[PATCH] staging: iio: trigger: Move header file content to source file

From: Harsha Sharma <harshasharmaiitr@gmail.com>
To: gregkh@linuxfoundation.org, jic23@kernel.org, lars@metafoo.de,
	knaack.h@gmx.de
Cc: linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org, outreachy-kernel@googlegroups.com,
	Harsha Sharma <harshasharmaiitr@gmail.com>
Subject: [PATCH] staging: iio: trigger: Move header file content to source file
Date: Tue, 26 Sep 2017 23:56:15 +0530	[thread overview]
Message-ID: <1506450375-15538-1-git-send-email-harshasharmaiitr@gmail.com> (raw)

The contents of the header file are used only by this single source file.
Moved content into iio-trig-bfin-timer.c and removed iio-trig-bfin-timer.h

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
---
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 20 ++++++++++++++++++-
 drivers/staging/iio/trigger/iio-trig-bfin-timer.h | 24 -----------------------
 2 files changed, 19 insertions(+), 25 deletions(-)
 delete mode 100644 drivers/staging/iio/trigger/iio-trig-bfin-timer.h

diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index d80dcf8..2cedcaf 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -19,7 +19,25 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
 
-#include "iio-trig-bfin-timer.h"
+/**
+ * struct iio_bfin_timer_trigger_pdata - timer trigger platform data
+ * @output_enable: Enable external trigger pulse generation.
+ * @active_low: Whether the trigger pulse is active low.
+ * @duty_ns: Length of the trigger pulse in nanoseconds.
+ *
+ * This struct is used to configure the output pulse generation of the blackfin
+ * timer trigger. If output_enable is set to true an external trigger signal
+ * will generated on the pin corresponding to the timer. This is useful for
+ * converters which needs an external signal to start conversion. active_low and
+ * duty_ns are used to configure the type of the trigger pulse. If output_enable
+ * is set to false no external trigger pulse will be generated and active_low
+ * and duty_ns are ignored.
+ **/
+struct iio_bfin_timer_trigger_pdata {
+	 bool output_enable;
+	 bool active_low;
+	 unsigned int duty_ns;
+};
 
 struct bfin_timer {
 	unsigned short id, bit;
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h b/drivers/staging/iio/trigger/iio-trig-bfin-timer.h
deleted file mode 100644
index c07321f..0000000
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __IIO_BFIN_TIMER_TRIGGER_H__
-#define __IIO_BFIN_TIMER_TRIGGER_H__
-
-/**
- * struct iio_bfin_timer_trigger_pdata - timer trigger platform data
- * @output_enable: Enable external trigger pulse generation.
- * @active_low: Whether the trigger pulse is active low.
- * @duty_ns: Length of the trigger pulse in nanoseconds.
- *
- * This struct is used to configure the output pulse generation of the blackfin
- * timer trigger. If output_enable is set to true an external trigger signal
- * will generated on the pin corresponding to the timer. This is useful for
- * converters which needs an external signal to start conversion. active_low and
- * duty_ns are used to configure the type of the trigger pulse. If output_enable
- * is set to false no external trigger pulse will be generated and active_low
- * and duty_ns are ignored.
- **/
-struct iio_bfin_timer_trigger_pdata {
-	bool output_enable;
-	bool active_low;
-	unsigned int duty_ns;
-};
-
-#endif
-- 
1.9.1


