All of lore.kernel.org
 help / color / mirror / Atom feed
From: <akolli@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <akolli@codeaurora.org>, <linux-wireless@vger.kernel.org>,
	Anilkumar Kolli <akolli@qti.qualcomm.com>
Subject: [PATCH] ath10k: fix sending wmi cmd during the tdls teardown
Date: Thu, 5 Oct 2017 11:42:06 +0530	[thread overview]
Message-ID: <1507183926-711-1-git-send-email-akolli@qti.qualcomm.com> (raw)

From: Anilkumar Kolli <akolli@codeaurora.org>

The current firmware 10.4-3.5.1-00035 on QCA9888 supports
TDLS explicit mode, it expects WMI_TDLS_ENABLE_PASSIVE
for tdls setup and WMI_TDLS_DISABLE for tdls teardown.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 38a97086708b..cad2e42dcef6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -7870,7 +7870,8 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	if (!skb)
 		return ERR_PTR(-ENOMEM);
 
-	if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map))
+	if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map) &&
+	    state == WMI_TDLS_ENABLE_ACTIVE)
 		state = WMI_TDLS_ENABLE_PASSIVE;
 
 	if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <akolli@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: Anilkumar Kolli <akolli@qti.qualcomm.com>,
	akolli@codeaurora.org, linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: fix sending wmi cmd during the tdls teardown
Date: Thu, 5 Oct 2017 11:42:06 +0530	[thread overview]
Message-ID: <1507183926-711-1-git-send-email-akolli@qti.qualcomm.com> (raw)

From: Anilkumar Kolli <akolli@codeaurora.org>

The current firmware 10.4-3.5.1-00035 on QCA9888 supports
TDLS explicit mode, it expects WMI_TDLS_ENABLE_PASSIVE
for tdls setup and WMI_TDLS_DISABLE for tdls teardown.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 38a97086708b..cad2e42dcef6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -7870,7 +7870,8 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	if (!skb)
 		return ERR_PTR(-ENOMEM);
 
-	if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map))
+	if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map) &&
+	    state == WMI_TDLS_ENABLE_ACTIVE)
 		state = WMI_TDLS_ENABLE_PASSIVE;
 
 	if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
-- 
1.7.9.5


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2017-10-05  6:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-05  6:12 akolli [this message]
2017-10-05  6:12 ` [PATCH] ath10k: fix sending wmi cmd during the tdls teardown akolli
2017-10-27 13:48 ` Kalle Valo
2017-10-27 13:48   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507183926-711-1-git-send-email-akolli@qti.qualcomm.com \
    --to=akolli@qti.qualcomm.com \
    --cc=akolli@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.