[PATCH v2 11/14] pinctrl: sh-pfc: r8a7795-es1: Use generic IOCTRL register description

[Geert Uytterhoeven <geert+renesas@glider.be>]

Move R-Car H3 ES1.x I/O voltage support over to the generic way to
describe IOCTRL registers, which will be needed for suspend/resume
support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - Add a sentinel comment, to make it more explicit that a last zero
    entry is required.
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
index 714bb3749a27ec99..1d4d84f34d6043d0 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
@@ -5423,12 +5423,21 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = {
 	{ },
 };
 
+enum ioctrl_regs {
+	POCCTRL,
+};
+
+static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
+	[POCCTRL] = { 0xe6060380, },
+	{ /* sentinel */ },
+};
+
 static int r8a7795es1_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin,
 				     u32 *pocctrl)
 {
 	int bit = -EINVAL;
 
-	*pocctrl = 0xe6060380;
+	*pocctrl = pinmux_ioctrl_regs[POCCTRL].reg;
 
 	if (pin >= RCAR_GP_PIN(3, 0) && pin <= RCAR_GP_PIN(3, 11))
 		bit = pin & 0x1f;
@@ -5745,6 +5754,7 @@ const struct sh_pfc_soc_info r8a7795es1_pinmux_info = {
 	.cfg_regs = pinmux_config_regs,
 	.drive_regs = pinmux_drive_regs,
 	.bias_regs = pinmux_bias_regs,
+	.ioctrl_regs = pinmux_ioctrl_regs,
 
 	.pinmux_data = pinmux_data,
 	.pinmux_data_size = ARRAY_SIZE(pinmux_data),
-- 
2.7.4