:31 ` Linus Walleij
2017-08-03 13:31 ` Linus Walleij
2017-08-03 23:06 ` Rob Herring
2017-08-03 23:06 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501247893-30226-1-git-send-email-vivek.gautam@codeaurora.org \
--to=vivek.gautam-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.