From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Russell King <linux@armlinux.org.uk> Cc: Simon Horman <horms@verge.net.au>, Geert Uytterhoeven <geert@linux-m68k.org>, Magnus Damm <magnus.damm@gmail.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-renesas-soc@vger.kernel.org, Chris Paterson <Chris.Paterson2@renesas.com>, Biju Das <biju.das@bp.renesas.com>, Fabrizio Castro <fabrizio.castro@bp.renesas.com>, Chris Paterson <chris.paterson2@renesas.com> Subject: [PATCH v2 2/2] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Date: Fri, 6 Oct 2017 18:59:53 +0100 [thread overview] Message-ID: <1507312793-6877-3-git-send-email-fabrizio.castro@bp.renesas.com> (raw) In-Reply-To: <1507312793-6877-1-git-send-email-fabrizio.castro@bp.renesas.com> This patch adds a .dtsi that describes the camera daughter board and a .dts to describe the HW made of iWave's RZ/G1M SoM, iWave's RZ/G1M/G1N Qseven carrier board, and the camera daughter board. The camera daughter board .dtsi adds support for ttySC[14]. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: * Reodered nodes alphabetically arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 43 +++++++++++++++++++++++++ arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 19 +++++++++++ 3 files changed, 63 insertions(+) create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e87f311..8c34d06 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-iwg20d-q7.dtb \ + r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ r8a7745-iwg22d-sodimm.dtb \ r8a7745-sk-rzg1e.dtb \ diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi new file mode 100644 index 0000000..31fab5f --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -0,0 +1,43 @@ +/* + * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial1 = &scif1; + serial4 = &hscif1; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&pfc { + hscif1_pins: hscif1 { + groups = "hscif1_data_c", "hscif1_ctrl_c"; + function = "hscif1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_d"; + function = "scif1"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 0000000..d90eb84 --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: fabrizio.castro@bp.renesas.com (Fabrizio Castro) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 2/2] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Date: Fri, 6 Oct 2017 18:59:53 +0100 [thread overview] Message-ID: <1507312793-6877-3-git-send-email-fabrizio.castro@bp.renesas.com> (raw) In-Reply-To: <1507312793-6877-1-git-send-email-fabrizio.castro@bp.renesas.com> This patch adds a .dtsi that describes the camera daughter board and a .dts to describe the HW made of iWave's RZ/G1M SoM, iWave's RZ/G1M/G1N Qseven carrier board, and the camera daughter board. The camera daughter board .dtsi adds support for ttySC[14]. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: * Reodered nodes alphabetically arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 43 +++++++++++++++++++++++++ arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 19 +++++++++++ 3 files changed, 63 insertions(+) create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e87f311..8c34d06 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-iwg20d-q7.dtb \ + r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ r8a7745-iwg22d-sodimm.dtb \ r8a7745-sk-rzg1e.dtb \ diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi new file mode 100644 index 0000000..31fab5f --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -0,0 +1,43 @@ +/* + * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial1 = &scif1; + serial4 = &hscif1; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&pfc { + hscif1_pins: hscif1 { + groups = "hscif1_data_c", "hscif1_ctrl_c"; + function = "hscif1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_d"; + function = "scif1"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 0000000..d90eb84 --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; +}; -- 2.7.4
next prev parent reply other threads:[~2017-10-06 17:59 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-04 9:18 [PATCH 0/2] ARM: dts: iwg20d-q7: New DT architecture Fabrizio Castro 2017-10-04 9:18 ` Fabrizio Castro 2017-10-04 9:18 ` Fabrizio Castro 2017-10-04 9:18 ` [PATCH 1/2] ARM: dts: iwg20d-q7: Rework " Fabrizio Castro 2017-10-04 9:18 ` Fabrizio Castro [not found] ` <1507108713-10686-2-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org> 2017-10-06 7:57 ` Geert Uytterhoeven 2017-10-06 7:57 ` Geert Uytterhoeven 2017-10-06 7:57 ` Geert Uytterhoeven 2017-10-06 9:01 ` Fabrizio Castro 2017-10-06 9:01 ` Fabrizio Castro [not found] ` <CAMuHMdW-Y7tK28YAGBRMqdgZK7vVqnUcud1FtzQd6wLrKii_AA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-10-06 17:59 ` [PATCH v2 0/2] ARM: dts: iwg20d-q7: New " Fabrizio Castro 2017-10-06 17:59 ` Fabrizio Castro 2017-10-06 17:59 ` Fabrizio Castro 2017-10-06 17:59 ` [PATCH v2 1/2] ARM: dts: iwg20d-q7: Rework " Fabrizio Castro 2017-10-06 17:59 ` Fabrizio Castro 2017-10-06 17:59 ` Fabrizio Castro [this message] 2017-10-06 17:59 ` [PATCH v2 2/2] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Fabrizio Castro [not found] ` <1507312793-6877-1-git-send-email-fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org> 2017-10-09 7:30 ` [PATCH v2 0/2] ARM: dts: iwg20d-q7: New DT architecture Simon Horman 2017-10-09 7:30 ` Simon Horman 2017-10-09 7:30 ` Simon Horman 2017-10-04 9:18 ` [PATCH 2/2] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Fabrizio Castro 2017-10-04 9:18 ` Fabrizio Castro 2017-10-06 7:57 ` Geert Uytterhoeven 2017-10-06 7:57 ` Geert Uytterhoeven 2017-10-06 9:06 ` Fabrizio Castro 2017-10-06 9:06 ` Fabrizio Castro
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1507312793-6877-3-git-send-email-fabrizio.castro@bp.renesas.com \ --to=fabrizio.castro@bp.renesas.com \ --cc=Chris.Paterson2@renesas.com \ --cc=biju.das@bp.renesas.com \ --cc=devicetree@vger.kernel.org \ --cc=geert@linux-m68k.org \ --cc=horms@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.