From: Jacob Chen <jacob-chen@iotwrt.com> To: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, heiko@sntech.de, robh+dt@kernel.org, mchehab@kernel.org, linux-media@vger.kernel.org, laurent.pinchart+renesas@ideasonboard.com, hans.verkuil@cisco.com, tfiga@chromium.org, nicolas@ndufresne.ca, Jacob Chen <jacob-chen@iotwrt.com>, Yakir Yang <ykk@rock-chips.com> Subject: [PATCH v4 6/6] dt-bindings: Document the Rockchip RGA bindings Date: Mon, 31 Jul 2017 23:33:02 +0800 [thread overview] Message-ID: <1501515182-26705-7-git-send-email-jacob-chen@iotwrt.com> (raw) In-Reply-To: <1501515182-26705-1-git-send-email-jacob-chen@iotwrt.com> Add DT bindings documentation for Rockchip RGA Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> --- .../devicetree/bindings/media/rockchip-rga.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/rockchip-rga.txt diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt new file mode 100644 index 0000000..fd5276a --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -0,0 +1,33 @@ +device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) + +RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D +graphics operations, such as point/line drawing, image scaling, rotation, +BitBLT, alpha blending and image blur/sharpness. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-rga"; + "rockchip,rk3399-rga"; + +- interrupts: RGA interrupt specifier. + +- clocks: phandle to RGA sclk/hclk/aclk clocks + +- clock-names: should be "aclk", "hclk" and "sclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: should be "core", "axi" and "ahb" + +Example: +SoC-specific DT entry: + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core, "axi", "ahb"; + }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: jacob-chen@iotwrt.com (Jacob Chen) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 6/6] dt-bindings: Document the Rockchip RGA bindings Date: Mon, 31 Jul 2017 23:33:02 +0800 [thread overview] Message-ID: <1501515182-26705-7-git-send-email-jacob-chen@iotwrt.com> (raw) In-Reply-To: <1501515182-26705-1-git-send-email-jacob-chen@iotwrt.com> Add DT bindings documentation for Rockchip RGA Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> --- .../devicetree/bindings/media/rockchip-rga.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/rockchip-rga.txt diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt new file mode 100644 index 0000000..fd5276a --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -0,0 +1,33 @@ +device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) + +RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D +graphics operations, such as point/line drawing, image scaling, rotation, +BitBLT, alpha blending and image blur/sharpness. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-rga"; + "rockchip,rk3399-rga"; + +- interrupts: RGA interrupt specifier. + +- clocks: phandle to RGA sclk/hclk/aclk clocks + +- clock-names: should be "aclk", "hclk" and "sclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: should be "core", "axi" and "ahb" + +Example: +SoC-specific DT entry: + rga: rga at ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core, "axi", "ahb"; + }; -- 2.7.4
next prev parent reply other threads:[~2017-07-31 15:34 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-07-31 15:32 [PATCH v4 0/5] Add Rockchip RGA V4l2 support Jacob Chen 2017-07-31 15:32 ` Jacob Chen 2017-07-31 15:32 ` [PATCH v4 1/6] [media] v4l: add portduff blend modes Jacob Chen 2017-07-31 15:32 ` Jacob Chen 2017-07-31 15:32 ` [PATCH v4 2/6] [media] extended-controls.rst: add PorterDuff mode control Jacob Chen 2017-07-31 15:32 ` Jacob Chen 2017-07-31 16:07 ` Hans Verkuil 2017-07-31 16:07 ` Hans Verkuil 2017-07-31 16:07 ` Hans Verkuil 2017-07-31 15:32 ` [PATCH v4 3/6] [media] rockchip/rga: v4l2 m2m support Jacob Chen 2017-07-31 15:32 ` Jacob Chen 2017-07-31 16:18 ` Hans Verkuil 2017-07-31 16:18 ` Hans Verkuil 2017-07-31 16:18 ` Hans Verkuil 2017-08-02 3:15 ` Jacob Chen 2017-08-02 3:15 ` Jacob Chen 2017-07-31 15:33 ` [PATCH v4 4/6] ARM: dts: rockchip: add RGA device node for RK3288 Jacob Chen 2017-07-31 15:33 ` Jacob Chen 2017-07-31 15:33 ` [PATCH v4 5/6] ARM: dts: rockchip: add RGA device node for RK3399 Jacob Chen 2017-07-31 15:33 ` Jacob Chen 2017-07-31 15:33 ` Jacob Chen [this message] 2017-07-31 15:33 ` [PATCH v4 6/6] dt-bindings: Document the Rockchip RGA bindings Jacob Chen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1501515182-26705-7-git-send-email-jacob-chen@iotwrt.com \ --to=jacob-chen@iotwrt.com \ --cc=devicetree@vger.kernel.org \ --cc=hans.verkuil@cisco.com \ --cc=heiko@sntech.de \ --cc=laurent.pinchart+renesas@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mchehab@kernel.org \ --cc=nicolas@ndufresne.ca \ --cc=robh+dt@kernel.org \ --cc=tfiga@chromium.org \ --cc=ykk@rock-chips.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.